Arduino Portenta H7

The Arduino Portenta H7 is based on the STM32H747 microcontroller, XI series.

Online Order

Use Portenta when performance is key, among other cases, we envision it to be part of:

• High-end industrial machinery
• Laboratory equipment
• Computer vision
• PLCs
• Industry-ready user interfaces
• Robotics controller
• Mission-critical devices
• Dedicated stationary computer
• High-speed booting computation (ms)

Online Order

Tech specs:

MICROCONTROLLER STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU (datasheet)

RADIO MODULE Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth 5.1 BR/EDR/LE (datasheet)

SECURE ELEMENT (DEFAULT) NXP SE0502 (datasheet)

BOARD POWER SUPPLY (USB/VIN) 5V

SUPPORTED BATTERY Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)

CIRCUIT OPERATING VOLTAGE 3.3V

CURRENT CONSUMPTION 2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)

DISPLAY CONNECTOR MIPI DSI host & MIPI D-PHY to interface with low-pin count large display

GPU Chrom-ART graphical hardware Accelerator™

TIMERS 22x timers and watchdogs

UART 4x ports (2 with flow control)

ETHERNET PHY 10 / 100 Mbps (through expansion port only)

SD CARD Interface for SD Card connector (through expansion port only)

OPERATIONAL TEMPERATURE -40 °C to +85 °C

MKR HEADERS Use any of the existing industrial MKR shields on it

HIGH-DENSITY CONNECTORS Two 80 pin connectors will expose all of the board's peripherals to other devices

CAMERA INTERFACE 8-bit, up to 80 MHz

ADC 3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)

DAC 2× 12-bit DAC (1 MHz)

USB-C Host / Device, DisplayPort out, High / Full Speed, Power delivery

ONLINE ORDER https://tokopedia.com/rosesana/arduino-portenta-h7

Lite version order https://tokopedia.com/rosesana/arduino-portenta-h7-lite 

Breakout Board order  https://tokopedia.com/rosesana/arduino-portenta-breakout

Gravity: D3 Kit - A Comprehensive Kit for Education

An Arduino learning kit based on DFRduino Mega 2560 (Arduino Mega 2560 compatible) combined with 34 components such as sensor modules, shields, actuators, and optional I / O modules that will facilitate your learning process. In each module contained in this kit, there are already examples of hardware connections along with examples of source code / coding which will certainly spoil you in learning each sensor / module IO / actuator function. Everything you need is on the wiki page that has been provided. It is suitable for you who are just starting to learn Arduino or for you teachers who want to teach Arduino to their students.

Product Equipments

• DFRduino Mega 2560 x1 
• Mega IO Expansion Shield V2.3 x1 
• I2C LCD1602(Arduino Compatible) x1 
• Relay Module V2 x1 
• LM35 Analog Linear Temperature Sensor x1 
• Analog Ambient Light Sensor x1 
• Digital Vibration Sensor x1 
• Digital Tilt Sensor x1 
• Digital Push Button x1 
• Capacitive Touch Sensor x1 
• Digital piranha LED light module-White x1 
• Digital piranha LED light module-RED x1 
• Digital piranha LED light module-BLUE x1 
• Digital Buzzer Module x1
• Digital magnetic sensor x1
• Analog Sound Sensor x1
• Analog Rotation Sensor V2 x1
• Joystick Module (DFR0061)   x1
• Flame sensor (DFR0076)   x1
• DIGITAL IR Transmitter Module(Arduino Compatible) x1
• Light Disc with 7 SMD RGB LED x1
• IR Kit For Arduino x1
• DFRduino Ethernet Shield (Support Mega and Micro SD) x1
• Triple Axis Accelerometer MMA7361 x1
• URM37 V3.2 Ultrasonic Sensor x1
• Digital Infrared motion sensor x1
• Adjustable Infrared Sensor Switch x1
• Analog Gas Sensor(MQ5) x1 
• 9g micro servo (1.6kg) x1
• Micro DC Geared Motor with Back Shaft x2
• USB Cable A-B for Arduino x1
• 2A Motor Shield For Arduino x1
• Water Sensor x1
• Soil Moisture Sensor x1
• LSM303 Breakout Board x1

Seeeduino XIAO - Arduino Microcontroller - SAMD21 Cortex M0+

Seeeduino XIAO is an Arduino compatible mini microcontroller which comes with a powerful MCU chip with low power consumption, namely SAMD21G18 ARM® Cortex®-M0 +. On the other hand, this tiny microcontroller board has good performance in data processing and instructions but still requires low power. The small design also makes it usable for creating wearable projects and other small projects. Beyond its powerful CPU, Seeeduino XIAO also presents a variety of amazing functions. This board has 14 GPIO pins, of which 11 pins can be used as analog I / O, 11 digital pins, I2C, UART, and SPI. Some pins also have various functions, pins A1 / D1 to A10 / D10 have PWM functions and pins A0 / D0 have DAC functions. Seeeduino XIAO supports USB TYPE-C interface for power supply lines and for downloading data from a computer to the microcontroller chip. This board also provides a power pad to line the power supply through the battery, so it can be the perfect solution for your wearable project.

Product Features

• Powered by a powerful microcontroller chip, the SAMD21G18 ARM® Cortex®-M0 + with 256 KB flash memory and 32 KB SRAM
• Compatible with Arduino IDE
• Can be applied with breadboard for prototyping project
• Has a small size that is only as big as a thumb (20 x 17.5 mm) so it is very suitable for wearable projects
• Provides abundant development interfaces such as 11 digital / analog pins, 10 PWM pins, 1 DAC output, 1 SWD Bonding pad interface, 1 I2C pin, 1 UART pin, and 1 SPI pin.

Specification

• Working Voltage: 3.3V
• MCU: SAMD21G18 ARM Cortex-M0+ @ 48 MHz
• Memori: 256 KB Flash,32 KB SRAM
• I/O: 14 GPIO,11 analog, 11 digital, 1 DAC output
• Antarmuka: I2C, UART, SPI
• Power Supply and Data Download Line: USB Type-C 
• LED: 1x user LED, 1x power LED, 2x LED untuk serial port downloading
• Reset button: two reset button short connect to reset
• Power Pads: For power supply via batteries
• Software: Arduino IDE
• Protection: Projection cover to protect electronic network
• Dimensi: 20 x 17.5 x 3.5 mm

Product Equipments

• 1 x Seeeduino XIAO - Arduino Microcontroller - SAMD21 Cortex M0+ 
• 2 x 7 pins header
• 4 x pasters

Note:  This microcontroller works at 3.3V voltage level, giving an input voltage exceeding 3.3V to the I / O pin potentially damaging the microcontroller chip.

Arduino 101 Starter Kit

The Arduino 101 Starter Kit is a kit
ready-to-use learning that consists of
Arduino 101 microcontroller and some modules
sensors and actuators.

With this kit you will find it easier to learn how Arduino works, the I / O pin function,

communication with Arduino interface,

send and retrieve data from I / O pins,

etc.

In addition to this kit has also been provided

a project guide book containing sample projects and how to program them.

Arduino Maker Kit

The Arduino Maker Kit is a ready-to-use learning kit consisting of the DT-AVR UNO R3 microcontroller and several sensor modules and actuators. With this kit you will find it easier to learn how Arduino works, the I / O pin function,

communication with Arduino interface, send and retrieve data from I / O pins, and so on.

In this kit you will get:

- 1x DT-AVR UNO R3

- 1x I / O expansion shield

- 1x LED module

- 1x Buzzer module

- 1x IR sensor

- 1x Temperature Sensor

- 1x PIR Sensor

- 1x LDR sensor

- 1x Digital push button

- 1x Rotation sensor

- 1x Micro servo

- 1x Micro USB cable

Arduino data logging shield

Aduino compatible datalogger module with data storage method via SD card. This datalogger module can write and read data from SD card with FAT16 and FAT32 format. The device also features DS1307Z-based Real Time Clock (RTC) and an internal 3.3V shiftter level to prevent damage to your SD card.

Infra red Kit For Arduino

This kit is used to add remote remotely control to the Arduino project or other microcontroller projects.

Specification:
- Working voltage: 5 VDC
- Interface: Digital
- Frequency: 38 kHz
- There are examples and library of Arduino on this link.
- Equipment: 1x IR Remote Controller (With battery CR2025), 1x IR Receiver Module and 1x Digital Cable

datasheet https://goo.gl/gVmLaU

Analog Turbidity Sensor For Arduino

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.           

 Online Order

This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.

Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.

SPECIFICATION

• Operating Voltage: 5V DC
• Operating Current: 40mA (MAX)
• Response Time: <500ms li="">
• Insulation Resistance: 100M (Min)
• Output Method:Analog
• Analog output: 0-4.5V
• Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
• Operating Temperature: 5℃~90 ℃
• Storage Temperature: -10℃~90℃
• Weight: 30g
• Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches

ONLINE ORDER  https://tokopedia.com/rosesana/analog-turbidity-sensor-for-arduino

Ethernet Shield W5100 R3

Is an ethernet shield compatible Arduino based on W5100 chip. This Shield allows the Arduino board to connect to the internet via ethernet. This shield supports TCP & UDP network protocol and provides microSD slot for storing data on Arduino via SPI bus communication.

Specification:

- Chipset: W5100

- Ethernet: 10/100 Mbps

- Protocol: TCP, UDP

- Memory: 16 KB (for buffer TX / RX)

- Working Voltage: 3.3 V

- Supports auto MDI / MDIX

- Supports ADSL Connection

Romeo for Intel Edison Controller Without Intel Edison

Romeo for Intel® Edison is a controller board all-in-one designed for the purpose of development project - project-based IntelRomeo for Intel® Edison Edison and Arduino. Romeo for Intel® Edison is compatible with the Arduino open source platform and Linux, and supports the Java development environment and C. This device allows you to add various kinds of shield and modules, such as switches, LEDs, LCDs, sensors, motors, and servo into A board. Romeo for Intel® Edison also can function as a standalone device to communicate with software such as Flash, Processing, MAX / MSP, or VVVV.

At Romeo for Intel® Edison has also been integrated with L298P motor driver IC. The IC can provide 2-way drive on a DC motor with a maximum current output of 2 amperes. Romeo for Intel® Edison is ideal for robotics applications.

Specification

- Working Voltage: 5V

- Output Voltage: 5 V / 3.3 V

- Input Voltage: 6 - 20 V

- Digital I / O: 14

- I / O Analog: 6

- Flow Per I / O: 10 mA

- Output Current Driver: 2 x 2A

- Dimensions: 100 x 88 x 15 mm

Features:

- Supports SPI programming port

- Supports I²C interface

- Supports 2-way DC motor control

- Supports 43 340 Broadcom 802.11 a / b / g / n dual band (2.4G and 5GHz) Wi-Fi

- Support bluetooth 4.0

- Supports USB OTG

Music Shield for Arduino

Music Shield is an Arduino compatible module that you can use to play music from micro SD. This module uses the VS1053B IC as its audio decoder, which IC can be used to decode audio files with MP3, WAV, MIDI, and Ogg Vorbis extensions. In addition, this module has also provided a library that will allow you to develop Arduino-based projects using this module.

Features:

- Using 5 VDC power supply

- Supports micro SD storage up to 2 GB capacity

- Compatible with Arduino / Seeeduino, Arduino Mega, and Seeeduino Mega

- Equipped with 2 push-push buttons and a knob switch

- Supports MP3, WAV, MIDI, and Ogg Vorbis audio formats

- Equipped I2S interface for external DAC

- Equipped 3.5 mm audio jack as audio output line

- The sound quality is amazing with the frequency response ± 1dB

- Meet FFC standards

Sparkfun MP3 Player Shield arduino compatible

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.

The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.

This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the Arduino R3 Stackable Header Kit.

Features:

• 3.5mm audio out jack
• 0.1" spaced header for speaker out
• microSD card slot

3-wire Serial LCD Module (Arduino Compatible)

graphics LCD module (arduino compatible) with a resolution of 128 x 64 pixels which supports the reading of English characters, Chinese characters, as well as graphical characters. The LCD module is equipped with features backlit controls, parallel control and brightness control. This module can communicate with your microcontroller through two different interfaces, namely parallel and 3-wire (SPI).

• The power supply 4.5 - 5.5 V
• Dimensions 93 x 70 x 22 mm
• The number of dots 128 x 64
• Parallel interfaces and 3-Wire
• Type LCD Graphic LCD (STN)
• backlight Yes
• controller -
• View area of 73 x 39 mm

BLE Shield v2.1 Bluetooth 4.0 Low Energy

modules / shield Bluetooth Low Energy (BLE) BLE nRF8001-based chip that is designed for board-board Arduino, such as the Arduino Uno, Arduino Mega, Arduino Due, and Arduino Leonardo. This module allows the Arduino to communicate with devices - devices such as PCs, smartphones, and tablets via Bluetooth Low Energy communication protocol, so with this shield then you can develop a project based wireless arduino BLE, such as:
- Control pin I / O via the mobile application.
- Sending of sensor data from the Arduino to your PC or smartphone.
- Make PC / smartphone as an Internet gateway for Arduino.
- And many more.

• The power supply 3.3 or 5 V
• Working frequency of 2.4 GHz
• interface ACI
• Class Bluetooth 4.0 Low Energy
  
  
  
  

Arduino Tian

The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 533MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian has also a build in 4GB eMMC memory that will can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.

NB: In some countries, it is prohibited to sell WiFi enabled devices without government approval. While waiting for proper certification, some local distributors are disabling WiFi functionality. Check with your dealer before purchasing a Tian if you believe you may live in such a country.

NB.Before to start to run Arduino Tian must install CP201x driver on the computer. 

Technical specs

• Arduino Microprocessor
• Processor Atheros AR9342
• Architecture MIPS
• Operating Voltage 3.3V
• Flash Memory 16MB + 4GB eMMC
• Ram 64MB DDR2
• Clock Speed 560 MHz
• WiFi 802.11 b/g/n 2.4 GHz dual-band
• Ethernet 802.3 10/100/1000 Mbit/s
• USB 2.0 HostArduino Microcontroller
• Microcontroller SAMD21G18
• Architecture ARM Cortex-M0+
• Operating Voltage 3.3V
• Flash Memory 256 KB
• SRAM 32 KB
• Clock Speed 48 MHz
• Analog I/O Pins 6
• DC Current per I/O Pins 7mA (I/O Pins)General
• Input Voltage 5 V
• DAC
• PWM Output 12
• Power Consumption 470 mA
• PCB Size 53 x 68.5 mm
• Bluetooth CSR8510, Bluetooth with EDR / BLE 4.0
• Weight 36g

LattePanda 4G/64GB Single Board Computer (Without Win10 License)

LattePanda 4G / 64 GB is a mini PC that has been integrated with the Arduino microcontroller board. Mini PC is capable of running the Linux operating system and Windows 10 that already exist inside Visual Studio, NodeJS, Java, Processing, and more.

Mini PC is powered by an Intel Cherry Trail Z8300 Quad Core 1.8 GHz, 4 GB DDR3L RAM, 64 GB of internal memory, and processor ATmega32u4 aide to function like Arduino Leonardo. In addition, the mini PC is also equipped with WiFi and Bluetooth 4.0 as a means of wireless communication.

Specification:

- Processor: Intel Cherry Trail Z8300 1.8GHz Quad Core

- Default Operating System: Windows 10 (without a license)

- RAM: 4 GB DDR3L

- Internal Memory: 64 GB

- USB: 1x USB 3.0, 2x USB 2.0

- Wireless Communications: WiFi and Bluetooth 4.0

- Processor Assistant: ATmega32u4 (Arduino Leonardo)

- GPIO: 2 GPIO for Intel chips and 20 GPIO for Arduino

- Power Supply: 5V / 2A

- Supported Operating Systems: Windows 10 & Linux

- Dimensions: 2.76 inches x 3:46

- Weight: 101.4 g

ATmega32u4 Specifications:

- Data Bus Width: 8 bit

- Clock Speed: 16 MHz

- Memory flash: 32 kB

- RAM: 2.5 Kb

- ROM: 1 Kb

- Resolution ADC: 10 bit

- Number of ADC Channel: 12

- Working Voltage: 2.7 - 5.5 V

- Interface: SPI, TWI, USART

- Number of I / O: 26 I / O

- Number Timer: 5 Timer

documentation:

http://www.lattepanda.com/docs/

DFPlayer Mini - MP3 Player for Arduino

A DFPlayer an MP3 player module for Arduino That review has Small size and output can be paired Jump Into speaker. DFPlayer singer can be used as a stand-alone module WITH adding battery, speaker, and push button, OR can also using combination Arduino microcontroller lie And Yang has the ability TX / RX.

DFPlayer Singer supports multiple audio formats IN general, such as MP3, WAV, WMA and And has support micro SD WITH TYPE FAT16 and FAT32 file systems.

specification:

- Working voltage: 3.2 to 5 V

- Output: 24-bit DAC

- SNR: 85 dB

- Compatibility File Systems: FAT16 and FAT 32

- Maximum Storage Capacity: 32 GB Micro SD And NORFLASH 64 MB

- Control Mode: Mode Control I / O, serial mode, the mode button AD Controls

- Operates Audio Formats: MP3, WAV, WMA

- Period Audio Files: 255 Audio file (Maximum)

- Equalizer: level 6

- Volume: 30 levels

Xbee Shield for Arduino

XBee Shield for Arduino is a module / shield is designed to allow you to add a variety of wireless communication such as wifi, Bluetooth, and Zigbee into the Arduino microcontroller board.

With the shield, you can directly connect to an Arduino XBee module through the socket provided on this shield. In this module has also been accompanied by a voltage converter 5 V - 3.3 V internal, making it safe for your XBee modules.

In addition to supporting the XBee, this shield also supports some wifi and bluetooth module, such as wifi bee, bee bluetooth 2.0, bluetooth 4.0 bee, and also ESP8266 wifi bee.

Specification:

- Kompabilitasa; XBee Series 1 (standard and pro), the XBee Series 2 (standard and pro), ESP8266 wifi bee, bee bluetooth 2.0, bluetooth 4.0 bee

- Can be coupled directly to an Arduino Uno, Arduino Leonardo, Arduino Duemilanove

- Programming can be done wirelessly

- Equipped with a jumper to move the communication between a PC to an Arduino XBee

ITEAD Xbee Shield Module For Arduino UNO MEGA Nano DUE

A shield / breakout board is designed to allow you to connect to an Arduino XBee module. With this shield you can directly connect your own XBee module to the Arduino via the XBee socket which has been available on this shield. Shield has full compatibility of the module XBee Series 1 and Series 2, both the standard version and a pro version.

Specification:

- Power Supply: 5 V

- Flow Output: 500 mA (max)

- Consumption Current: 20 mA

- Compatibility: Arduino Uno, Mega, Nano, Due, Duemilanove

- Dimensions: 54.9mm x 58.8mm x 1.6mm

- Indicators: PWR State, DI, DO, RSSI, ON, ASS

- Protocol: UART / XBee

Note: The sales package does not include modules XBee and Arduino

Genuino 101: Balance Robot kit

Genuino 101 Balancing Robot Kit is a mini version of a segway that we often see. Genuino 101 Balancing Robot Kit is a two-wheeled robot that can stand up to balance its position continuously. This robot uses Genuino microcontroller 101 as the center controlling the whole movement and a gyro sensor and accelerometer 6-axis have also been embedded in Genuino 101 as a sensor to keep his balance. In addition to the robot is also equipped with LED indicators and LCD to simplify the user in understanding the working status of the robot.

With these features, the Genuino 101 Balancing Robot Kit is ideal when used as a medium of learning about microcontrollers, robotics, and the application of the concept of PID in daily life - the day, be it for students, students and hobbyist.

Specification:

- Power Supply: Battery Turnigy Nano Tech 11.1 V 1000 mAh

- Controller: Genuino 101

- Driver: EMS 2A Dual H-Bridge

- Motor: GM250028 12V 300 RPM

- Battery Life: ± 3 hours

- Body Material: Acrylic 3 mm

- Work Terrain: Surface / flat surface (floor tiles, wooden tables, glass, etc.)

- Features: Equipped with LED indicators and LCD to facilitate understanding of robots working status