Planetary Gearbox

Planetary gear box motor production Tamiya

Specification:
- Has a 4: 1, 5: 1, 16: 1, 20: 1, 25: 1, 80: 1, 100: 1, and 400: 1 gear ratio.
- Using Mabuchi RC-260 motor with 3-5V power supply

datasheet http: // zipansion • com / 18dXv

GM250028 DC Gear Motor

GM250028 DC Gear Motor, 12V, 1:28, 300rpm. DC motor already equipped with gearbox

• Working voltage 12 VDC
• Current consumption 1.9 A (max)
• Maximum torque 1.82 kg • cm (stall)
• Maximum rotation speed of 300 rpm
• Shape shape & size of cylinder, 9.5 mm
• Dimensions without shaft 54 mm (length) x 25 mm (diameter)
• 1:28 gear box comparison

DC Gear Motor 12V 1:220 38rpm

12V DC motor with 1:20 gearbox ratio, torque 8.6 Kg • cm, and round speed 38 RPM.

• Working voltage 12V
• Maximum torque 8.6 Kg • cm
• Maximum rotation speed is 38 RPM
• Gear box Yes
• 1: 200 gear box comparison

GM420024-SY DC Gear Motor, 12V, 1:24, 2 channel magnetic encoder

GM420024-SY DC Gear Motor, 12V, 1:24, 2 channel magnetic encoder

DC motor with 2 magnetic encoder channels of 38 poles of magnet per round suitable for robotics applications.

Datasheet https://goo.gl/uRvNGN

Typhoon H is a Yuneec Americas brushless DC motor with 750 KV power. Suitable for drone, RC, speedboat, and so forth.

High Torque DC Geared Motor 300rpm

12 V DC motor equipped with gearbox to maximize its performance. This motor is capable of producing torque of 9 kg-cm with a rotation speed of 300 RPM. This motor is very suitable for robotics applications, automation systems, mechanical drivers, and so forth.

• Working voltage 12 VDC
• Consumption of no-load current 1.5 A
• Current consumption of 5 A (max.)
• Maximum torque is 9 kg-cm
• Maximum rotation speed of 300 rpm
• Shaft shape & size 25 mm (length)
• Dimensions without 63 mm shafts
• Gear box Yes

Mini Micro Submersible water pump motor DC 3V-6V 120LH

It is a miniature water pump powered by a brushless DC motor that operates at a voltage of 3 VDC - 6 VDC. Mini water pump is usually used in irrigation systems hydroponics plants, robotics, and so forth.

Specification:

- Working Voltage: 3 - 6 VDC

- Flow Rate: 80 - 120 L / hr

- External Diameter: 7.5 mm / 0.3 "

- Inner Diameter: 4.7 mm / 0.18 "

- Overall Diameter: 24 mm / 0.95 "

- Length: 45 mm / 1.8 "

- Height: 33 mm / 1.30 "

- Material: Plastic

- Mechanical Mover: Brushless DC Motor

- Working Time: 500 hours

- Cable Length: 21 cm

MINI SUBMERSIBLE WATER PUMP DC 12V 240L/H

mini water pump powered by a 12 VDC DC brushless motor. This mini water pump is able to pump air as much as 240 liters per hour (240 L / h) with a power of only 4.2 watts only. This mini water pump is perfect for aquariums, hydroponic plant irrigation systems, robotics, microcontroller output devices, and so forth.

Specification:

- Black

- Material: ABS

- Liquids: Water, oil, fuel, alkaline liquids, acidic liquids, and various other liquids.

- Data Consumption: 4.2 W (0.35 A)

- Working Voltage: 12 VDC

- Pump Speed: 240 L / h

- Maximum Lift: 300 cm

- Level of Flash: <35 db="" font="">

- Outside Diameter / Outlet: 9 mm / 0.35 "

- Diameter In / Outlet: 6 mm / 0.24 "

- Water Resistantity: IP68

- Dimensions: 56 x 52 x 47 mm

RF-300FA-12350 Spindle Motor for DVD CD Player 5.9VDC

DC spindle motor for CD or DVD player device. This motor works on a voltage of 5.9 V and capable of producing rotation up to 3500 rpm speed.

Datasheet

• Working voltage 1.5 - 6 V
• Consumption of no-load current 22 mA
• The current consumption is 93 mA
• Maximum torque is 4.9 g / cm
• Maximum rotation speed 3500 rpm

DC motor HYX030-P5

HYX030-P5 is a DC motor equipped with a gearbox ratio of 1:40. This motor work at voltage level 3 - 6 VDC and able to produce maximum torque output 5 kgf.cm with rotation speed 100 - 230 RPM. This motor is very suitable for robotics applications.

• Working voltage 3 - 6 VDC
• Consumption of no-load current 100 - 350 mA
• Maximum torque of 5 kgf.cm
• The maximum rotation speed is 230 RPM
• Gear box Yes
• 1:40 gear box comparison

HKT3203-302G-1024BZ3-5E Rotary Encoder with shaft bore on housing

A pair of rotary encoder that serves to monitor the angular position of a shaft. Rotary encoder is usually used on motors, especially for industrial robotics and control applications.

Specification:

- Working Voltage: 4.5 - 5 VDC

- Flow: <65 font="" ma="">

- Frequency: 0 - 100 KHz

- Insulation Barriers:> 100 MOhm

- Working Temperature: - 40 ° C - 85 ° C

- Weight: 80.8 gr

HKT5610-301G-1024BZ3-5E Rotary Encoder with shaft bore on housing

Rotary encoder that serves to monitor the angle position of a shaft. Rotary encoder is usually used on motors, especially for industrial robotics and control applications.

Specification:

- Working Voltage: 5 VDC

- Current: <100 font="" ma="">

- Frequency: 0 - 100 KHz

- Waveform: Reactangle wave

- Symmetry: 0.5 T ± 0.1 T

- Windage Axis: ± 0.1 mm

- Windage Radial: ± 0.015 mm

- Moment of Inertia: 5 x 10 ^ -7 Kgm²

- Vibration Resistance: 50 m / s², 10 ~ 200 Hz

- Shock Resistance: 980 m / s², 6 ms

- Standardization: IP50

- Working cycle: 20,000 hours

- Working Temperature: - 40 ° C - 120 ° C

HYX031-P6 DC Gear Motor 5V, 1:120, 98rpm, (1:120)

HYX031-P6 is a DC motor that has been equipped with a gearbox ratio of 1: 120. This motor operates at a working voltage of 3 - 6 V with a torque output of 3-6 kg-cm. This motor is capable of producing rotation speed up to 98 rpm. It is suitable for robotic applications.

• Working voltage 3 - 6 V
• Consumption of no-load current -
• Current consumption 70 - 560 mA
• Maximum torque is 6 kg-cm
• Maximum rotation speed is 98 rpm
• Shape shape & size -
• Dimensions without shafts 27 x 44 mm
• Gear box Yes
• 1: 120 gear box comparison

EMG30 GearMotor with Encoder

DC motor equipped with gearbox and encoder (Pulse encoder per round: 360).

• Working voltage 12VDC
• Consumption of no-load current 530mA (no Load)
• Consumption of current 2.5A (load-bearing)
• Maximum torque 1.5kg.cm
• Maximum rotation speed is 170rpm
• Gear box Yes
• 30: 1 gear box comparison

GM10 Geared Pager Motor

Gear motor that has a gear ratio of 81: 1,
  Torque 3.6 in * oz @ 5V,
and a speed of 370 rpm @ 5V

GM11 Mini Metal Gear DC Motor 75.7:1

DC motors are equipped with metal gearbox and has a small physical shape

Specification:

- Power Supply: 5VDC / 650mA

- No-load speed: 246 rpm

- Torque: 200gf-cm

- Configuring the output shaft: horizontal

- Direction of motor rotation: CW and CCW

Plastic Gear Motor L Set

Plastic Gear Motor L Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Gear Box with 90 deg shafts in each respective dc motors, making this product suitable for applications wheeled robot kit.

Equipment:

- Nuts and Bolts 2 mm 2x15 mm.

- Mur 3 mm and 3x8 mm Bolt.

- Motorcycle.

- Bracket.

- Wheel Driving.

- Castor (free wheel).

- Plastic Spacer bolt 28 mm and 3x5 mm.

Plastic Gear Motor I Set

Plastic Gear Motor I Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Gear Box with offset shaft on each individual dc motor, makes this product suitable for applications wheeled robot kit.

Equipment:
- Nuts and Bolts 2 mm 2x15 mm.
- Mur 3 mm and 3x8 mm Bolt.
- Motorcycle.
- Bracket.
- Wheel Driving.
- Castor (free wheel).
- Plastic Spacer bolt 28 mm and 3x5 mm.

datasheet

Mini Metal Gear Motor Set

Mini Metal Gear Motor Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Metal Gear in each respective dc motors, making this product suitable for applications wheeled robot kit.

Attachment: Mur 3 mm and 3x8 mm bolt, Clamp, Motor, Bracket, Wheel Driving, Castor (free wheel), plastic Spacer bolt 30mm and 3x5 mm.

GT5 Gear Motor

DC motor kit that has accompanied the gear box with a gear box ratio of 1:48. These motors work at a voltage level of 3 V - 7.2 V and is capable of producing a maximum torque of up to 1.5 kg-cm. This bike is perfect when applied to the field of robotics, especially in the field of mobile robots.

Specification:
- Working Voltage: 3 - 7.2 VDC
- Workflow: 160-250 mA
- Speed Round: 120-250 RPM
- Maximum Torque: 0:45 - 1.5 kg.cm
- Comparison Gear Box: 1:48