Gravity: D3 Kit - A Comprehensive Kit for Education

An Arduino learning kit based on DFRduino Mega 2560 (Arduino Mega 2560 compatible) combined with 34 components such as sensor modules, shields, actuators, and optional I / O modules that will facilitate your learning process. In each module contained in this kit, there are already examples of hardware connections along with examples of source code / coding which will certainly spoil you in learning each sensor / module IO / actuator function. Everything you need is on the wiki page that has been provided. It is suitable for you who are just starting to learn Arduino or for you teachers who want to teach Arduino to their students.

Product Equipments

• DFRduino Mega 2560 x1 
• Mega IO Expansion Shield V2.3 x1 
• I2C LCD1602(Arduino Compatible) x1 
• Relay Module V2 x1 
• LM35 Analog Linear Temperature Sensor x1 
• Analog Ambient Light Sensor x1 
• Digital Vibration Sensor x1 
• Digital Tilt Sensor x1 
• Digital Push Button x1 
• Capacitive Touch Sensor x1 
• Digital piranha LED light module-White x1 
• Digital piranha LED light module-RED x1 
• Digital piranha LED light module-BLUE x1 
• Digital Buzzer Module x1
• Digital magnetic sensor x1
• Analog Sound Sensor x1
• Analog Rotation Sensor V2 x1
• Joystick Module (DFR0061)   x1
• Flame sensor (DFR0076)   x1
• DIGITAL IR Transmitter Module(Arduino Compatible) x1
• Light Disc with 7 SMD RGB LED x1
• IR Kit For Arduino x1
• DFRduino Ethernet Shield (Support Mega and Micro SD) x1
• Triple Axis Accelerometer MMA7361 x1
• URM37 V3.2 Ultrasonic Sensor x1
• Digital Infrared motion sensor x1
• Adjustable Infrared Sensor Switch x1
• Analog Gas Sensor(MQ5) x1 
• 9g micro servo (1.6kg) x1
• Micro DC Geared Motor with Back Shaft x2
• USB Cable A-B for Arduino x1
• 2A Motor Shield For Arduino x1
• Water Sensor x1
• Soil Moisture Sensor x1
• LSM303 Breakout Board x1

Grove Creator Kit - 40 Sensors

Grove is a set of modules consisting of 40 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

Kit Contains::

1 x Plastic Box

1 x Grove Creator Kit Manual (Color Printed Book)

1 x Grove - Tilt Switch

1 x Grove - Temperature Sensor

1 x Grove - Water Sensor

1 x Grove - Rotary Angle Sensor

1 x Grove - Sound Sensor

1 x Grove - Light Sensor v1.2

1 x Grove - Green LED

1 x Grove - Buzzer

1 x Grove - Magnetic Switch

1 x Grove - Line Finder v1.1

1 x Grove - Relay

1 x Grove - Vibration Sensor (SW-420)

1 x Grove - Temperature & Humidity Sensor (DHT11)

1 x Grove - Thumb Joystick

1 x Grove - Chainable RGB Led V2.0

1 x Grove - Multi Color Flash LED (5mm)

1 x Grove - Switch(P)

1 x Grove - Red LED

1 x Grove - Blue LED

1 x Grove - Button

1 x Grove - Infrared Emitter

1 x Grove - Red LED Button

1 x Grove - Yellow LED Button

1 x Grove - Blue LED Button

1 x Grove - Moisture Sensor

1 x Grove - Mini PIR Motion Sensor

1 x Grove - Loudness Sensor

1 x Grove - Infrared Receiver

1 x Grove - 16 x 2 LCD (White on Blue)

1 x Grove - Ultrasonic Ranger

1 x Grove - Hall Sensor

1 x Grove - Flame Sensor

1 x Grove - Touch Sensor

1 x Grove - 3-Axis Digital Accelerometer(±1.5g)

1 x Grove - Vibration Motor

1 x Grove - 4-Digit Display

1 x Grove - Speaker

1 x Grove - RTC

1 x Grove LED Bar v2.0

1 x Grove - RGB LED Stick (10 - WS2813 Mini)

Grove Creator Kit - 30 Sensors

Grove is a set of modules consisting of 30 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

Kit Contains::

1 x Plastic Box

1 x Grove Creator Kit Manual (Color Printed Book)

1 x Grove - Tilt Switch

1 x Grove - Temperature Sensor

1 x Grove - Water Sensor

1 x Grove - Rotary Angle Sensor

1 x Grove - Sound Sensor

1 x Grove - Light Sensor v1.2

1 x Grove - Green LED

1 x Grove - Buzzer

1 x Grove - Magnetic Switch

1 x Grove - Line Finder v1.1

1 x Grove - Relay

1 x Grove - Vibration Sensor (SW-420)

1 x Grove - Temperature & Humidity Sensor (DHT11)

1 x Grove - Thumb Joystick

1 x Grove - Chainable RGB Led V2.0

1 x Grove - Multi Color Flash LED (5mm)

1 x Grove - Switch(P)

1 x Grove - Red LED

1 x Grove - Blue LED

1 x Grove - Button

1 x Grove - Infrared Emitter

1 x Grove - Red LED Button

1 x Grove - Yellow LED Button

1 x Grove - Blue LED Button

1 x Grove - Moisture Sensor

1 x Grove - Mini PIR Motion Sensor

1 x Grove - Loudness Sensor

1 x Grove - Infrared Receiver

1 x Grove - 16 x 2 LCD (White on Blue)

1 x Grove - Ultrasonic Ranger

1 x Grove - Hall Sensor

Grove Creator Kit - 20 Sensors

Grove is a set of modules consisting of 20 components of the I / O such as LEDs, buzzzer, relays, etc. Modules in this kit can be easily connected to the Arduino, Raspberry Pi, and micro: bit to make various interesting project. This kit is also available in guide book that you can use to learn to create a project with modules grove that exist in this kit.

KIT Contains
1 x Plastic Box
1 x Grove Creator Kit Manual (Color Printed Book)
1 x Grove - Tilt Switch
1 x Grove - Temperature Sensor
1 x Grove - Water Sensor
1 x Grove - Rotary Angle Sensor
1 x Grove - Sound Sensor
1 x Grove - Light Sensor v1.2
1 x Grove - Green LED
1 x Grove - Buzzer
1 x Grove - Magnetic Switch
1 x Grove - Line Finder v1.1
1 x Grove - Relay
1 x Grove - Vibration Sensor (SW-420)
1 x Grove - Temperature & Humidity Sensor (DHT11)
1 x Grove - Thumb Joystick
1 x Grove - Chainable RGB Led V2.0
1 x Grove - Multi Color Flash LED (5mm)
1 x Grove - Switch(P)
1 x Grove - Red LED
1 x Grove - Blue LED
1 x Grove - Button

Internet of Things Maker Kit

The Internet of Things Maker Kit is a development kit designed to make it easy for you to create various IoT projects. This kit comes with modules, sensors, and all the devices needed to build an IoT system. It is suitable for learning media, research, and product development.

Completeness:

1x Buzzer

1x PIR Sensor

1x Temperature & humidity sensor

1x Soil Moisture & Humidity

1x ESP8266 with relay board

1x ESP8266 expansion shield

1x ESP8266 IoT V2, o

1x Micro USB Cable

Zoo Animal Kit by 4-soldering

a complete zoo-themed kit that has everything you need to assemble a simple electronic system. With this kit, children will be introduced to the basic set of electronics, soldering, the opportunity to play with LEDs, batteries, and make funny animals on this kit as if live. This kit is perfect when used to explore and know the talents and interests of children in the field of electronics.

In this kit there are already variations of animals as follows:

- Llama

- Panda

- The lion

- Rabbit

- Sheep

- Giraffes

SparkFun Inventor's Kit for Photon

The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for Photon provides you not only with the Photon RedBoard but everything you need to hook up and experiment with multiple electronic circuits! With the Photon SIK you will be able to complete circuits that will teach you how to read sensors, drive motors, and more.

The SparkFun Inventor’s Kit for Photon is the latest and greatest in Internet of Things kits. Whether you’re a software developer just getting in to hardware, an EE learning software, or somewhere in between, this kit will help you get your projects hooked up to the Internet in no time.

The kit does not require any soldering and is recommended for intermediate users.

Circuit Examples:

• Circuit 1: Hello World, Blink an LED
• Circuit 2: With a Touch of a Button
• Circuit 3: Houseplant Monitor
• Circuit 4: Color Selector
• Circuit 5: Music Time
• Circuit 6: Environment Monitor
• Circuit 7: Automatic Fish Feeder
• Circuit 8: Activity Tracker
• Circuit 9: Home Security
• Circuit 10: Pong!
• Circuit 11: OLED Apps - Weather & Clock

Kit Includes:

• SparkFun Photon RedBoard
• Arduino and Breadboard Holder
• White Solderless Breadboard
• Pocket Screwdriver Set
• Small Servo
• 9V Alkaline Battery
• 9V to Barrel Jack Adapter
• USB microB Cable - 6 Foot
• Jumper Wires
• JST Right Angle Connector - Through-Hole 3-Pin
• SparkFun Soil Moisture Sensor
• SparkFun Micro OLED Breakout (with Headers)
• SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers)
• PIR Motion Sensor (JST)
• RHT03 Humidity and Temperature Sensor
• Magnetic Door Switch Set
• Photocell
• Red, Blue, Yellow, and Green LEDs
• Red, Blue, Yellow, and Green Tactile Buttons
• 10K Trimpot
• Piezo Speaker
• 330 Ohm Resistors

Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen 2 and Edison

Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen 2 and Edison

Grove Starter Kit Plus - Intel IoT Edition for Intel Galileo Gen 2 Developer Kit is a complete hardware & software solution to help you explore the IoT space and create innovative projects. It is a starter kit for Intel Galileo Gen2, best choice for IoT developer to develop potential of Intel Galileo Gen2 and build prototype built in Galileo 2. Here are a collection of sensors, actuators and shields that we have had success using with Intel Galileo Gen 2. Here also comes the software resource, OS Boot Image(Galileo only), IDE Dev Environment (Yocto ADT). More resource please download from

https://software.intel.com/en-us/iot/downloads

Please visit Intel/iot page for more info about this product

https://software.intel.com/en-us/iot/sensors

Contents:

• Base Shield v2 × 1
• Grove – Buzzer ×1
• Grove – Button × 1
• Grove – LED × 1
• Grove - Rotary Angle × 1
• Grove - Sound Sensor × 1
• Grove - Smart Relay × 1
• Grove – Temperature × 1
• Grove - Touch Sensor × 1
• Grove - Light Sensor × 1
• Grove - Mini Servo × 1
• Grove - LCD RGB Backlight × 1
• 8GB Micro SD Card with an SD Card Adapter × 1
• 9V to Barrel Jack Adapter - 126mm × 1
• 26AWG Grove Cable × 15
• Micro USB Cable × 1
• Serial Cable × 1
• Ethernet Cable × 1

PIC-USB-STK

PIC USB STARTERKIT PROTOTYPE BOARD FOR PIC18F4550 MICROCONTROLLER WITH USB

This is a starterkit which allows you to explore all the capabilities of the PIC18F4550 and Microchip's USB firmware. The software examples include: a USB HID mouse which allows you to move the mouse cursor with the four buttons on the board, a USB Mass storage device on a SD-MMC card simple adds a USB disk to your computer, a USB to RS232 converter - all the firmware is under your control and ready to be customized and embedded in your next application. The debugging is In-Circuit through an ICSP connector, the free available ports are available on the EXTension connector.

FEATURES

• ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debuggine with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
• USB 2.0 type B connector allow board to be interfaced to PC host.
• RS232 connector
• SD-MMC connector
• Audio In, Audio Out connectors
• Status LEDs
• Trimmer potentiometer
• Four buttons
• PIC18F4550-I/P on DIL40 socket
• Quartz crystal 20Mhz
• Reset button
• Power plug-in jack with diode bridge can be powered with AC or DC power supply
• 5V voltage regulator
• Extension slot for the not connected ports
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions 104x76 mm (4,1x3")

MEMS Sensors Evaluation Kit with Freescale FRDM-KL25Z Freedom Platform

The Xtrinsic MEMS sensors board features three types of Xtrinsic sensors from Freescale, including MPL3115A2 , MAG3110 and MMA8491Q . Included in the kit are the software drivers and code that enables users to easily evaluate and demonstrate the performance of the sensors to measure altitude, pressure, as well as detection of magnetic fields and physical position.

MPL3115A2 Absolute Xtrinsic Smart Pressure Sensor

The MPL3115A2 provides highly precise pressure and altitude data with variable sampling rate capability. It has very low-power consumption, smart features and requires zero data processing for mobile devices, medical and security applications. The Xtrinsic MPL3115A2 pressure sensor smart features include digital output, two interrupts for auto-wake, minimum/maximum threshold detection and autonomous data acquisition. MCU usage can be limited since the MPL3115A2 pressure sensor can process sensor data locally, reducing communications required with the host processor.

MAG3110 Xtrinsic High Accuracy, 3D Magnetometer

The MAG3110 is a small, low-power digital 3-D magnetic sensor with a wide dynamic range to allow operation in PCBs with high extraneous magnetic fields. The MAG3110 magnetometer measures the three components of the local magnetic field which will be the sum of the geomagnetic field and the magnetic field created by components on the circuit board. Used in conjunction with a 3-axis accelerometer, orientation-independent accurate compass heading information can be achieved. The MAG3110 features a standard I²C serial interface and is capable of measuring local magnetic fields up to 10 Gauss with output data rates (ODR) up to 80 Hz.

MMA8491Q Xtrinsic 3-Axis, Digital Accelerometer

The Xtrinsic MMA8491Q 3-axis accelerometer is an ultra-low-power tilt sensor that enables smart meters, home appliances, asset tracking applications, gaming and remote controls through auto-on/auto-sleep energy-efficient operation housed in a specialized industrial package. The Xtrinsic MMA8491Q accelerometer is simple, yet robust with reduced system and implementation cost for reduced development time. Its unique single sample and hold measurement method allows for ease of use.

The MEMS sensors board is connected to FRDM-KL25Z Freedom board via J2 and J9 I/O header on FRDM-KL25Z board. The FRDM-KL25Z features a KL25Z128VLK - a KL2 family device boasting a max operating frequency of 48MHz, 128KB of flash, a full-speed USB controller, and loads of analog and digital peripherals. The Xtrinsic MEMS sensors evaluation kit also provides the software for easily evaluating and interacting with MPL3115A2 , MAG3110 and MMA8491Q Xtrinsic sensors.

Key Applications: Compass, Mobile Phones/Tablet Computers, Remote Control/Wireless Mouse, Game Consoles, Navigation Devices, Medical Devices

ISD-DMK_9160 Evaluation Kit , Debugging and Demo Kit for ISD9160

Training kit for IC ISD9160 voice recorder. This IC chip is equipped with ARM Cortex-M0 to assist in the manufacture of complex systems, such as speech recognition. At this kit sales package included modules for ISD9160 and some I / O module support, such as touch screens and switches.

specifications:

- Based ISD9160 IC (integrated with the ARM Cortex-M0).

- Can be applied for the purposes of speech recognition.

- Significant internal microcontroller can be programmed using ISP or ICP from Nuvoton.

- It has an internal ADC

- Have an interface I2C, SPI, UART

- Has Timer / Clock

- Have a PWM output

- Sales Package: 1x-DEMO9160 ISD, ISD-9160-1x Touch, 1x ISD-9160-KB (switch), 1x Speaker, 1x ISD-and Nu-Link.

AVR AT90USB162 Neo Low Cost Nano System

Neo Low Cost Nano System With AVR AT90USB162 the latest generation of the product Low Cost Nano System. Neo Low Cost Nano System does not use DIP IC packaging ATTiny2313 like before, but using AT90USB162 with a 32-pin TQFP package. With IC-based AT90USB162 make this module have a USB interface that can be used for data communication to PC or charging program code.

This module no longer require additional longer external programmer for loading program code into  AT90USB162. Only by using FLIP software on the PC and a micro USB cable, then the program on your PC can be directly entered (downloaded) into the microcontroller. The process of downloading the program code through the USB port can only be done during the bootloader program by default is in the AT90USB162.. If the missing bootloader program then can ask for the code to the bootloader program ATMEL directly and then loaded into the AT90USB162 through ISP PORT by using external device programmer.

The Neo Low Cost Nano System can work in the voltage level of 3.3 VDC or 5VDC (selected jumper). With the addition of 3.3 VDC voltage level features then this module can easily communicate with the sensor module or IC that has a voltage of 3.3 VDC level without the need to use shifter level or level converter.

Online Order

Specifications:

• AT90USB162 based.
• 16KB flash memory (4KB for the bootloader), 512 Byte EEPROM, 512 Byte SRAM.
• Has 21 channels of I / O.
• Has a mini USB port for charging or data communication lines of program code.
• Using external 4MHz crystal.
• Has a SPI interface, UART TTL and USB.
• Available internal voltage regulator 3.3 VDC and 5VDC 800mA.
• Requires a 3.3 VDC power supply input - 5.5 VDC (without going through the internal regulator) or 6.5 VDC - 12VDC (via internal regulator)
• Dimension: 6.5 cm  x 4.2 cm  x 2 cm 

ONLINE ORDER  https://tokopedia.com/rosesana/avr-at90usb162-neo-low-cost-nano-system

AVR ATmega32U4 Neo Low Cost Micro System

Neo Low Cost Micro System AVR ATmega32U4 is the latest generation , does not use DIP IC packaging ATMega8535 like the old Low Cost Micro System but using ATmega32U4 with a 44-pin TQFP package. With IC-based ATmega32U4 make this module have a USB interface that can be used for data communication to PC or charging program code.

This module no longer require additional longer external programmer for loading program code into mikrokontorler ATmega32U4. Only by using FLIP software on the PC and a micro USB cable, then the program on your PC can be directly entered (downloaded) into the microcontroller. The process of downloading the program code through the USB port can only be done during the bootloader program by default is in ATmega32U4 . If missing bootloader program then can ask for the code to the bootloader program ATMEL directly and then filled into ATmega32U4 through the ISP PORT by using external device programmer.

The AVR-ATmega32U4 Low Cost Neo Micros System can work in the voltage level 3.3 VDC or 5VDC ( selected jumper). With the addition of 3.3 VDC voltage level features then this module can easily communicate with the sensor module or IC that has a voltage of 3.3 VDC level without the need to use shifter level or level converter.

Specifications:

• Based ATmega32U4.
• 32KB flash memory (4KB for the bootloader), 1K Byte EEPROM, 2.5 K Byte SRAM.
• It has 26 channels of I / O.
• Has a mini USB port for charging or data communication lines of program code.
• Using external 4MHz crystal.
• Has a SPI interface, I2C, UART TTL and USB.
• Available internal voltage regulator 3.3 VDC and 5VDC 800mA.
• Requires a 3.3 VDC power supply input - 5.5 VDC (without going through the internal regulator) or 6.5 VDC - 12VDC (via internal regulator)
• Dimension: 6.6 cm  x 5.3 cm  x 2 cm 

Neo GSM Starter Kit

Neo GSM Starter Kit is an application development module GSM / GPRS SIM900 based. Neo GSM Starter Kit can be used as a data exchange advice text (Short Message Service / SMS), and exchange data via GPRS. Neo GSM Starter Kit is equipped with USB interface (Virtual COM port) and UART TTL serial, so Neo GSM Starter Kit can be used directly with a PC or with a variety of microcontroller and microprocessor systems. Real-world application includes vehicle tracking system (motor vehicle tracking system by sending data from a GPS module as Neo GPS or GPS Starter Kit. Starter Kit via mobile communications), sales of mobile phones and electronic pulses others.

Specifications:

• Based SIM900, Quad-band GSM module: 850MHz, EGSM 900MHz, DCS 1800MHz and PCS1900MHz.
• Support SIM card with voltage 1.8 V and 3V.
• It supports GPRS multi-slot class 10, SIM Application Toolkit features, fax features, and TCP / IP.
• There is a button to turn on / off and a button to reset the GSM module.
• There are 2 LED indicator Status (Status GSM and GSM networks).
• Available sockets + 1 piece of type CR2032 3V battery for Real-Time Clock (RTC).
• There are two interface options:
• UART TTL
• USB (virtual COM port)
• Can be connected and controlled directly by the computer.
• Requires power supply input voltage is 9-12 VDC (current + / - 2A).
• Compatible with the DT-51 Low Cost Series and DT-AVR Low Cost Series, as well as supporting the system microcontroller / microprocessor other.
• Also provided examples of AN (Application Note) use GSM Neo Starter Kit with a microcontroller and PC along with source code programs.
• Dimensions: 9.5 cm x 7.6 cm x 1.9 cm

Equipment:

• 1 piece Neo GSM Starter Kit.
• 1 piece GSM Antenna 900-1800 MHz.
• 1 piece Mini USB cable to USB type A.
• 1 piece of 3V CR2032 battery.
• 1 piece DVD that contains a collection of manuals, schematics, testing procedures, support programs.

Neo GPS Starter Kit

Neo GPS Starter Kit is a development tool based SIM18 GPS Receiver. SIM18 has the ability to capture up to 48 channel GPS satellite channel, which means it can be faster and more stable in the GPS position lock. Interface options on Neo GPS Starter Kit is also very complete, which consists of a USB (Virtual COM Port), I ² C, and UART TTL serial. Therefore Neo GPS Starter Kit can be used directly with a PC and a wide range of microcontrollers.

Neo GSM Starter Kit has a dimension that is quite small and compact so more freely used in various kinds of GPS applications. Neo GPS Starter Kit can be used for localization of GPS-based applications such as GPS navigators, GPS tracking system (object tracking system / vehicle to transmit GPS data via a module GSM / GPRS as Neo GSM or GSM Starter Kit Starter Kit via mobile communications or the internet) , GPS positioning, and so forth.

Specifications:

• Based SIM18, Receiver 48 channel GPS module with SiRF OSP protocol and data output NMEA.
• Supports active antenna voltage -5.5 V to 5.5 V.
• There is a choice of antenna source voltage: 1.8 V internal or external regulator.
• There is a choice of interfaces:
•                   USB (Virtual COM port).
•                   UART TTL.
•                    I ² C.
• Input voltage 5 VDC power supply is equipped with a voltage of 1.8 VDC.
• Compatible with the DT-51 Low Cost Series and DT-AVR Low Cost Series, as well as supporting the system microcontroller / microprocessor other.
• Also provided examples of AN (Application Note) Neo GPS-based DT-AVR Low Cost Micro System C language (CodeVisionAVR ©) and a PC-based software and its source code Delphi program.
• Dimensions: 6.9 cm x 6.2 cm x 1 cm

Equipment:

• 1 piece Neo GPS Starter Kit.
• 1 piece active GPS antenna.
• 1 piece Mini USB cable to USB type A.
• 1 piece DVD that contains a collection of manuals, schematics, testing procedures, support programs.

GPS Starter Kit V2

GPS Starter Kit V2 is a means of developing OEM GPS Receiver module based LR9540 (LR9548), equipped with LCD 16 characters x 2 lines as a medium of display. This module is suitable for developing applications related to GPS, such as: GPS navigator, GPS tracking, and so on. 

Currently GPS Starter Kit has experienced renewal in the use of the GPS module. In the previous version of GPS Starter Kit using EG-T10 GPS module, GPS Starter Kit now comes back with using the GPS module LR9540 (LR9548) 

	EG-T10	LR9540 (9548)
Chipset	SiRFstarII	SiRFstarIII
Channel	12	20
Reacquisition	0,1 sec (avg)	0,1 sec (avg)
Hot start	4 sec (avg)	1 sec (avg)
Warm start	38 sec (avg)	35 sec (avg)
Cold start	45 sec (avg)	42 sec (avg)

Specifications: 

• Based LR9540 (LR9548), module 20-channel OEM GPS Receiver with UART interface / TTL and has a SiRF binary output protocol and NMEA-0183. 
• OEM GPS Receiver module supports other work on voltage of 5 VDC and has a corresponding pinout. 
• Supports active antenna voltage 5V and 3.3 V for the voltage regulator is equipped with a 3.3 VDC. 
• Available manual reset button and a socket for a 3 V battery backup sized 'CR2032'. 
• Equipped with LCD 16 characters x 2 lines with a series of 4-bit LCD and LCD contrast level regulator. 
• Can be connected to a computer's USB port using the PC-Link USBer. 
• Requires a 5 VDC power supply input. 
• Compatible with the DT-51 ™ Low Cost Series or DT-AVR Low Cost Series, as well as supporting the system microcontroller / microprocessor other. 
• Dimensions: 11.65 cm x 10.45 cm x 2.8 cm 

Equipment: 

• 1 piece GPS Starter Kit Board. 
• 1 sheet of Quick Start. 
• 1 piece CD contains sample applications, datasheet LR9540 (LR9548), etc..

Arduino Starter Kit

The Arduino Starter Kit!

This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.

The projects in the kit are:

01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit

02 SPACESHIP INTERFACE design to control panel for your startship

03 LOVE-O-METER measure how hot-blooded you are

04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input

05 MOOD CUE clue people in to how you're doing

06 LIGHT THEREMIN create a musical instrument you play by waving your hands

07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard

08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much

09 MOTORIZED PINWHEEL a color wheel that will have your head spinning

10 ZOETROPE create a mechanical animation you can play forward or reverse

11 CRYSTAL BALL a mystical tour to answer all your tough question

12 KNOCK LOCK tap out the secret code to open the door

13 TOUCHY-FEEL LAMP a lamp that responds to your touch

14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino

15 HACKING BUTTONS create a master control for all your devices!

Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent. 

Then build it, hack it and share it. Because Arduino is you!

What in the kit is listed below:

1	Arduino Projects Book (170 pages)
1	Arduino UNO board rev.3
1	USB cable
1	Breadboard
1	Easy-to-assemble wooden base
1	9v battery snap
70	Solid core jumper wires
2	Stranded jumper wires
6	Photoresistor [VT90N2 LDR]
3	Potentiometer 10kilohm
10	Pushbuttons
1	Temperature sensor [TMP36]
1	Tilt sensor
1	alphanumeric LCD (16x2 characters)
1	LED (bright white)
1	LED (RGB)
8	LEDs (red)
8	LEDs (green)
8	LEDs (yellow)
3	LEDs (blue)
1	Small DC motor 6/9V
1	Small servo motor
1	Piezo capsule [PKM17EPP-4001-B0]
1	H-bridge motor driver [L293D]
2	Optocouplers [4N35]
5	Transistor [BC547]
2	Mosfet transistors [IRF520]
5	Capacitors 100nF
3	Capacitors 100uF
5	Capacitor 100pF
5	Diodes [1N4007]
3	Transparent gels (red, green, blue)
1	Male pins strip (40x1)
20	Resistors 220 ohm
5	Resistors 560 ohm
5	Resistors 1 kilohm
5	Resistors 4.7 kilohm
10	Resistors 10 kilohm
5	Resistors 1 megohm
5	Resistors 10 megohm

Netduino Go Starter Kits

No soldering required. This plug-and-play kit offers 4 times the speed (168MHz), 6 times the code space (384KB) and twice the RAM (100KB+) of the Netduino Plus. The peripherals are virtualized and contain a microchip that works with the mainboard. 

All you have to do is pick what you need and plug it in. The kit is designed to get you up an running quickly. It includes the Netduino Go mainboard, one button module, shield base (beta, see below) module, potentiometer module, RGB LED module, two 5cm Go cables, two 10cm Go Cables, and a 3 foot micro USB cable. It's like freedom, in the form of electrons. 

All Netduino Go hardware is production hardware. We're shipping the production Shield Base hardware with early beta firmware so that we can get wide feedback on this new virtualization technology. And to say thank you for beta testing the Shield Base, we've temporarily upgraded its 128KB-flash MCU to a full-blown 512KB-flash 120MHz Cortex-M3 microcontroller. 

You can connect it to power and a USB-TTL serial cable and use it as a traditional Netduino if you'd like as well — while enjoying its 3 serial ports and other new enhancements. Both the Netduino Go and the Shield Base run production versions of .NET MF 4.2 QFE1 (RTM). 

 Features Includes: 

• Processor and Memory STMicro 32-bit 
• Microcontroller Speed: 168MHz, Cortes-M4 
• Code Storage: 384 KB RAM: 100+ KB STM32F405RG 
• STM32F405RG 
• LEDs Power 
• LED: White 
• Socket LEDs: 8 blue Buttons Activates bootloader (hold on boot) Can be used as GPIO input I/O Features All 8 sockets are compatible with Go Bus Modules Up to 2 sockets are compatible with Gadgeteer S-U-X modules. 
•  Power Input: USB powered 
• Output: 5 VDC and 3.3 VDC Switched Max Current: 25 mA per pin Digital I/O are 3.3V (5V tolerant) 
• Environmental Operating Temperature: 0 - 70 °C (32 - 158 °F) 
• RoHS Compliant 
• Lead free

Propeller Starter Kit + Official Guide

This kit pairs the comprehensive Propeller Manual with the highly capable Propeller Demo Board and The Official Guide for an attractive savings. By following the steps in the Spin Tutorial that is included in the free Propeller Tool Software’s Help file, you will get a step-by-step introduction to programming on the Propeller Demo Board. This board is pre-wired to connectors for interfacing with devices such as a mouse, keyboard, TB or VGA monitor, and speakers, and is also configured for immediate use by many objects from the Propeller Object Exchange.

This starter kit is sold with version 1.1 of the (#122-32000) Propeller Manual. USB A to Mini B cable included. Power supply sold separately.

The Propeller Manual v1.1 begins with an introduction to the Propeller chip’s architecture and Spin programming language, debugging techniques, and sensor interfacing. Then, the remainder of the book introduces eight diverse and powerful applications, ending with a speech synthesis demonstration written by the Propeller chip’s inventor, Chip Gracey.

Numerous illustrations and example programs accompany each application. Example source code and other related resources are available for free download from ftp://ftp.propeller-chip.com/PCMProp!

Kit Contents:

• Propeller Demo Board
• Propeller Manual v1.1
• Type A to mini B USB cable

Key Specifications:

• Power requirements: 6 - 9 VDC
• Communication: N/A
• Dimensions: 3 x 3 in (76 x 76 mm)
• Operating temp range: +32 F to +183 F (0 C to +70 C)

WIZ-RF Start Kit

The WIZ-RF Start Kit is a kit for testing and understanding WIZnet’s 2.4GHz RF communication  module product line: WIZ-RF10, WIZ-RF20, WIZ-RF30, WIZ-RF40. 

WIZnet’s WIZ-RF   series  is  a   low-powered   RF   communication   solution. This  solution   can   use 

various   sensors   or   controllers   to   enable   data   communication   through   wireless   network.   

The WIZ-RF series can be used in the following applications. 

     Computer Peripherals 

           Mouse, Keyboard 

           Remote Control 

           Gaming 

     Advanced Remote Controls 

           Audio/Video 

           Entertainment Centers 

           Home appliances 

     Goods Tracking and Monitoring 

           Active RFID 

           Sensor network 

     Security system 

           Payment 

           Alarm 

           Access Control 

     Health,, wellness and Sports 

           Watches 

           Mini computers 

           Sensors 

     Remote Control Toys 

WIZ-RF Start Kit is composed of the following modules, base boards, and accessories. 

WIZ-RF Modules 

                                      WIZ-RF10 

                                      RF-to-Ethernet Module 

                                      Gateway   Module for   sending the   RF  received   data through 

                                      Ethernet, or sending the Ethernet received data through RF. 

                                      Size: 30mm x 40mm, 2pcs 

                                      WIZ-RF20 

                                      RF Transceiver Module 

                                      Wireless       communication       module       for    using     RF 

                                      communication by using the SPI interface from MCU. 

                                      Size: 30mm x 25mm, 2pcs 

                                      WIZ-RF30 

                                      RF inside MCU Module 

                                      MCU module with a built-in RF Transceiver and STM32 MCU 

                                      for users to do easy programming. 

                                      Size: 30mm x 40mm, 2pcs 

Software 

                                      WIZ-RF10 Configuration Tool 

                                      Software   for   setting   WIZ-RF10  Gateway  module’s  function 

                                      through the network. 

                                      You can check the latest version on WIZnet’s homepage. 

                                      Device Terminal 

                                      Software   for   testing   TCP,   UDP   communication   and   Serial 

                                      Terminal function. 

                                      You can check the latest version on WIZnet’s homepage. 

WIZ-RF Test Base Board 

                                      WIZ-RF10 BASE BOARD 

                                      This   base   board   can   test   the   WIZ-RF10   module;   RS-232, 

                                       RJ-45, and a USB connector are mounted. 

                                       Size: 70mm x 60mm, 2pcs 

                                      WIZ-RF-BASE 

                                      This   base   board   can   test   the   WIZ-RF20,   WIZ-RF30,   and 

                                      WIZ-RF40      module;    RS-232,  USB   connector,    LEDs,   and 

                                       switches are mounted. 

                                       Size: 140mm x 93mm, 2pcs 

                                       PM-AT88 

                                       MCU     module   for  testing   WIZ-RF20;  Atmel’s  ATMEGA88  

                                       MCU and 8MHz clock are mounted. 

                                       Size: 30mm x 35mm, 2pcs 

Accessories 

                                      Ethernet Cable 

                                      LAN cable for testing WIZ-RF10. 

                                      2pcs 

                                      Serial Cable 

                                      Serial   Cable   for  connecting   to  serial  communication    or 

                                      debugging. 

                                      2pcs 

                                      USB Cable 

                                      USB Cable for power. 

                                     4pcs