Wednesday, November 16, 2011

ATmega168 bootloader MICRO SYSTEM

ATmega168 bootloader MICRO SYSTEM is a single module ATmega168 microcontroller-based chip is equipped with a bootloader, so no longer needed additional device programmer to perform In-System Programming. In-System Programming can be done through the UART communication channels with the help of AVR Bootloader bootloader and software from Innovative Electronics. This module also provides a UART communication channels for communication with computers or other devices through USB, UART TTL, or RS-232 UART.

  • ATmega168 microcontroller-based features:
  • 14 kbytes of flash memory (2 kbytes 16 kbytes of flash memory used for the bootloader).
  • 1 kbytes of internal SRAM.
  • 2 pieces of 8-bit Timer / Counter and a 16-bit Timer / Counter.
  • Programmable Serial USART.
  • Master / Slave SPI Interface and byte-oriented TWI (2-Wire Interface).
  • Watchdog Timer.
  • Has 20 channels of I / O with 2 pins as ADC input channels.
  • Oscillator frequency of 7.3728.
  • Does not require a device programmer for In-System Programming.
  • Equipped with AVR Bootloader software to assist the process of In-System Programming via the UART.
  • The process of In-System Programming can be done through USB or serial RS-232 UART (via RJ-45) via a jumper setting.
  • Available communication channels UART RS-232 via the USB port (via USB to RS-232 on-board) or serial port.
  • Available tactile switches for manual reset button.
  • Available options 6-12 V input power supply (through a voltage regulator on-board) or 3.3-5V (without going through the regulator).
  • Output options are available on-board voltage regulator 3.3 V or 5 V.
  • Blue terminals are available for output voltage (VOUT) which can be used for circuit applications (VOUT = output voltage regulator on-board).
  • Dimensions: 8.8 cm (l) x 8.6 cm (w) x 1.7 cm (h)