Thursday, December 05, 2019

PS-10 SMPS 12V 5A

An adapter SMPS 12 5A that is compatible with a wide range of products robotic, such as CM-5, CM-510, CM-530, CM-2 +, CM-700, and Robotis OP, SMPS2Dynamixel, LIPO Battery Charger LBC-10, and so forth.

Specifications:
- Output Voltage: 12V DC
- Output Current: 5A
- Frequency: 50-60 Hz
- Input: 100 - 260V AC

HPS305D Mini DC Power Supply 0-30V, 5A

A power supply that can be regulated output current and voltage. Power supply presents a single DC output, high accuracy, protection such as overload protection, overheat protection and short circuit protection, and features dual 7 segment panel to display the voltage and current values. Power supply has relatively small dimensions, making it easy to carry anywhere for various purposes such as improvement of electronic devices, research, field investigations, and so forth.

Features offered:
- Single-channel output.
- CC / CV auto switchable.
- 110V / 220V switchable.
- Equipped with protection overload protection, overheat protection and short circuit protection
- Output voltage and current can be adjusted
- Equipped with cooling fan
- Equipped display to display the voltage and current values


Specifications:
- Input Voltage: AC 110 V / 220 V, 50/60 Hz
- Output Voltage: 0-30 V
- Output Current: 0-5 A
- Resolution Voltage: 10/100 mV
- Resolution Flow: 1/10 mA
- Ripple and noise: Vp-p <1 p="">
- Dimensions: 81 × 165 × 220 mm

ROBOTIS PLAY 700 OLLOBOT

Robotis PLAY 700 OLLOBOT an educational robot kit that can be programmed and configured that will introduce children to the concept STEAM. PLAY 700 using the rivet joint design patented by Robotis and adds two elements: programming and smart device connectivity. With this kit, children can create up to six different kinds of robots, robots in question is Puppy, racecar, Windmill, Scorpion, Bird & Bear. Children can learn to assemble robots to read the manual or by viewing the guide on the application of R + DESIGN, which provides guidelines assembly in the 3D image format. This kit is also equipped with BT-410 Bluetooth module, so you can control or program the robot through an Android or iOS smartphone.


Wednesday, December 04, 2019

3D Printer Enclosure

A casing / enclosure for printers 3D engine with a maximum engine dimensions of 45x45x70 cm. Case is made of clear acrylic 5 mm on each side to create a 3D printer machine can remain visible even from outside the enclosure, and combined with a sturdy frame made of aluminum profile enclosure 2020. At the base is used by 2 cm thick hardboard that is strong enough to carry the weight of a 3D printer. This enclosure also has been equipped with two fans which serves to remove the excess heat in the case when the printing process objects. Suitable for use as casings 3D printers for a variety of users, ranging from educational institutions, hobbiyist, prototype products, and so forth.

Specifications:
- Enclosure Dimensions: 59 x 59 x 85 cm
- Dimension 3D Printer Machine Maximum: 45 x 45 x 70 mm
- Material: Acrylic clear 5 mm (side), aluminum profile 2020 (order), hardboard 2 cm (pedestal)

Tuesday, November 26, 2019

C3000 handheld UHF RFID reader

C3000 is a WindowsCE-based rugged mobile computer, featuring a powerful 800MHz processor and best in class battery performance. It can be integrated with a variety of data capture functions including LF/HF/UHF RFID reading, high-performance 1D/2D and sensitive fingerprint scanning, GPS, Camera, etc. This compact device is IP64 rated, the contained dust and water proof structure ensures its high ruggedness and durability. With its highly customizable ability, enterprises can deploy this single device in many areas, including retail, warehouse management, logistics, asset tracking, fleet management, animal management, etc


PHYSICAL CHARACTERISTICS  
Dimensions 154 × 77 × 31mm / 6.06 in x 3.03 in x 1.22 in
Weight 330g / 12.17oz (with battery)
Display 3.5″QVGA (240*320), 6.5M colors or 3.5″VGA (480*640), 6.5M colors
Keypad Numeric / Qwerty
Power Main battery: Li-ion, 3200mAh, Pistol battery: Li-ion, 5200mAh (optional)
Expansion Slot 1 PSAM, 1 SIM / PSAM, 1 MicroSD(TF) slot
Audio 0.5W speaker
Interface USB micro, RS-232, OTG
   
PERFORMANCE  
CPU Cortex-A8, 800MHz
RAM 256MB
ROM 4GB iNAND Flash, MicroSD (Max.32GB)
   
DEVELOPING ENVIRONMENT
Operating System Windows Embedded  CE6.0 Core
  Windows Embedded  CE6.0 Pro (optional)
SDK Chainway software development kit
Language C#, C++, VB.NET
Tool Microsoft Visual Studio 2005/2008
   
USER ENVIRONMENT
Operating Temp. 14°F to 122°F / -10℃ to 50℃
Storage Temp. -40°F to 158°F / -40°C to 70°C
Humidity 5%RH - 95%RH non condensing
Drop Specification Multiple 1.5m drops to concrete across the operating temperature range
Tumble Specification 1000 x 0.5m/1.64ft falls at room temperature
Sealing IP65

C72 UHF RFID Reader

C72 UHF RFID Reader
Industry-leading RFID Performance

C72 is an Android rugged RFID reader that boasts best-in-class UHF RFID capability. Built with embedded Impinj R2000 chip, it enables more than 15m of read distance outdoors. The RFID reader features optional barcode scanning, Octa-Core processor and 8000mAh powerful battery to perfectly meet demands in intensive applications, especially in asset management, retail, warehousing, apparel inventory, expressway toll, fleet management, finance, etc.

SPECIFICATIONS
Physical Characteristics
Dimensions 164.2 x 80.0 x 24.3 mm / 6.46 x 3.15 x 0.96 in.
Weight 654 g / 23.07 oz.
Display 5.2'' IPS FHD 1920 x 1080
Touch Panel Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Power Main battery: Li-ion, rechargeable, 8000 mAh
Standby: over 500 hours
Continuous use: over 12 hours (depending on user environment)
Charging time: 3-4 hours (with standard adaptor and USB cable)
Expansion Slot 1 slot for SIM card, 1 slot for SIM or TF card
Interfaces USB 2.0 Type-C, OTG, TypeC headphones supported
Audio Speaker, 2 microphones
Keypad 4 front keys, 1 power key, 2 scan keys, 1 multifunctional key
Sensors Gravity sensor, light sensor, proximity sensor

User Environment
Operating Temp. 4 °F to 122 °F / -20 °C to 50 °C
Storage Temp. -40 °F to 158 °F / -40 °C to 70 °C
Humidity 5% RH - 95% RH non condensing
Drop Specification Multiple 1.5 m / 4.9 ft. drops (at least 20 times) to the concrete across the operating temperature range
Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
Sealing Host IP65 per IEC sealing specifications
ESD ±15 KV air discharge, ±6 KV conductive discharge

Developing Environment
Operating System Android 8.1; Soti MobiControl, SafeUEM supported
SDK Chainway Software Development Kit
Language Java
Tool Eclipse / Android Studio

Performance
CPU Cortex-A53 Octa-core 2.5 GHz
RAM+ROM 3 GB + 32 GB
Expansion Supports up to 128 GB Micro SD card

Communication
WLAN IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna
WWAN (China) 2G: 900/1800MHz
3G: WCDMA: B1,B8
       CDMA2000 EVDO: BC0
       TD-SCDMA: B34,B39
4G: B1,B3,B5,B8,B34,B38,B39,B40,B41
WWAN (Others) Depending on the country's ISP
WWAN(Overseas) 2G: 850/900/1800/1900MHz
3G: B1,B2,B4,B5,B8
4G: B1,B2,B3,B4,B5,B7,B8,B12,B17,B20,B25,B40,B66
Bluetooth Bluetooth v2.1+EDR,3.0+HS,v4.1+HS
GNSS GPS/AGPS, GLONASS, BeiDou; internal antenna
Note *C72 models being manufactured for Turkish Market, do not include Voice Call (Phone Call) function. WAN module included on those models only support DATA transfer.

UHF RFID
Engine CM2000-1 module based on Impinj Indy R2000
Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
Protocol EPC C1 GEN2 / ISO18000-6C
Antenna Linear polarization(1.8 dBi); circular polarization (4 dBi)
Power 1W (30 dBm, +5 dBm to +30 dBm adjustable)
2W Optional (33 dBm, for Lati America, etc.)
R/W ranges >25 m (circular polarization, indoors); >15m (circular polarization, open outdoors, Impinj MR6 tag); >21m (linear polarization, indoors); >7m (linear polarization, open outdoors)
Reading rates (circular polarization) >200 tags/s (circular polarization)
Note *Ranges and rates depend on tags and environment
Note2 *This function is optional

Barcode Scanning
1D Linear Scanner Zebra: SE965; Honeywell: N4313
2D Imager Scanner Zebra: SE4710 / SE4750 / SE4750MR; Honeywell: N6603
1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
Note *This function is optional


Camera
Camera 13 MP Autofocus with flash

NFC
Frequency 13.56 MHz
Note *This function is optional

Iris Recognition
Rate < 150 ms
Range 20-40 cm
FAR 1/10000000
Note Protocol:ISO/IEC 19794-6,GB/T 20979-2007
Note2 *This function is optional

Saturday, November 16, 2019

Grove Creator Kit - 40 Sensors

Grove is a set of modules consisting of 40 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

Kit Contains::
1 x Plastic Box
1 x Grove Creator Kit Manual (Color Printed Book)
1 x Grove - Tilt Switch
1 x Grove - Temperature Sensor
1 x Grove - Water Sensor
1 x Grove - Rotary Angle Sensor
1 x Grove - Sound Sensor
1 x Grove - Light Sensor v1.2
1 x Grove - Green LED
1 x Grove - Buzzer
1 x Grove - Magnetic Switch
1 x Grove - Line Finder v1.1
1 x Grove - Relay
1 x Grove - Vibration Sensor (SW-420)
1 x Grove - Temperature & Humidity Sensor (DHT11)
1 x Grove - Thumb Joystick
1 x Grove - Chainable RGB Led V2.0
1 x Grove - Multi Color Flash LED (5mm)
1 x Grove - Switch(P)
1 x Grove - Red LED
1 x Grove - Blue LED
1 x Grove - Button
1 x Grove - Infrared Emitter
1 x Grove - Red LED Button
1 x Grove - Yellow LED Button
1 x Grove - Blue LED Button
1 x Grove - Moisture Sensor
1 x Grove - Mini PIR Motion Sensor
1 x Grove - Loudness Sensor
1 x Grove - Infrared Receiver
1 x Grove - 16 x 2 LCD (White on Blue)
1 x Grove - Ultrasonic Ranger
1 x Grove - Hall Sensor
1 x Grove - Flame Sensor
1 x Grove - Touch Sensor
1 x Grove - 3-Axis Digital Accelerometer(±1.5g)
1 x Grove - Vibration Motor
1 x Grove - 4-Digit Display
1 x Grove - Speaker
1 x Grove - RTC
1 x Grove LED Bar v2.0
1 x Grove - RGB LED Stick (10 - WS2813 Mini)


Grove Creator Kit - 30 Sensors

Grove is a set of modules consisting of 30 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

Kit Contains::
1 x Plastic Box
1 x Grove Creator Kit Manual (Color Printed Book)
1 x Grove - Tilt Switch
1 x Grove - Temperature Sensor
1 x Grove - Water Sensor
1 x Grove - Rotary Angle Sensor
1 x Grove - Sound Sensor
1 x Grove - Light Sensor v1.2
1 x Grove - Green LED
1 x Grove - Buzzer
1 x Grove - Magnetic Switch
1 x Grove - Line Finder v1.1
1 x Grove - Relay
1 x Grove - Vibration Sensor (SW-420)
1 x Grove - Temperature & Humidity Sensor (DHT11)
1 x Grove - Thumb Joystick
1 x Grove - Chainable RGB Led V2.0
1 x Grove - Multi Color Flash LED (5mm)
1 x Grove - Switch(P)
1 x Grove - Red LED
1 x Grove - Blue LED
1 x Grove - Button
1 x Grove - Infrared Emitter
1 x Grove - Red LED Button
1 x Grove - Yellow LED Button
1 x Grove - Blue LED Button
1 x Grove - Moisture Sensor
1 x Grove - Mini PIR Motion Sensor
1 x Grove - Loudness Sensor
1 x Grove - Infrared Receiver
1 x Grove - 16 x 2 LCD (White on Blue)
1 x Grove - Ultrasonic Ranger
1 x Grove - Hall Sensor

Grove Creator Kit - 20 Sensors


Grove is a set of modules consisting of 20 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

KIT Contains
1 x Plastic Box
1 x Grove Creator Kit Manual (Color Printed Book)
1 x Grove - Tilt Switch
1 x Grove - Temperature Sensor
1 x Grove - Water Sensor
1 x Grove - Rotary Angle Sensor
1 x Grove - Sound Sensor
1 x Grove - Light Sensor v1.2
1 x Grove - Green LED
1 x Grove - Buzzer
1 x Grove - Magnetic Switch
1 x Grove - Line Finder v1.1
1 x Grove - Relay
1 x Grove - Vibration Sensor (SW-420)
1 x Grove - Temperature & Humidity Sensor (DHT11)
1 x Grove - Thumb Joystick
1 x Grove - Chainable RGB Led V2.0
1 x Grove - Multi Color Flash LED (5mm)
1 x Grove - Switch(P)
1 x Grove - Red LED
1 x Grove - Blue LED
1 x Grove - Button
Grove Creator Kit - 20 Sensors in 1

Saturday, November 09, 2019

Kondo KHR-3HV Ver.2 Humanoid Robot


KHR-3HV humanoid robot platform is best in class with its sturdy design and the ability to perform incredible maneuvers that can not even be done by its competitors. This is made possible by the freedom of up to 22 degrees with 17 servos actual and 5 dummy servos. Dummy servos can be replaced by the actual servos to reach the 22-DOF. Yet we have seen that all the cool maneuver is possible even with 17 servo that comes with the standard package. KHR 3HV Rev 2, improves on the design of KHR 3HV successful with an improved servo 2552RHV Dual USB Adapter and the new HS. These new servo ICS3.5 protocols that make it compatible with Serial or PWM communication. Other than that, Dual USB Adapter HS enables communication with the servo directly to configure and fine-tune the servo behavior (including the new features added in ICS 3.5). The controller board RCB-4 enables the control of up to 35 serial servos. It is compatible with ICS3.5 servo protocol and various parts of choices. The board also includes several extension ports (10x A / D and 10x PIO) which allows the use of various sensors and extension options. KHR 3HV Rev 2 servos KRS-2552RHV using the latest, the interface displays the ICS 3.5. They can operate in a Daisy Chained serial protocol that allows the connection of multiple servos in a single chain reduces the amount of wiring and simplifies connections. The controller board RCB-4 enables the control of up to 35 serial servos. It is compatible with ICS3.5 servo protocol and various parts of choices. The board also includes several extension ports (10x A / D and 10x PIO) which allows the use of various sensors and extension options. KHR 3HV Rev 2 servos KRS-2552RHV using the latest, the interface displays the ICS 3.5. They can operate in a Daisy Chained serial protocol that allows the connection of multiple servos in a single chain reduces the amount of wiring and simplifies connections. The controller board RCB-4 enables the control of up to 35 serial servos. It is compatible with ICS3.5 servo protocol and various parts of choices. The board also includes several extension ports (10x A / D and 10x PIO) which allows the use of various sensors and extension options. KHR 3HV Rev 2 servos KRS-2552RHV using the latest, the interface displays the ICS 3.5. They can operate in a Daisy Chained serial protocol that allows the connection of multiple servos in a single chain reduces the amount of wiring and simplifies connections.
With Dual USB Adapter HS which is included (just in Rev 2), you can directly enhance the servo parameters and transform into a PWM operation mode, a new feature introduced in ICS 3.5.

Kondo KHR-3HV Ver.2 Humanoid Robot
Servo Specifications:
- Maximum Operating Angle: 270 degrees
- Stall Torque: 14kgf.cm (11.1V)
- Dimensions: 41 x 21 x 30.55 mm
Operating Voltage 9V ~ 12V

Tuesday, October 29, 2019

Robotis Engineer Kit 1

Robotis Engineer Kit 1 is the latest generation of robotics kit that uses smart devices to activate Artificial Intelligence (AI) capabilities, which can be used for various applications such as education, hobbies, entertainment, and even competition. Robotis Engineer Kit 1 provides a way for users to learn and explore various technologies such as AI, 3D Printing, Coding, Vision Processing, and Robotic Manipulation. Robotis Engineer Kit 1 by default can be formed into three types of robots, namely DR. R, SPI, and MAX-E1 but combined with 3D print you can make even more robots without limits according to creativity.



Controller Specifications:
- Model: CM-550
- MCU: ARM Cortex-M4
- Internal Components: Mic, buzzer, voltage sensor, gyro, accelerometer, bluetooth slave, RGB LED
- External Components: 5-pin port sensor, dynamixel X-series connector

Actuator Specifications:
- Model: 2XL430-W250-T
- Stall Torque: 1.5 N.m @ 12V
- Speed: 61 RPM (no load)
- Dimensions: 36 x 46.5 x 36 mm
- Gear Ratio: 257.4: 1
- Gear: Full Metal
- Case: Engineering plastic

Thursday, October 17, 2019

Siglent SSA3032X Spectrum analyzer 9 kHz to 3.2 GHz

Siglent SSA3032X Spectrum analyzer 9 kHz to 3.2 GHz 
With latest hardware installed! Serial number above 60110

SSA3000X series spectrum analyzer has a frequency range from 9 kHz up to 3.2 GHz, it is light weight and small size, with an user friendly interface, concise style of display, reliable measurement precision and plenty of RF measurement functions. Applicable to research and development, education, production, maintenance and other related fields, that meets a wider range of application requirements.


All-Digital IF Technology
Frequency Range from 9 kHz up to 3.2 GHz
-161 dBm/Hz Displayed Average Noise Level (Typ.)
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
Total Amplitude Accuracy < 0.7 dB
1 Hz Minimum Resolution Bandwidth (RBW)
Standard Preamplifier
10.1 lnch WVGA(1024x600)Display
Up to 3.2 GHz Tracking Generator Kit (Opt.)
EMI Pre-compliance Measurements Kit (Opt.)


Accessories included :
1 x USB Cable 
1 x Quick Start
1 x Calibration Certificate and Product Certification
1 x Power Cord 220V EU 
1 x CD (Including Quick Start, Data Sheet and Application Software)

Tuesday, September 10, 2019

Siglent SDS 1052DL+

Siglent SDS1052DL+ Digital Oscilloscope

The SDS1052DL+ is a dual-channel digital oscilloscope with bandwidth of 50MHz, 500MSa/S real-time sample rate and 50 GSa/s equivalent sample rate.
The device includes the ability to use 2 channels at the same time, and also includes 1 external triggering channel built into the device. Results are shown as clear waveforms on the SDS1052Dl’s 7-inch colour TFT screen, and the device also has backlit buttons for easy interpretation in low light conditions.
Also includes in the SDS1052DL+ are multiple trigger modes; edge, pulse, slop, video and alternate trigger modes are available.  The device also features memory depth of 32kpts and vertical sensitivity range of 2mV/div – 10V/div.
The SDS1052DL+ also has built in digital filter and a recorder function for storing test data. It also has USB and RS-232 ports for downloading this data to PC, and the interface of the device is available in 12 different languages.

Accessoires:

  • SDS1052DL+ Digital Oscilloscope
  • Set of probes
  • USB Cable
  • Manual
  • 220V AC EU power cord ( unit is 220V and 110V selectable )
  • CD inlcuding Software / manual (Windows XP, Vista, 7)

Siglent SDS1102CML

Siglent SDS1102CML 100MHz Dual-Channel Oscilloscope

The SDS1102CML is a dual-channel digital oscilloscope with in-built single-shot bandwidth of 100MHz, single real-time sampling rate up to 1GSa/s and equivalent sampling rate up to 50GSa/s and memory depth of 2Mpts.
All of Siglent’s CML range of oscilloscopes also come as standard with a large, 7-inch LCD screen for viewing and monitoring changes in waveforms. This screen is also presented in full colour, allowing users to easily identify waveforms and track them accurately.
The CML range also includes unique digital filter functions that allow users to use high pass, low pass, band pass and band stop digital filters to extract noise from readings, multiple trigger types (Edge, Pulse, Video, Slope and Alternative) and also includes the ability to extract data using the included USB and RS-232 ports. This data can then be analysed at a later time using the included software package (which also enables remote operation of the oscilloscope).

Accessoires Included:

  • Digital oscilloscope unit (1 pc.)
  • Probe (1:1, 10:1) Problex (2 pc.)
  • Power cord (1 pc.)
  • USB cable (1 pc.)
  • EasyScope CD (1 pc.)
  • User Manual (1 pc.)

Wednesday, August 28, 2019

RPLIDAR A3 Laser Range Scanner for indoor and outdoor

RPLIDAR A3 is a 2D sensor 360 degree LIDAR developed by SLAMTEC. These sensors can do scanning of 16,000 samples per second with a high rotation speed. RPLIDAR A3 has also adopted OPTMAG technology which has been patented, this technology is claimed to be able to make the life of the sensor is much longer than conventional LiDAR sensors. RPLIDAR A3 can perform 2D scanning scan 360 degrees with a maximum radius of 25 meters, the results of the scan can be used for mapping / mapping. RPLIDAR A3 scanning frequency on by default is 15 Hz @ 600 RPM but the frequency can still be set in the range of 5-20 Hz according to user needs.

Specifications:
- Detection range: 25 meters (white object), 10 meters (objects black) 
- Free Sampling 16 KHz 
- Speed Scanning: 15 Hz (typical) 
- Resolution angle: 0225 degrees 
- Communications: UART TTL 
- Data Rate: 256,000 bps

Sample Applications:
- Navigation and mapping on the robot. 
- mapping the three-dimensional environments. 
- Industrial robots. 
- General Simultaneous Localization and Mapping (SLAM) 
- home cleaning robots.