KYL-300M radio transceiver modem

KYL-300M middle RF output power radio transceiver modem (433MHZ, RS232, 1200bps) RF transceiver modem device designed for low-cost, high-performance radio communications applications. This device is protected cover / case made from aluminum sturdy and designed with a form that can facilitate the user in the installation process to a device. This transceiver modem works at 433 MHz frequency, supports bitrate up to 1200 bps, and supports communication through the RS-232 interface.

The following is an example of application from KYL-300M:

- Wireless order-dish system

- Wireless POS, PDAs and smart terminals

- Automatic Meter Reading (AMR)

- Wireless alarm and security system

- Building automation system

- Wireless data transmission

- Transport system and smart traffic

- Wireless parking system

- wirelessly transmitting and receiving sensor data

- And many more

• 5 VDC power supply
• Data rate 1200 bps
• The working frequency is 433 Mhz
• RS-232 interface
• GFSK / FSK Modulation
• Jangkuan 7 KM (BER10-5 @ 1200bps), 5 KM (BER10-5 @ 9600bps)

BlueSMiRF HID

The BlueSMiRF HID is essentially the same board as the BlueSMiRF Silver but the populated RN-42 comes loaded with the HID firmware. HID, or “Human Interface Device,” is the communication protocol used for computer peripherals such as keyboards, mice and joysticks. This makes the RN-42-HID a simple and powerful tool for creating wireless peripheral devices which can be universally recognized and used without the installation of special drivers. The manual included in the documentation below goes into more detail about the Bluetooth HID profile.

The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit if you need to attach this to a computer.

Note: This is a single unit only. We recommend the purchase a USB dongle to interface to a computer if you do not already have access to a computer with Bluetooth connectivity.

Specifications:

• FCC Approved Class 2 Bluetooth****Radio Modem
• Extremely small radio - 0.15x0.6x1.9"
• Very robust link both in integrity and transmission distance (18m)
• Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee
• Encrypted connection
• Frequency: 2.402~2.480 GHz
• Operating Voltage: 3.3V-6V
• Operating Temperature: -40 ~ +70C
• Built-in antenna
• Dimensions: 45x16.6x3.9mm

Wavecom GSM M1306B-Q2403A

GSM modem with a case made of aluminum dural that besides suitable to fit gatewat SMS is also used as a telemetry unit various electronics projects. Antarmua have RS232 serial communication protocol with the AT command. In the package already included adapter, serial cable and its antenna.

Features:

- Case aluminuym

- Compatible Internet access (GPRS)

- Dual-band 900 / 1800MHz

- 3V SIM card slot

- Serial RS232 Interface

- Mendukug Function Dual Tone Multi Frequency (DTMF)

- Supports phone calls, data, fax, e-mail, SMS, MMS

- Maximum transmitting speed 115KB / s

- Support AT command to the make remote control (GSM07.07 and 07:05)

- GPRS Class 2

- Antenna with high sensitivity

- Always on-line

- Conform with ETSI GSM Phase2 + standard

- Output Power: Class 4: 2W @ 900MHz, 1W @ 1800MHz

- Working voltage: 5V-24V DC (not applicable for USB interface)

- Workflow: 1-2a

- Working temperature -20 to +55 Celsius Degree

- Storage temperature: -25 to +70 Celsius Degree

- Size: 73 * 54 * 25mm

RICi-E1 Fast Ethernet over E1/T1 Intelligent Converters

RICi-E1 Fast Ethernet over E1/T1 Intelligent Converters 

• Wire-speed packet forwarding Connect Fast Ethernet
• 4 levels of QoS, based on four VLAN priority queues in accordance with 802.1p and LANs over E1 or T1 IP Precedence
• Inband and out-of-band management access via ASCII terminal, Web browser, circuits Telnet, or SNMP • Plug-and-play using DHCP client
• VLAN stacking and tagging, keeping Ethernet user traffic completely separate from management data, while maintaining user VLAN settings intact

RICi-E1 and RICi-T1 are intelligent converters connecting Fast Ethernet LANs over full or fractional E1 or T1 circuits. They enable service providers and ISPs to supply transparent Ethernet services, without interfering with user traffic.

RICi-E1 and RICi-T1 comply with RAD’s unique set of EtherAccess™ features. This feature set provides services and carrier backhaul applications over low and high- speed SDH/SONET and PDH circuits, from fractional and full E1/T1 or E3/T3 over STM-1/STM-4 to Gigabit Ethernet.

RICi-E1 and RICi-T1 are equipped with one E1/T1 port and one 10/100BaseTx port. Packets are forwarded from the Ethernet network to the TDM network at wire-speed, fully utilizing the expensive TDM circuit bandwidth.

The VLAN Priority bits (802.1p) and IP Precedence priority schemes enable users to define four different QoS levels, according to the application requirements.


RICi-E1, RICi-T1 
Fast Ethernet over E1/T1 Intelligent Converters

The Fast Ethernet bridge handles 1800-byte frames, supporting VLAN  applications and other protocols requiring large frame sizes. In filter mode, the  bridge learns MAC addresses and filters  local traffic, and in transparent mode it forwards any received packet.

VLAN stacking is used to tag direct user and management traffic to different VLANs, thus preserving the user LAN settings, fully separating user traffic from management data.

The DHCP client automatically obtains the IP address, the IP mask and the default gateway, minimizing installation time.

The units feature fault propagation. When a TDM link failure is detected, RICi-E1 and RICi-T1 closes the user port.

SPECIFICATIONS :

• E1 INTERFACE  Number of Ports 1 
• Compliance G.703 G.704 
• Data Rate 2.048 Mbps 
• Line Code HDB3, AMI
• Framing  Unframed - Framed: G.732N
• Max Frame Size 1800 bytes 
• Line Impedance 120Ω, balanced -75Ω, unbalanced 
• Providing Transparent LAN Services over Leased Lines
• System Clock Internal or loopback 
• Diagnostics Remote loopback 
• Connector RJ-45

ASUS Wireless RT-N13U

ASUS Wireless RT-N13U N Wireless Router with All-in-One Printer Server ·

• Auto detect the type of your internet connection and free setup guide. ·
• Download Master: to download 24 hours even when the PC is off ·
• USB port for FTP / Printer sharing All-in-One. ·
• Mode Universal Repeater: extend your wireless signal range in only 3 steps. 

Printer sharing EZ All-in-One New ASUS wireless router distinguishes itself with the function "auto switching". This feature not only allows multiple users to use the printer wirelessly without a PC or server turned on 24 hours a day, but also solve the problem of "disconnecting" and "re-connecting" when switching users. When different users will use the printer, this router will automatically switch which allows different users to use the printer simultaneously. After connecting a USB printer on a wireless router and run the program ASUS ASUS Network Printer Setup, then each user can enjoy the scan and print with ease.

EZ Switch - Switch Mode Operation only with ONE TOUCH ASUS EZ Switch latest design provides three operating modes that can be easily changed by users with only ONE TOUCH.

Specifications

• Standards IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.11d, IEEE802.3, IEEE802.3u, IEEE802.1X, WPA, WMM, IPv4
• WAN Ports 1 x RJ45 for 10/100 BaseT
• Support Ethernet and 802.3 with max. bit rate 10/100 Mbps and auto cross-over function(MDI-X)
• LAN Ports 4 x RJ45 for 10/100 BaseT
• Support Ethernet and 802.3 with max. bit rate 10/100 Mbps and auto cross-over function(MDI-X)
• USB port 1 x USB 2.0
• Reset Button Push for above 5 seconds to restore factory settings
• EZ Setup button Yes (WPS)
• Management
• Internet connection type: Automatic IP ,Static IP, PPPoE(MPPE supported), PPTP, L2TP
• Dual Link support
• WAN Bridge support
• Multicast Proxy support
• Multicast Rate Setting support
• Firewall
• NAT and SPI (Stateful Packet Inspection) Firewall: enable/disable WAN ping , allow access from WAN , log of accepted and dropped

Filtering:

• Single Port and Port Range
• URL based
• MAC Address
• Operating Frequency 2.4Ghz
• Modulation 802.11n:
• BPSK / QPSK / 16QAM / 64QAM

802.11g:
ODFM @ 6, 9, 12, 18, 24, 36, 48, 54Mbps

802.11b:
DBPSK @ 1Mbps
DQPSK @ 2Mbps
CCK @ 5.5 / 11Mbps

• Data Rate 802.11n Draft 2.0: up to 300Mbps
• 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
• 802.11b: 1, 2, 5.5, 11Mbps
• Operation Channel 11 for N.America, 14 Japan, 13 Europe(ETSI)
• Antenna 2 x internal antenna
• Antenna Gain in 3 dBi
• Range outdoor (LOS, Light-Of-Sight) 200 m at 802.11n* *The range may vary by different environment
• Output Power 15.5 ~16.5dBm(n mode)
• 15.5 ~16.5dBm(g mode)
• Receive Sensitivity(10MHz BW) -74~ -75dBm @54Mbps
• -89~ -92dBm @11Mbps
• -91~ -95dBm @ 1Mbps
• Encryption 64/128-bit WEP
• WPA-PSK, WPA2-PSK,
• WPA-Enterprise, WPA2-Enterprise, Radius with 802.1x
• Authentication MAC address, 802.1x
• Power Adapter AC Input: 100V~240V(50~60HZ);
• DC Output: 12V with max. 1 A current

D-Link DSL-2640B Wireless G ADSL2+ Modem Router

D-Link DSL-2640B Wireless G ADSL2+ Modem Router

Built-in 802.11g WLAN interface - up to 54Mbps speed - 4-Port 10/100 Switch - Built-in ISP Database - Advanced Parental Control - Firewall protection, Quality of Service (QoS)

ADSL2+ 4-port Modem Router

The D-Link DSL-2542B ADSL2+ 4-port Modem Router is an affordable, high-speed remote router for the home and small office. With an integrated ADSL modem, the router connects directly to your phone socket to allow several people to surf, chat or check e-mails on-line simultaneously.

High-Speed ADSL connection

The DSL-2542B supports the latest ADSL2/ADSL2+ standards, providing speeds of up to 24 Mbps downstream and 1 Mbps upstream (ADSL2+), or 12 Mbps downstream and 1 Mbps upstream (ADSL2). It is compatible with all major European service providers.

The heart of your network

The router includes four Ethernet ports, ready for you to connect network devices such as print servers, network cameras, digital media players and computers running any operating system.

Internet Security

The router features a comprehensive firewall that repels Denial of Service (DoS) attacks and prevents hackers from entering your network from the Internet. Strong parental controls allow you to block certain web site addresses, preventing users from viewing inappropriate content. This can be adjusted according to the time of the day (scheduling).

The router also supports multiple VPN pass-through to let you securely access office files and e-mail from home.

No delays with Internet phone calls and gaming

The router is able to identify those data packets that are sensitive to delay, such as in voice or games.

This support for Quality of Service (QoS) is automatic, but can also be configured for you to prioritise your own chosen applications.

Easy to install

The router includes D-Link's Click'n Connect software (DCC). This wizard allows anybody without any prior technical knowledge to install the router and connect to the Internet within minutes. Just by running the product CD, you are taken through establishing physical connections (power and cabling), selecting your ISP from the drop-down menu and finally connecting to the Internet.

D-link DSL-526B

DSL-526B

ADSL2+ Ethernet/USB Combo Router.

Affordable High-Speed Connection for Home & Small Office

The DSL-526B ADSL2+ combo modem router is an affordable high-performance ADSL device for home and the small office. With integrated ADSL2/2+ supporting up to 24Mbps download speed, firewall protection and Quality of Service (QoS), this router provides all the essentials that a home or small office needs to establish a secure and high-speed remote link to the outside world.

Firewall Protection & QoS

Security features prevents unauthorized access to the home and office network from Internet intruders. The router provides firewall security using Stateful Packet Inspection (SPI) and Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses. For Quality of Service (QoS), the router supports multiple priority queues to enable a group of home or office users to experience the benefit of smooth network connection of inbound and outbound data without concern of traffic congestion. This QoS support allows users to enjoy high ADSL transmission for applications such as VoIP, streaming multimedia and on-line games over the Internet.

Device interfaces:

• RJ-11 ADSL port
• RJ-45 LAN 10/100 with auto MDI/MDIx
• USB 1.1
• auto reset button

RAD HTU-2 HDSL , LAN to LAN interconnection without router

RAD HTU-2 HDSL , LAN to LAN interconnection without router

Wire-speed LAN-to-LAN connection

In campus and corporate environments, there is often a need to connect LANs that are located in separate buildings within a campus or in various locations across town, at distances that exceed the standard Ethernet limitation. The network is typically spread out over a number of locations at various distances from the main network. Since most campus facilities have copper infrastructures, these wires can be used for cost-effective wire-speed LAN interconnection of campus and corporate networks.

Modems with built-in routers and bridges

To relieve the burden of operation from the IT department, it is crucial for organizations to deploy simple, remotely configurable LAN extension devices. RAD modems that feature ChipBridge™ or ChipRouter®, innovative chips designed and developed by RAD, provide transparent Ethernet connectivity over any type of WAN infrastructure. The LRS-24™ modem shelf supports a wide variety of xDSL and fiber optic modems with different rates and ranges.   Central SNMP management enables remote control of all devices. The modems are plug-and- play, requiring almost no configuration.

Varying ranges and multiple data rates 

In the typical corporate configuration shown below, a municipal government wants all institutions, located at varying distances from City Hall, to share the same network. RAD's HTU-2™ HDSL modem and ASMi-50™ MSDSL modem, with built-in bridges or routers, achieve cost-effective LAN extension over different ranges and data rates up to 2.048 Mbps.

Typical applications:

• LAN-to-LAN connection
• High speed data transfer HDSL
• High speed Internet connection

Typical users:

• Carriers' outsourcing departments
• the Corporate with multiple remote sites
• Military and government networks

Features:

• Built-in ChipBridge and ChipRouter
• Different xDSL modems in the same platform
• Supports long distances
• Combination of fiber and copper in the same platform
• Automatic learning and aging of MAC addresses
• Plug-and-play Ethernet interface
• HTU-2 in 4 wires,n x 64 kbps up to 2,048 kbps can reach Up to 4.8 km (3 miles) or 9.6 km

Benefits :

• Cost-effective solution – no need for external routers Wire-speed connections
• Most cost-effective support of different ranges and rates
• Increases customer coverage at low cost
• Significant space savings and lower maintenance expenses
• One management system for easy end-to-end management
• Adapts to remote site topology
• Simple installation and configuration

 HTU-2 trademarks of RAD Data Communications Ltd.© 2009 RAD Data Communications. All rights reserved.

RAD ASMi52, 2/4 wire SHDSL modems

RAD ASMi52, 2/4 wire SHDSL modems

The ASMi52 modem use TCPAM 16 line coding SHDSL technology to extend the range of digital interfaces . These device offer longer and variable data rate up to 2.3Mbps over 2 wire and 4.6Mbps over 4 wire.

Features:

• Data rates up to 2.3Mbps over 2 wire or 4.6Mbps over 4 wire
• Extended range up to 10KM (6.2 miles)
• Reliable performance over poor quality or noisy lines
• Work opposite LRS-24, DXC, Megaplex, and third party equipment (work as Converter)
• user port option for ASMi52: E1, T1, V35, X.21, RS-530 and 10BaseT with bridge/router

 

RIC-E1, RIC-T1 E1, T1 Interface Converters

RIC-E1, RIC-T1 E1, T1 Interface Converters by RAD.

FEATURES

• Convert from V.35, X.21,V.36, RS-530 to E1 or T1 interfaces
• Connect 10BaseT and 100BaseT LANs and VLANs over E1 or T1 services
• Integrated IP router for connecting IP domains over E1/T1 services
• 10/100BaseT bridge supporting IEEE 802.3x flow control and back pressure
• Diagnostic loopback activation in compliance with ITU V.54 standard
• Plug and play

DESCRIPTION

• RIC-E1 and RIC-T1 interface converters enable communication between devices with E1/T1 interfaces and equipment with V.35, X.21, V.36, RS-530 interfaces.
• When equipped with IR-ETH/QN interface module, RIC-E1 and RIC-T1 transparently connect remote LANs and VLANs over unframed E1/T1 links utilizing the full E1/T1 bandwidth. The IR-ETH/QN interface modules support autonegotiation, allowing connection without additional configuration.
• RIC-E1 and RIC-T1 equipped with the IR-IP interface module operate as IP gateways, forwarding IP packets destined to the IP network. This prevents broadcast to the WAN and enables the LAN users to register for an IP multicast service.
• RIC-E1 and RIC-T1 feature front panel LEDs to indicate transmit/receive activity, E1/T1 signal loss condition and diagnostic loopback operation.
The rear panel LEDs of the Ethernet interface modules indicate the LAN status and activity.
• RIC-E1 and RIC-T1 are also available as plug-in cards for RADís ASM-MN-214, 19-inch card cage.

SPECIFICATIONS

E1/T1 INTERFACE
• Data Transmission Synchronous, full duplex
• Standard E1 or T1, unframed
• Line Code E1: HDB3 or AMI T1: B8ZS or AMI
• Line Impedance E1: 120Ω, balanced and 75Ω, unbalanced T1: 100Ω, balanced
• Range Up to 300m (1000 ft) over 24 AWG (0.5 mm) cable
• Connectors E1: RJ-45, 8-pin, balanced and two BNC coaxial, unbalancedT1: RJ-45, 8-pin, balanced


DTE INTERFACE
• Type V.35: via 34-pin, female X.21: via 15-pin, D-type, female RS-530: 25-pin, D-type, female V.36: 37-pin, D-type, female, via adapter cable IR-ETH (Ethernet bridge): RJ-45or BNC IR-ETH/QN (Ethernet/Fast Ethernet bridge): RJ-45IR-IP (IP router): RJ-45

SSMB RF connectors to N Male

SSMB RF connectors are microminiature devices that provide repeatable electrical performance from DC up to 4 GHz. They are a smaller version of the standard SMB connector, providing a means of quick-connect and disconnect through a snap-on type coupling.

Moreover, the typical applications for SSMB connectors are radio systems, video equipment, telecommunications and GSM.

Sierra Wireless AirCard 885u

Sierra Wireless AirCard 885u

Compact form factor Internal antenna Connect to USB port or docking cradle Worldwide use - HSDPA & UMTS, quad band EDGE/GPRS Supported OS: Windows Vista, XP, 2000 and Mac OS X

* Wireless download speed up to 7.2 Mbps and upload to 2 Mbps (upgradeable to 5.76 Mbps)
* Support GPS (Global Positioning System)
* Familiar USB connection
* Small, durable, fixed design
* microSD memory expansion slot
* TRU-Install, automatic software installation

Sierra AIRCARD® 881U USB MODEM WIRELESS WIDE-AREA USB MODEMS FOR HSPA NETWORKS

Sierra Wireless is a recognized industry leader in developing wireless data products and enabling software. Sierra Wireless modems and software connect people all over the world with mobile broadband networks that keep them in touch, informed, and productive from wherever they need to be. The Company offers a diverse product portfolio addressing enterprise, consumer, original equipment manufacturer, machine-to-machine, and specialized vertical industry markets. Sierra Wireless also provides professional services to customers requiring expertise in wireless design, integration, and carrier certification.

Sierra AIRCARD® 881U USB MODEM WIRELESS WIDE-AREA USB MODEMS FOR HSPA NETWORKS

Technical Specifications

Technology
USB Modem (USB Port)
MSM 7200 Chipset
UMTS with HSDPA Category 8/6/12 (7.2/3.6/1.8 Mbps downlink)
HSUPA Category 5 (2.0 Mbps uplink)EDGE/GPRS MS Class 12
WCDMA receive equalizer with dual antenna diversity

Bands
850/1900/2100MHz WCDMA Power class 3 (+24dBm)
850/900MHz GSM/GPRS/EDGE GSM Power class 4/EDGE E2
1800/1900 MHz GSM/GPRS/EDGE GSM Power Class 1/EDGE E2
GPS/1575 MHz

Operating System Support
Windows® Vista, XP, 2000,Mac OS X

Dimensions
93mm (L) 39mm (W) x 20mm (H)
Weight: 60 grams (includes battery)

LS-2 POWER LEAP ELECTRONIC WireLine Simulator

The LS-2 is a pre configured wireline simulator designed to provide a complete solution for the accurate replication of all the loopsets specified by the ITU-T G.991.2/G.shdsl (Annex A) standard.Features:

• Simulates of 26 AWG up to 23.5kft with 0.5kft minimum resolution. Support ADSL, HDSL, T1 and E1 Modems/Transceivers test requirement.
• Remote control via an RS-232 interface provides the user with full flexibility and commonality with other systems.
• Provide PC control software, it supports Window 95/98/2000/ME/NT operation system and also includes simple C and VB.
• It has 7-segment LED display, indicate simulating cable length.
• Use 19 standard instrument
• Case structure and easy to construct their own test base.

Specification:

Cable feature:

• Cable Type: 26 AWG
• Individual Line Distance 500ft to 26 Kft.

DC Characteristics:

• MAX 100mA, 300V DC, Frequency MAX 1.5 MHz.

Connection feature:
1. Front control board 8 way RJ-45 connection -----2 port
2. Back control board 8 way RJ-45 connection----- 2 port
3. Ground connection --------- 1 port

Display:
1. 3 digit red 7 segment LED display
2. Remote control indicate light

Input

Input switch:
1. Power Switch------------------------- 1
2. Line Length button------------------ 6

I/O interface:
1.RS-232C serial ports ----------------- 1

Standard Accessories:
1. Test System Chassis ---------------- 1
2. Operation Software on disk -------- 1
3. RS-232 Connect Cable -------------- 1
4. Operation Manual -------------------- 1
5. Power Cord ---------------------------------- 1

Physical and Environment specifications:
1. Weight : 5.4Kgs
2. Dimensions: 88.5 430 386mm
3. Operative temperature: 0 0 +5 C to 45 C
4. Operative humidity: up to 90% non-condensing

Electric appliance Specification:
1. AC 110V/220V AC input
2. RS-232 Port Remote interface

RAD HTU-2 HDSL Termination Unit

Using HDSL technology, HTU 2 extends the range of digital equipment up to 4.8 km (3.0 miles) over 24 AWG (0.5 mm), 4 wire copper cable. Using the HDSL repeater extends the range up to 8.4 km (5.2 miles) between the central office and customer premises.

• HTU-2 eliminates the need for repeaters or optical cable in the last mile (local loop) or in the campus network environment.

• Using advanced equalization, adaptive-filtering, echo cancellation technology and 2B1Q line coding, HTU 2 compensates for line impairments, bridge taps and mixed cabling. High immunity to background noise enables transmission of multiple HDSL lines via the same physical cable.

• Two clock modes are available:
  
  • Internal - available only when the unit is configured as "CENTRAL". In this mode, the internal clock generator provides clock to the digital interface and the HDSL line.
  • External - available when the unit is configured as either "CENTRAL" or "REMOTE". In "CENTRAL" mode, the clock is recovered from the digital interface and passed to the HDSL interface. In "REMOTE" mode, the clock is recovered from the HDSL interface and passed to the digital interface.

• Setup, control and monitoring of status and diagnostics information can be performed using one of the following:
  
  • Front panel LCD with three push buttons, using menu driven management
  • ASCII terminal connected to the async control port using command line interpreter
  • SNMP management station connected to the async control port, using Serial Link Interface Protocol (SLIP).

• The priority bumping feature allows the user to select the timeslot priority (high or low) in case one of the HDSL lines is down.

• HTU-2 is available as a standalone unit or as a rack mount card (HTU-2C) for the LRS-12 modem rack with SNMP management.

• HTU-2 is available in AC version and can be mounted in a standard 19" rack using special hardware. One or two HTU-2 units can be mounted side-by-side.

Typical applications:

• LAN-to-LAN connection
• High speed data transfer HDSL
• High speed Internet connection

G703 to V35 Converter

Convert standard G.703 to serial V.35 standard, merk OEM , dengan stock terbatas. silakan hubungi via e-mail atau telpon : 08165443875 sms juga bisa

USRobotics MP/16 modem pool

Total Control Managed MP/16 V.34 Contains 16 USR V.34 modem ports, based on USR's V.Everything Courier technology.

Also contains a mgt. Card allowing the modem ports to be managed by an SNMP-based manager, such as the SNMP-based Total Manager (TCM-SKU 001092-0 or 001091-0) or TCM-lite (SKU 001166-0 or 0014562-0)

telco interface: 16 analog RJ-11 connectors.

Mini DSLAM Infinity Network

Technical Specifications Mini DSLAM Infinity Network 24/48 port

Interfaces:

Network Interface
2 x 100/1000 Based-Tx or 2 x mini-GbE
Subscriber Interface 24/48 ports
ADSL2+/POTS/ISDN (G.992.1 .2 .3 .5)
Service Characteristics

Ethernet:
IEEE 802.1d Spanning tree protocol (STP)
IEEE 802.3ad Link aggregation
Security on console access
OSI Layer 2 Functionality
MAC filtering and count limit
Access control list (ACL)
Multicasting Support
Broadcast control and broadcast rate limit
Port-based and 802.1p/q Tag-based virtual local area network (VLAN)
IGMP v1/v2 snooping and Proxy
SNMP v1 and v2c
Remote Statistic (1, 2, 3, 9 groups)
System Configuration
Multiple-session TELNET
Supports point-to-point VCC link
Software Remote upgrade
Performance Monitoring
Monitors of line attenuation, noise margin, current rate, loss of signal, loss of framing loss of power and error second performance data.
Provides 15-minute and 1-day counters for history record
Alarm and Status Surveillance
Automatic alarm/LED indication for alarm and system status
Maintenance signal for OAM functionality
Four housekeeping inputs and One alarm contact closure outputs

Network management

Memory back-up
Database export and import functionality
RS-232 serial and Ethernet 10/100 port for local management
NMS/EMS for Multiple Nodes Management based on SNMP (optional)
Management Information Base (MIB)
RFC 1213 SNMP MIB II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2674 Q MIB
RFC 1757 RMON MIB, group 1,2,3,9
ADSL Line MIB
Proprietary MIB

Dimensions:
1.5U: 66mm x 482mm x 265mm (H x W x D) for 24 and 48 Ports with splitter built-in
Environmental
Operating Temperature: -10 degC to 65 degC
Operating Humidity: 5% to 95% non-condensing
Power Requirements:
Input: -48 V DC (-42 V to -56 V)
Input: AC 100 VAC to 240 VAC is feasible in future release
Dual A+B -48 V DC power input terminal

Certification :
ITU-T K.20
ETSI 300-019, 300-386 EN 60950
Conform to CE requirements RoHS