BNO055 9 DOF Absolute Orientation IMU Module

 BNO055 9 DOF Absolute Orientation IMU Module

The BNO055 is a 9 DoF IMU sensor module that combines a 14-bit 3-axis accelerometer, 16-bit 3-axis gyroscope, 3-axis geomagnetic sensor, and 32-bit ARM Cortex-M0 microcontroller in one compact module. The resulting data output can be easily accessed by the microcontroller or mini PC via the serial interface by default, or you can also use the I2C interface by connecting the communication lines provided on the board. the serial communication line has a baud rate of 115,200 bps and the I2C line has an address of 0x50 (0x28 7 bits) with a clock of up to 400 KHz. Fully compatible with Arduino and raspberry Pi.

Feature:

- Integrated with accelerometer, gyroscope and magnetometer in one module.

- Compatible with 3.3 and 5V . working voltage

- Has a serial baud rate of 115,200 bps and an I2C line has an address of 0x50 (0x28 7 bits) clocked up to 400 KHz

- Equipped with 32-bit ARM Cortex-M0 microcontroller

- Provided 2 interface options, UART (default) and I2C

Application:

- Navigation

- Robotics

- Fitness

- Augmented Reality

- Smartphones and gadgets

ONLINE ORDER https://www.tokopedia.com/rosesana/bno055-9-dof-absolute-orientation-imu-modul

Carrier Board fot Jetson Nano Xavier NX

 Carrier Board  fot Jetson Nano Xavier NX

ONLINE ORDER

FEATURES

• Core module socket
• M.2 Key E connector
• PoE pins: PoE module is not included
• 40PIN GPIO header
• Micro USB port: for 5V power input or for USB data transmission
• Gigabit Ethernet port: 10/100/1000Base-T auto-negotiation, supports PoE if external PoE module is connected
• 4x USB 3.0 port
• HDMI output port
• DisplayPort connector
• DC jack: for 5V power input
• 2x MIPI CSI camera connector

ONLINE ORDER https://tokopedia.com/rosesana/carrier-board-fot-jetson-nano-xavier-nx

Seeed SoM - STM32MP157C Integrate Cortex-A7 plus Cortex-M4

The Seeed SoM - STM32MP157C is an SoM of ODYSSEY – STM32MP157C, based on STM32MP157C, which is a dual-core processor integrated by Arm-Cortex-A7 plus Cortex-M4, consists of the MPU, PMIC, RAM, etc.

Key Feature

• Dual-core Arm-Cortex-A7 core processor with Cortex-M4 integrated
• Open-source hardware/SDK/API/BSP/OS
• ODYSSEY – STM32MP157C SoM
• 4GB eMMC, rich interfaces for development

Description

The Seeed SoM - STM32MP157C is an SoM of ODYSSEY – STM32MP157C, based on STM32MP157C, a dual-core Arm-Cortex-A7 core processor operating at 650Mhz. The processor also integrates an Arm Cortex-M4 coprocessor, which makes it suitable for real-time tasks. The Seeed SoM - STM32MP157C consisted of the MPU, PMIC, RAM, all the necessary interfaces including Gigabytes Ethernet, WiFi/BLE, USB Hosts, MIPI-DSI, DVP for the camera, audio.meanwhile, which can be used to assemble an SBC with a carrier board. With this board, customers can deploy the SoM on their own carrier board easily and quickly.

Specification

• MPU: STM32MP157C
• 32-bit dual-core Arm Cortex-A7
• 32-bit Arm Cortex-M4 with FPU/MPU
• PMU: ST PMIC STPMIC1A
• RAM: 512MB DDR3 RAM
• Flash: 4GB EMMC
• Peripherals: 3 x Board-to-Board 70-Pin Connectors
• Size: 38mm x 38mm

Applications

• Industrial (CAN-Ethernet gateways etc)
• White goods(refrigerators, microwaves etc)
• Medical(data loggers etc)
• High-end wearables(VR device etc)
• Smart Home Devices

Grove Creator Kit - 40 Sensors

Grove is a set of modules consisting of 40 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

Kit Contains::

1 x Plastic Box

1 x Grove Creator Kit Manual (Color Printed Book)

1 x Grove - Tilt Switch

1 x Grove - Temperature Sensor

1 x Grove - Water Sensor

1 x Grove - Rotary Angle Sensor

1 x Grove - Sound Sensor

1 x Grove - Light Sensor v1.2

1 x Grove - Green LED

1 x Grove - Buzzer

1 x Grove - Magnetic Switch

1 x Grove - Line Finder v1.1

1 x Grove - Relay

1 x Grove - Vibration Sensor (SW-420)

1 x Grove - Temperature & Humidity Sensor (DHT11)

1 x Grove - Thumb Joystick

1 x Grove - Chainable RGB Led V2.0

1 x Grove - Multi Color Flash LED (5mm)

1 x Grove - Switch(P)

1 x Grove - Red LED

1 x Grove - Blue LED

1 x Grove - Button

1 x Grove - Infrared Emitter

1 x Grove - Red LED Button

1 x Grove - Yellow LED Button

1 x Grove - Blue LED Button

1 x Grove - Moisture Sensor

1 x Grove - Mini PIR Motion Sensor

1 x Grove - Loudness Sensor

1 x Grove - Infrared Receiver

1 x Grove - 16 x 2 LCD (White on Blue)

1 x Grove - Ultrasonic Ranger

1 x Grove - Hall Sensor

1 x Grove - Flame Sensor

1 x Grove - Touch Sensor

1 x Grove - 3-Axis Digital Accelerometer(±1.5g)

1 x Grove - Vibration Motor

1 x Grove - 4-Digit Display

1 x Grove - Speaker

1 x Grove - RTC

1 x Grove LED Bar v2.0

1 x Grove - RGB LED Stick (10 - WS2813 Mini)

TRN-02 Professional Version Trainer Board

TRN-02 Professional Version Trainer Board  is a trainer module is designed so complex that a variety of applications can be implemented in it

plus FREE DU-ISP V2.0 for Programming through USB Port

SPECIFICATION
- Bread board's 700 holes
- LCD with backlight
M1632 - 4 channel ADC
- The series of signal conditioners (Zero Offset and Gain)
- Voice + speakers amplifiers
0.25 W - Real Time Clock + Battery Backup
- Stepper (Unipolar & Bipolar)
- Driver DC 2A max
- Clock Generators, linear adjusted and selector
- Pulse generator, selector adjust
- 6 digits Seven Segment & ':' to clock
- 8 bit LED Logic
- 8 bit switch push button
- 8 bit Dip Switch
- Can be used for AVR microcontroller ATMega8515
- Can be used for microcontroller Renesas R8C with DST-Stamp (not included in the package)

Packages contain:
- TRN-02 module
- Plastic Box
- RS232 Cable
- ISP Cable
- 12VDC Power Supply 
- LCD with backlight
- M1632 - User Manual
- CD , Software  & Datasheet
- Black Housing 1p , 10 cable
- Black Housing 10p, 2 Cable 
- Trainner Board Professional Version User Manual

SOFTWARE SPECIFICATION
- Delta Software Studio IDE for MCS-51
- Single HWDE Software for Renesas
- Demo version for AVR Code Vision
- AVR Studio for AVR

Thermopile Sensor NICERA TSUP8-2

Thermopile Sensors NICERA TSUP8-2 (japan)

a thermopile sensor that can be used to measure the temperature of an object without direct physical contact. This sensor can measure the temperature in the range - 20 ° C to 100 ° C with an accuracy level of approximately 2 ° C.

Specification:

- Working Voltage: 5 VDC

- Current consumption: 5 mA

- Measurement range: -20 ° C ~ 100 ° C

- Accuracy: ± 2 ° C

- Constant Time: 35 ms

- EEPROM: 1 Kb via 2-wire

CMPS12 Tilt Compensated Compass Modul

CMPS12 is a compass + IMU sensor module powered by 3 different sensor types. This module is powered by a Bosch 9-axis IMU BNO055 sensor chip which consists of 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer. this module works on a range of flexible power supplies, which is between 3.3 V - 5V. This module also supports 2 types of data communication, ie I2C and serial which can be selected as needed.

Specification:
- Power Supply: 3.3V - 5V @ 18mA
- Resolution: 0.1 Degree
- Accuracy: 1%
- Signal Level: 3.3V, 5V tolerant
- I2C Bus: 400khz
- Serial Baudrate: 9600, 19200, 38400

datasheet http: // zipansion • com / gpu7

C601 Ding Dong Door Bell Preliminary design

C601 is a series of "ding dong" sounds for bell and alarm devices. This circuit works on the 1.5 - 5 VDC voltage range and has been equipped with an internal oscillator.

Specification:
- Working Voltage between 1.5 - 5.0 V
- True One Shot - One Time "Ding Dong"
- Equipped built-in Oscillator
- Dimensions: 1/2 "x 3/4"
- Pinout: VSS / GND, VDD, OUT, TRIG

PAM8403 2 X 3W 5V Mini Class D Audio Amplifier Board

Amplifier module (stereo) mini 2-channel class D with an output power of 3W. This module works on voltage level of 2.5V - 5.5V and is suitable applied to portable audio devices.

Specifications:

- Working Voltage: 2.5V - 5.5V 

- Impendasi Speaker: 4 Ohm - 8 Ohm (4 Ohm recommended) 

- Speaker Power: 2W - 8W 

- Dimensions: 21 x 18 x 3.4 mm

LED Driver 1 W for Luxeon White Green Blue

Luxeon White Green Blue LED driver with output power of 1W. This module can adjust the intensity of LED light (up to 4 pieces of Luxeon 1W LEDs strung series) using PWM.

Specifications:

- Power supply: 7 - 15 VDC

- Preset current: 285mA

- Ripple current: 4mA RMS, 26mA p-p

- Efficiency: 73% @ 12V, with 3 LED Luxeon 1W series strung

- Features: Hysteresis PFM control scheme, UVLO (Under Voltage Lock Out), LED open / short-circuit protection, thermal protection.

datasheet https://goo.gl/oDS4bV

I2C ADDA Ver 2

I / O module that provides Digital to Analog or Analog to Digital conversion. PCF8591 based which has 4 8-bit ADC channels and 1 8-bit DAC channel.

Specifications:
- Data supply: 5VDC
- PCF8591 based
- 4 channels 8-bit ADC and 1 channel 8-bit DAC
- I2C interface (can be combined up to 8 devices on same bus line)
- Compatible with DT-51 Minimum System
- Can also be connected with AVR, PIC or other microcontrollers.

ED20 Tracker Board, GSM GPRS GNSS BT3.0 IOT

ED20 Board Tracker is a location tracking module all-in-one that has been integrated with a wide selection of wireless communication. This module-based chipset which provides connections Quectel MC20 GSM, GPRS, Bluetooth, and GNSS in a single chip. 

ED20 works on frequencies GSM / GPRS 850/900/1800/1900 MHz class 12, supports the function of GPS / Beidou with accuracy up to 10 meters, and supports Bluetooth 3.0. It is suitable for the application of IOT-based object tracking.

Specifications:

- Chipset: Quectel MC20 

- Connectivity: GSM / GPRS, GNSS, Bluetooth 3.0 

- Frequency GSM / GPRS: 850/900/1800/1900 MHz class 12 

- Protocol: TCP / UDP / HTTP / FTP / PPP 

- GNSS: GPS / Beidou 

- Accuracy: 10 meters (with antenna) 

- Channel: 99 channel acquisition, 33 channe tracking 

- Power supply: 4.2 V (via VBAT), 5V (via USB port) 

- interfaces: UART, PCM, SIM2 interface, SD card interface, ADC 

- The type of SIM: SIM Nano 

- Dimensions: 48 x 39 mm

Analog Turbidity Sensor For Arduino

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.           

 Online Order

This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.

Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.

SPECIFICATION

• Operating Voltage: 5V DC
• Operating Current: 40mA (MAX)
• Response Time: <500ms li="">
• Insulation Resistance: 100M (Min)
• Output Method:Analog
• Analog output: 0-4.5V
• Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
• Operating Temperature: 5℃~90 ℃
• Storage Temperature: -10℃~90℃
• Weight: 30g
• Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches

ONLINE ORDER  https://tokopedia.com/rosesana/analog-turbidity-sensor-for-arduino

IFG001-01 SK-E Seiko SII Controller Board

Is a thermal printer controller module / device powered by CPU PTG00P01. Compatible with CAPG247 and LTPG247 thermal printers.

Specification;

- CPU: PTG00P01

- Configuration: CMOS, LSI

- Frequency: 18.43 MHz

Touchscreen HDMI LCD 3.5 inch High Speed 60Frame per second for Raspberry Pi

HDMI LCD plug-and-play with 3.5 inch width. This LCD is specially designed for Raspberry Pi. To pair LCD to Raspberry Pi is very easy, you just need to plug the LCD and HDMI sockets to the top Raspberry Pi header then in a flash LCD is ready for you to use. The LCD has a resolution of 480 x 320, supports touchscreen features, and supports graphical input via an HDMI port.

• 5V power supply
• 3.5 inch dimension
• Number of dots 480 x 320
• SPI interface
• Type lcd TFT (resistive touch screen)
• Backlight Yes
• Controller RTD2660H

ISO EM U8-P1-O8-T isolated converter 0-200mV to 0-200mV 24VDC

isolated DC-DC converter using magneto-electric method in the process of isolating the voltage. This device works to convert input voltage 0 - 200 mV into output voltage 0 - 200 mV on 24 DC power supply. This device also has a pin that serves as zero regulator, gain, and full-scale calibration in the converter.

More detailed technical information can be seen in the datasheet below.

Datasheet

ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32

wireless all-in-one (wifi + bluetooth + BLE) module targeted for diverse applications. ESP32 is powered by an ESP32-D0WDQ6 chipset powered by two active CPU cores. The CPU can work in the 80 MHz to 240 MHz frequency range.

ESP32 also has peripherals SPI, UART, I2S and I2C high-speed as a communication path to the microcontroller,

Bluetooth and wifi on ESP32 work on 2.4 GHz frequency. The bluetooth module in this device has Bluetooth configuration v4.2 BR / EDR and BLE, and wifi 802.11 b / g / n / e / i. The maximum data rate that can be transmitted over wifi is 150 Mbps.

Specification:

- Frequency: 2.4 GHz

- Wifi: 802.11 b / g / n / e /

- Bluetooth: Bluetooth v4.2 BR / EDR and BLE

- Peripherals: UART, SPI, SDIO, I2C, PWM, I2S, ADC, DAC

- Working Voltage: 2.7 ~ 3.6 V

- Power Consumption: 80 mA

- Wifi Mode: Station / SoftAP / SoftAP + Station / P2P

- Security: WPA / WPA2 / WPA2-Enterprise / WPS

- Encryption: AES / RSA / ECC / SHA

- Firmware Upgrade: UART Download / OTA

- Network Protocol: IPv4, IPv6, SSL, TCP / UDP / HTTP / FTP / MQTT

Mini Amplifier 12VDC

mini audio amplifier based on IC TDA2003. This amplifier works at a voltage of 12 VDC and can produce a maximum power output of 10 W. It is suitable for beginners who want to learn to assemble the audio device itself.

2-Axis Joystick

2-Axis This joystick can be used to add analog inputs. This joystick has 2 independent potentiometers (1 per axis) which can be used as 2 voltage divider regulator. With a modular form-factor, it allows the joystick to be directly connected to the breadboard to start a project / application.

Datasheet

SIM800L GSM GPRS Module

GSM GPRS module that supports quad-band frequency (850/900/1800 / 1900MHz). This module can be enabled to send and receive SMS from one microcontroller to another microcontroller.

Specification:

- Network: Quad-band 850/900/1800/1900 MHz

- GPRS Class: class 12

- Data Speed: 85.6 kbps

- Interface: Serial

- Working Voltage: 3.4 ~ 4.3 V

- Working Temperature: -40? ~ 85?