TF02-PRO LiDAR Mid-range distance sensor

TF02-PRO LiDAR Mid-range distance sensor

TF02-Pro is a single point ranging LIDAR sensor which is an upgraded version of the TF02. In TF02-Pro there is an increase in terms of performance and accuracy compared to the preceding version, TF02. TF02-Pro can generate a stable reading performance, accurate, sensitive, and with high frequency. 

features

• The distance sensor readings reached 40 meters
• Ambient light resistance mencapai 100 Klux
• Frame rate mencapai 1000 Hz
• Low power consumption
• Can be applied to intelligent traffic, intelligent parking lots, a material level of monitoring, UAV

Specification

• Detection Range: 0:05 - 40 meters @ 90% reflectivity (Further characteristics can be seen in the datasheet)
• Accuracy: ± 5cm (0.05-5m) | ± 1% (5-40m)
• Resolution distance: 1 cm
• Frame Rate: 100 Hz
• Repeatability: 1σ < 2cm（0.05-35m @ 90% reflectivity）
• Ambient Light Resistance: 100 Klux
• Working temperature: -20 - 60 ℃
• Protection: IP65
• Light Sources: VCSEL
• Center Wavelength: 850 nm
• FoV: 3°
• Photobiological Safety: Class 1（EN60825）
• Working Voltage: 5-12 VDC
• Consumption Flow: ≤200mA
• Power Consumption: ≤1W
• Peak Flow: 300mA
• Interfaces: UART / I2C
• Dimensi: 69 x 41.5 x 26 mm
• Cable Length: 80 cm

Document

Datasheet

Manual

TFmini-S LiDAR Module (Short-range distance sensor)

TFmini-S LiDAR is a LIDAR module that can emit near infrared and being able to measure the phase difference between the waves emitted by the received wave which this difference is used to determine the sensor distance to the object based on the principles of ToF. This sensor can perform a scan on the distance range of 0.1 - 12 meters as well as providing UART and I2C interface to access its data output, either through a microcontroller or a computer. 

features

• Has a high sensitivity, the sensor emits near infrared waves and catch the reflected waves to objects quickly and in a short time.
• Having a high level of precision, these sensors using ToF method for calculating the phase difference between the waves emitted by the wave received to obtain results with high precision distance measurements. Measurement accuracy is ± 6 cm for a distance of 0.1 - 6 meters and ± 1% for a distance of 6-12 meters.
• Diseediakan UART and I2C interface to access the sensor data output.

Specification

• Detection range: 0.1 - 12 meters
• Accuracy: ± 6cm @ 0.1 - 6 meters | ± 1% @ 6-12 meters
• Resolution Distance: 5 mm
• Frame Rate: 100 Hz
• Ambient Light Immunity: 70 Klux
• Working temperature: 0 ℃ - 60 ℃
• Light Sources: VCSEL
• Wavelength: 850 nm
• Security Fotobiologikal: Class1 (IEC60825)
• FoV: 2°
• Working voltage: 5V ± 0.1V
• The current consumption: ≤140 mA
• Power Consumption: ≤0.7 W
• Peak Flow: 800 mA
• Interfaces: UART / I2C
• Housing: ABS + PC
• Cable Length: 30 cm
• Dimensi: 42x15x16 mm

Document

• TFmini S Datasheet
• TFmini S Manual

RPLIDAR A1M8 - 360 Degree Laser Scanner Development Kit

RPLIDAR A1M8 was 360 degrees 2D LIDAR sensor developed by SLAMTEC. This sensor can scan 360 degrees at a radius of 12 meters (for models up included A1M8-R4 can do pemidaian in a radius of 6 meters). Two-dimensional scanned data can be used for mapping purposes (mapping), localization, as well as the modeling of objects or environments.

A1M8 RPLIDAR scanning frequency at 5.5 Hz when sampling in one round in 1450. And can be configured up to 10 hz. RPLIDAR A1M8 using Laser Triangulation Measurement System to measure the distance to the object, so that this sensor can perform super-accurate scanning for both indoor and outdoor environments that are not exposed to direct sunlight.

Application

• Floor cleaning robot navigation system
• scanning area
• 3D re-modelling
• Sensor for the localization and object avoidance robot / smart toy
• Applications common SLAM

Specification

• Scanning distance: 12 meters (maximum)
• Sampling Speed: 8000 Sa / s
• Angle Resolution: 1 °
• Resolution Distance: 0.2 cm
• Working voltage: 5V DC
• Frequency: 5.5 Hz
• Technology: OPTIMAG
• Scanning: 360 °
• Communication: Serial and USB
• Dimensi: 70 x 98.5 x 60 mm

Resource

• Software Development Kit (SDK)
• RPLIDAR Firmware
• RPLIDAR A18M 3D Model
• Github Repository
• A18M Datasheet
• Arduino & ROS Example

TFmini Plus LiDAR Module (Short-range distance sensor)

TFmini Plus is a single-point LiDAR sensor short distance which is the development of its predecessor version TFmini. In this version there is a significant increase in terms of performance, frequency of measurements, accuracy, stability, and reduction of blind zone distance. TFmini Plus also been equipped with IP65 standard case to protect the sensor from water and dust in the indoor or outdoor application.

Specification

• Detection range: 0.1 - 12 meters
• Working temperature: -20 ° C - 60 ° C
• FoV: 3.6°
• Accuracy: 1%
• Resolution: 5 mm
• Communications: UART, I2C, I / O
• Frame Rate: 1 - 1000 Hz

Document

• TFmini Plus Manual
• TFmini Plus Datasheet

Sample Applications

• Industrial Safety Distance Warning - Tower Crane
• Drones Obstacle Avoidance and Altitude Hold Mode
• Vehicle Crash Warning

TF Luna LiDAR

TF-Luna is a single-point ranging LIDAR using the principles of ToF to perform the object distance measurement. With optical and electrical design unique, TF-Luna can produce a stable performance, accurate, and sensitive. TF-Luna can detect objects at a maximum distance of 8 meters with a resolution of 1 cm, making it suitable for use in applications such as robotics, area mapping, drones and UAVs, and so on.

Specifications:

- Detection range: 0.2 - 8 meters

- Power consumption: = 0.35W

- FoV: 2 °

- Resolution: 1 cm

- Frame Rate: 100 Hz

CE30-D Solid-State Array LiDAR

CE30-D is a sensor Solid-State Arrays detection LIDAR with a very far distance, reaching 30 meters. The sensor has a small size so easily placed anywhere and use a metal case which meets the standards IP65 to provide maximum protection from water and dust. This sensor can output the data on the depth and gray in the range of 60 ° FOV angle (horizontal) and 4 ° FOV (vertical) simultaneously. CE30-D is a LIDAR sensor-type solid state, so there is no rotating components inside, it gives advantages in terms of long-term stability as well as the vertical detection range wider than LiDAR sensor with type rounds.

Specifications:

- Method: Time of flight

- Wavelength Maximum: 850 nm

- FOV: 60 ° (horizontal), 4 ° (vertical)

- Resolution Pixel: 320x20

- Frame Rate: 30 FPS

- Resolution: 1 cm

- Detection Range: 40 cm - 30 meters

- Repeatability: = 5 cm

- Accuracy: = 15 cm

- Ambient Light Resistance: 60,000 lux

- interface Data: UDP

- Power supply: 12V @ 3A

- Power consumption: 6 W

- Standard: IP65

- Eye Safety Class: EN 62 471 Exempt

- Dimensions: 83 x 57 x 54 mm

DATASHEET https://acroname.com/sites/default/files/assets/solid-state-tof-infrared-lidar-ce30-d-datasheet.pdf

CE30-C Solid-State Array LiDAR

CE30-C is a sensor Solid-State Array LIDAR with Field Of View (FOV) wide. The sensor has a small size so easily placed anywhere and use a metal case which meets the standards IP65 to provide maximum protection from water and dust. This sensor can output the data on the depth and gray in the range of FOV angle of 132 ° (horizontal) and 9 ° FOV (vertical) simultaneously. CE30-C is a LIDAR sensor-type solid state, so there is no rotating components inside, it gives advantages in terms of long-term stability as well as the vertical detection range wider than LiDAR sensor with type rounds.

Specifications:

- Method: Time of flight

- Wavelength Maximum: 850 nm

- FOV: 132 ° (horizontal), 9 ° (vertical)

- Resolution Pixels: 320x24 (device output), 660x24 (SDK output with no loss of FoV)

- frame Rate: 20 FPS

- Response: 200 ms

- Resolution: 1 cm

- Detection Range: 10 cm - 4 meters

- Repeatability: = 4 cm

- Accuracy: = 6 cm

- Ambient Light supression: 60,000 lux

- interface Data: TCP

- Power supply power: 12V @ 2A

- power consumption: 6 W

- Standard: IP65

- Eye Safety Class: EN 62 471 Exempt

- Dimensions: 79 x 47 x 50 mm

DATASHEET https://www.roscomponents.com/en/index.php?controller=attachment&id_attachment=288

CE30-A Solid-State Array LiDAR

CE30-A is a Solid-State sensor with LiDAR Array Field Of View (FOV) wide. The sensor has a small size so easily placed anywhere and use a metal case which meets the standards IP65 to provide maximum protection from water and dust. This sensor can output the data on the depth and gray in the range of FOV angle of 132 ° (horizontal) and 9 ° FOV (vertical) simultaneously. CE30-A is a LIDAR sensor-type solid state, so there is no rotating components inside, it gives advantages in terms of long-term stability as well as the vertical detection range wider than LiDAR sensor with type rounds.

Specifications:

- Method: Time of flight

- Wavelength Maximum: 850 nm

- FOV: 132 ° (horizontal), 9 ° (vertical)

- Resolution Pixel: 320x24

- Frame Rate: 20 FPS

- Resolution: 1 cm

- Detection Range: 10 cm - 4 meters

- Repeatability: = 3 cm

- Accuracy: = 6 cm

- Ambient Light Resistance: 60,000 lux

- interface Data: CAN

- Power supply: 12V @ 2A

- Power consumption: 6 W

- Standard: IP65

- Eye Safety Class: EN 62 471 Exempt

- Dimensions: 79 x 47 x 50 mm

DATASHEET   https://www.robotshop.com/media/files/pdf2/de-lidar_ce30-a_datasheet_-_v011-en.pdf

HLM1230 5mW Laser Module Emitter - Red Line

Laser module with 5 mW power and wavelength up to 650 nm

Specifications:
- Output power: 2.5 m - 5 mW
- Working current: 10 mA - 25 mA
- Working voltage: 2.3 VDC - 8.0 VDC
- Wavelength: 650 nm
- Working temperature: 15 ° C - 35 ° C
- Focal point width: <2mm 3="" away="" meters="" p="" spotting="">- Dimensions: 12mm (diameter) x 35mm (length)


Warning: Avoid direct eye contact!

MT742L CCD High-Speed Long Range Engine

MT742L is a 32-bit ARM processor barcode scanner that uses a CCD scanner with a resolution of 2500 pixels. This barcode scanner works on a 3.3 VDC voltage, capable of scanning as many as 530 scans / second, and supports communication via USB (HID / VCOM) and UART interfaces.

• 3.3 V power supply
• Dimensions 32 x 24 x 11 mm
• USB interface and UART
• Read time of 2 ms
• LED light source
• Resolution 2500 pixels
• Ambient light rejection 70.000 lux

RE295 Laser Barcode Scan Engine

RE295 is a 32-bit ARM microcontroller based barcode scanner engine that uses laser as its scanning device. This device is capable of scanning as many as 200 scans / second and supports USB interface and UART as data access point.

• 5 VDC power supply
• Dimensions 38 x 30 x 18.5 mm
• USB interface (HID, VCOM) and UART
• 5 ms reading time
• Light source Photodiode
• Resolution 0.1 mm
• Ambient light rejection 4842 lux

RE293 Laser Scan Engine for barcode reader

RE293 laser scan engine is acquired several patents, scan barcode is fast, accurate barcode scanning for high resolution barcode up to 3 mil.

RE293 laser scan engine is ideal for OEM portable device and fixed mounting scanning application.

Small and compact size.
Quick and easy integration.
Fixed-mount or OEM applications.

Optical & Performance
Light Source
650 nm visible Laser
Sensor
Photo diode Laser
Scan Rate
100~110 Scans/Sec
Resolution
0.075 mm (3mil)
D.O.F
(Environment:800lux)
CODE-39 : 55~110mm @ 5 mil
CODE-39 : 30~200mm @ 10 mil
CODE-39 : 45~270mm @ 15 mil

Electrical
CPU
16 bit MCU
Operation Voltage
5VDC±10%
Working Current
< 120mA
Standby Current
< 40mA
Power Consumption
< 600 mW

Mechanical
Dimension
w38x L30 x H18.5mm
Weight
17g ± 5%
Cable
FPC 12pin (pitch=0.5mm)

System & Software Function
Configuration
Configuration barcodes
Configuration Utility(EzU/SCM)
Command(BEO)
Interface/ Profile
UART
USB Victual Com
USB KB(HID)
1D Symbologies
UPC-A/UPC-E, EAN-8/EAN-13, Industrial 2 of 5, Codabar, Matrix 2 of 5, Code 11, Code 93, Code 32, Code 128, Standard Code 39, Full ASCII Code 39, Interleaved 2 of 5, China Postal Code, MSI Plessy Code, UK Plessy Code, EAN/UCC 128, Telepen Code, IATA Code, GS1 Databar
2D Symbologies
GS1
EMI Emission
Functional after 4KV contact, 8KV Air discharge
Safety Approval
FCC Class B, CE, IEC 60825-1
Ambient Light
4,842 Lux

Environment & Safety Conformance
Operating Temperature
0°C~45°C / 32°F~113°F
Storage Temperature
-20°C~60°C / -4°~140°F
Relative Humidity
20%RH~85%RH(Non Condensing)

5mW Laser Module Emitter - Red Line

Module 5 mW laser power and wavelength to 650 nm

specifications:
- Output power: 2.5 m - 5 mW
- Workflow: 10 mA - 25 mA
- Working voltage: 2.3 VDC - 8.0 VDC
- Wavelength: 650 nm
- Working temperature: 15 ° C - 35 ° C
- The width of the focal point: <2mm 3="" away="" meters="" p="" spotting="">- Dimensions: 12mm (diameter) x 35mm (length)


Warning: Avoid contact with eyes!

Lutron DT-1236L LASER PHOTO/CONTACT TACHOMETER

Lutron DT-1236L LASER PHOTO/CONTACT TACHOMETER

Model : DT-1236L

* Patented, the best tachometer in the world.

* Long detecting distance for photo Tach. up to 2 meters.

* Photo & contact tachometer in one meter.

* Fast sampling time for low contact RPM measurement, automatic reverse display.

* Photo Tach. : 10 to 99,999 RPM

　Contact Tach. : 0.5 to 19,999 RPM.

　Surface speed : m/min, ft/min.

* Size : 215 x 67 x 38 mm, patented.

D810 Touch

The Leica DISTO™ D810 Touch is a 15 measurement mode LDM accurate to 1/16th of an inch. It features a touch screen UI,  integrated digital camera, a tilt sensor, and Bluetooth Smart.

The D810's exclusive Measure in Picture (MIP) technology can determine the height, width, area, diameter, or circumference of an object in a picture taken by the D810.  Bracket your target using pointers on the touch screen to remotely measure the width of a second story window, the area of a billboard, or the diameter of an above-ground tank.

With a 600'-plus range, the D810 Touch can acquire a target that is well beyond your eye's ability to see the laser point, especially outside. The point finder -- a 4x zoom digital camera with cross hairs on the LCD display -- solves this problem.

The farther you can shoot, the more obstacles there are to get in the way. Smart Horizontal allows you to shoot over obstacles so you can measure the level horizontal distance to your target.

At distance, even a small wobble in the tool translates to the laser point bouncing in wide arcs on your target. For best results when measuring long distances, keep your dot steady with a tripod and an adapter. The D810 Pro Pack includes a D810, a TRI70 Tripod, Leica's patented FTA360 Fine Tune Adapter,  and a hard case to keep it all organized.

Specifications

ISO 16331-1 certified typical measuring accuracy	± 0.04 in
ISO 16331-1 certified typical measuring range	up to 660 ft*
Measuring units	0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0'00" 1/32, 0.00 in, 0 in 1/32
Power Range Technology	Yes
Pointfinder with 4x zoom	Yes
Overview camera	Yes
Photograph file format	.jpg
Memory	Last 30 displays
Windows Software	DISTO Transfer with AutoCAD® plugin
Free App	iOS / Android
Data interface*	Bluetooth® V4.0 Smart
Measurements per set of batteries	up to 4000**
Multifunctional end-piece	Automatic recognition of measurement position
Batteries	Li-ion rechargeable
Tripod thread	¼”- 20
Protection class	IP 54 - splash water/ dust proof
Dimensions	6.4 x 2.4 x 1.2 in
Weight with batteries	8.5 oz
EAN/UPC	7640110694640

* Depending on ambient light and reflectivity of the target surface.