Friday, April 24, 2020

Face verification and body temperature detection terminal

A face recognition device as well as a thermal camera that uses face recognition algorithms and computer vision with the latest technology. This device supports face and palm verification with a large capacity and high recognition speed, and is supported by improved security performance in all aspects. This device adopts touchless recognition technology and added a new feature called temperature detection and masked individual identification where the subject can be recognized by his face and body temperature (even though wearing a mask) without making direct contact with a device to improve cleanliness. This device is also equipped with antispoofing algorithm to anticipate the presence of fake photos and video attacks. No less important too, 3-in-1 palm recognition can detect the palm of the hand with the time required which is only 0.35 seconds. Suitable for use in places that are a center of the crowd such as hospitals, airports, ports, stations, bus terminals, government buildings, etc. to anticipate the initial spread of a pandemic, such as the COVID-19 pandemic.
Specification
  • Screen: 5 inch touchscreen
  • Face Capacity: 6000 face samples
  • Palm Capacity: 3000 palm samples
  • Fingerprint Capacity: 6000 (standard), 10,000 (optional)
  • Card Capacity: 10,000
  • Transaction: 200,000
  • Operating System: Linux
  • Standard Function: 
    ID Card, ADMS, T9 Input, DST, Camera, 9-digit User ID, Acess 
    Levels, Groups, Holidays, Anti- passback, Record Query, Tamper 
    Switch Alarm, Multiple Verify Modes
  • Hardware: 900MHz Dual Core CPU, Memory 512MB RAM / 8G Flash, 2MP WDR Low Light Camera
  • Komunikasi: TCP/IP, WiFi (Optional), Wiegand input / output, RS485
  • Access Control Interfaces: Electric Lock, Door Sensor, Exit Button, Alarm output, Third-party Auxiliary Input
  • Face recognition time: ≤1 second
  • Algoritma Biometrik: ZKFace V5.8 & ZKFinger V10.0 & ZKPalm V12.0
  • Power Supply: 12V 3A
  • Humidity: 10% - 90%
  • Dimensi: 91.93 x 202.93 x 21.5 (mm)
  • Software: ZKBioAccess

Thursday, April 23, 2020

Handheld UHF RFID Reader With Circular Polarized Antenna type C3000C-R2000
The UHF RFID reader is based on the Windows CE 6.0 operating system and is powered by an 800 MHz Cortex-A8 processor and is combined with 256MB RAM, 4GB of flash memory, and an SD card slot with a maximum capacity of 32GB. In terms of RFID reader, this device uses the R2000 module which has high and stable performance and is compatible with UHF RFID tags with the EPC C1 GEN2 / ISO18000-6C protocol. This device is also equipped with the best quality Zebra 1D / 2D barcode scanner that can make barcode reading quickly and accurately. For connection, this device is equipped with wifi and bluetooth to ensure you can send data easily. All the features offered are wrapped with a capacity of 3200 mAh and 5200 mAh batteries to support your activities all day.
Specification

  • Dimensions: 192 x 87 x 151 mm
  • Screen: 3.5 'QVGA (240 * 320) 6.5M colors
  • Touch Panel: Rugged resistive touch panel
  • Main Battery: 3200 mAh Li-ion
  • Pistol Battery: 5200 mAh Li-ion battery
  • Memory Slots: 1 MicroSD
  • Interface: MicroUSB (OTG)
  • Audio: 0.5W speaker
  • Operating System: Windows Embedded CE 6.0
  • SDK: Yes
  • Programming Languages: C ++, C #, VB.NET
  • Tool: Visual Studio 2005/2008
  • Network: IEEE802.11 a / b / g / n Wifi & Bluetooth 2.0
  • CPU: Cortex-A8 800MHz
  • RAM + ROM: 256MB + 4GB
  • Fingerprint: TCS1 / TCS2SS (Capacitive) @ 508 DPI
  • UHF Reader Module: CM2000-1 based on Impinj Indy R2000
  • Frequency: 865MHz-868MHz / 920-925MHz / 902-928MHz
  • Protocol: EPC C1 GEN2 / ISO18000-6C
  • Antennas: Circular polarization (4dBi)
  • Power: 1W (30dBm, + 5dBm to + 30dBm adjustable)
  • R / W distance:> 8 meters
  • Tag Read Speed:> 200 tags / second
  • 1D Barcode: Honeywell N4313 / Zebra SE965
  • 2D Barcode: Zebra SE4500
  • 1D Symbologies: UPC / EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
  • 2D Symbologies: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
ONINE ORDER:  https://tokopedia.com/rosesana/handheld-uhf-rfid-reader-with-antenna-circular-polarized-type-c3000c-r

DATASHEET & MANUAL
http://203.86.28.33:15629/Files/WebSite/C3000UHF-EN.pdf
http://203.86.28.33:15629/Files/User%20Manual/C3000%20User%20Manual.pdf

Monday, April 20, 2020

Dobot Robot Vision Kit

Dobot Robot Vision Kit is a vision kit for Dobot that uses an industrial HD camera with a 16 mm lens and an auxilary lamp that can adjust its brightness level. The camera in this kit communicates via USB 2.0 and you can calibrate and program it using the supplied Dobot Studio software. This kit also provides an extension rod that allows you to attach the vision kit to the robot arm stand and adjust the height of the camera according to the required distance. With this kit you can teach the Dobot robot arm (for example: Dobot Magician) to recognize, select and sort colored objects, or you can design even more complex industrial applications. Vision kits help you to develop your skills as an AI creator,
Dobot Robot Vision Kit
Specification
  • Uses HD color industrial camera
  • 3 million pixels
  • Pixel Size: 3.2 x 3.2 um
  • Frame Rate: 12 @ 2048 x 1536
  • Filter: 650 nm
  • SNR: 42 dB
  • Dynamic Range: 61 dB
  • Exposure Time: 50.8 um-3329 ms
  • Dimensions: 40 × 45 × 45 mm
  • Equipped with a USB 2.0 interface
  • Working Temperature: 0 to 70 ° C
  • Equipped with auxilarry lights (white)
  • Wavelength: 455-457.5 nm
  • Tegangan Output: 12V
  • Power: 3.5-5W
  • Operating Distance: 35-110 mm
  • Diameter Internal: 40 mm
  • External Diameter: 70 mm
  • Height: 25 mm
  • Outside Barrel Lamp Diameter: 39 mm (max)
  • Focus: 16 mm
  • Aperture: F1.4-F16C
  • Focus Point: 0.3m-Inf
  • Kontrol Aperture: manual
  • Equipped with manual zoom & aperture
  • Camera Dimensions: 165 x 124 mm 2/3 "
  • Back Focus: 13.1 mm

Note:  This kit only consists of Vision Kit, Arm robot units are not included in the sales package.
image title
image title

Friday, April 17, 2020

Temperature Detection, Mask Detection & Facial Recognition 3 in 1 System

It is a device that combines facial recognition capabilities, thermal cameras, and mask detection in a compact system. This product comes with an LCD with an 8 inch landscape display, making it easier for you to observe information about facial recognition along with the body temperature of people that are detected by the camera continuously. This system also implements various functions that are very useful for mass monitoring of human temperature such as face-based access control, anti-spoof, fever detection, attendance reporting, and warning when not wearing a mask. It is ideally applied to airports, ports, stations, bus terminals, schools and other centers, as a first step to prevent the spread of the COVID-19 pandemic.
Temperature Detection, Mask Detection & Facial Recognition 3 in 1 System
Product Features
  • Life detector
  • Face recognition algorithm despite wearing a mask
  • Can recognize faces quickly
  • Supports application in complex environments, such as in a crowd
  • Supports a local database that can store 25000 subject data
  • Equipped with a warning feature when not wearing a mask
  • Using non-contact infrared technology to detect human temperatures with accuracy reaching ± 0.3 ° C
  • Can display body temperature in real-time
  • Equipped with a fever warning


Specification
  • Processor: 3516DV300
  • Operating System: Linux
  • Memory: 16 GB eMMC
  • Camera Sensor: 1 / 2.7 ″ Progressive Scan CMOS
  • Focal Length: 4 mm
  • Face Recognition Distance: 0.5 - 2 meters
  • Face Recognition Time: <1 li="" second="">
  • Face Database: 22400 more face samples and 100,000 face recording history
  • Relay: 1 channel
  • Power Supply: 12V @ 3A
  • Network: RJ45 10M / 100M Adaptive Ethernet Port
  • Wigan Output: Wigan Interface Output, supports Wigan 26 and 34
  • USB: 2 USB ports
  • Camera: RGB camera and 850nm infrared camera
  • RGB Camera Resolution: 1920x1080
  • Power Consumption: 20W maximum
  • Screen: 8 inch
  • Thermal Camera Detection Range: 20 ° C - 50 ° C
  • Camera Thermal Detection Distance: 0.4 - 1 meter
  • Thermal accuracy: ± 0.3 ° C
  • NETD: ≤60mk
  • Wave Range: 8-14 um

Saturday, April 11, 2020

Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board

Wio Terminal is an ATSAMD51 based microcontroller with support for wireless connectivity from Realtek RTL8720DN. CPU on Wio Terminal mapu running at speeds of 120 MHz (can be boosted up to 200 MHz). The Realtek RTL8720DN chip supports Bluetooth 5.0 and WiFi 2.4 & 5 GHz connections as a backbone to support data transmission on your IoT project. Wio Terminal is also equipped with a 2.4 inch LCD, on-board IMU sensor (LIS3DHTR), microphone, buzzer, micro SD slot, light sensor, and IR emitter to support your project variations. On the other hand, Wio Terminal has also been equipped with a grove connector to connect the device to the grove modules and a 40 pin header to connect the device to the Raspberry Pi. 
Product Features
  • Integrated hardware design, combining microcontrollers, wireless modules, sensors, and I / O devices in one module
  • Powered by the powerful Microchip ATSAMD51P19 microcontroller chip
  • Equipped with Realtek RTL8720DN to provide wireless network support with the latest technology such as dual-band wifi and bluetooth 5.0
  • Supports USB OTG functionality
  • Equipped with a grove connector to connect the Wio Terminal to the grove module
  • Can be used as a Raspberry Pi HAT
  • Supports development platforms such as Arduino, Micro Python, Arupy, AT firmware
Specification
  • MCU: ATSAMD51P19 ARM® Cortex®-M4F @ 200 MHz
  • Memori Flash: 4 MB
  • Working Temperature: -40 ° C - 85 ° C
  • LCD: 2.4 inch @ 240x320
  • Driver LCD: ILI9341
  • Modul Wireless: RTL8720DN
  • Wifi: 802.11 a/b/g/n 1x1, 2.4GHz & 5GHz
  • Bluetooth: Bluetooth 5.0
  • Accelerometer: LIS3DHTR
  • Mikrofon: 1.0V-10V -42dB
  • Speaker: ≥78dB @10cm 4000Hz
  • Light Sensor: 400-1050nm
  • IR Emitter: 940nm
  • Slot Micro SD: Maksimum 16 GB
  • Pin I/O: 40-PIN (Raspberry Pi Compatible) dan grove connector
  • FPC: 20-Pins
  • USB Type-C: Power & USB-OTG
  • Antarmuka Operasi: 5-Way Switch, Power/Reset Switch, User-defined button 
  • Dimensi: 72x57x12 mm
  • Material Case: ABS+PC
Application Example
  • Python Terminal Device
  • Data Collection Device for Machine Learning
  • Hand-held Device
  • Retro Gaming Device
  • IoT Controller
  • Education
  • Prototyping
  • Slave device / Accessories for Raspberry Pi

Wio Link

Wio Link is a module designed to facilitate the development of your IoT project. This module is based on an open-source wifi chip, ESP8266. This module also supports RESTful API so that it can also be connected to a mobile app. This module also uses a grove connector, so you can connect various sensors and other I / O components to this board plug-and-play to create various IoT projects, without the need for breadboars, without the need for soldering, and without the hassle of wiring complicated one.
Product Features
  • Uses the ESP8266 wifi chip
  • Supports OTA firmware updates
  • Uses a plug-and-play grove interface
  • Supports the IFTTT application
  • Compatible with Android and iOS applications
  • Compatible with RESTful APIs
  • Equipped with a socket for the battery
Specification
  • Dimensi: 55 x 48 x 6.5 mm
  • Protokol Wifi: 802.11b/g/n
  • Enkripsi Wifi: WEP/TKIP/AES
  • Memori Flash: 4 MB
  • Arus: 1000 mA (max)
  • Working Voltage: 3.3V
  • Input Baterai: 3.4 - 4.2V

Seeeduino XIAO - Arduino Microcontroller - SAMD21 Cortex M0+

Seeeduino XIAO is an Arduino compatible mini microcontroller which comes with a powerful MCU chip with low power consumption, namely SAMD21G18 ARM® Cortex®-M0 +. On the other hand, this tiny microcontroller board has good performance in data processing and instructions but still requires low power. The small design also makes it usable for creating wearable projects and other small projects. Beyond its powerful CPU, Seeeduino XIAO also presents a variety of amazing functions. This board has 14 GPIO pins, of which 11 pins can be used as analog I / O, 11 digital pins, I2C, UART, and SPI. Some pins also have various functions, pins A1 / D1 to A10 / D10 have PWM functions and pins A0 / D0 have DAC functions. Seeeduino XIAO supports USB TYPE-C interface for power supply lines and for downloading data from a computer to the microcontroller chip. This board also provides a power pad to line the power supply through the battery, so it can be the perfect solution for your wearable project.
Seeeduino XIAO - Arduino Microcontroller - SAMD21 Cortex M0+
image title
Product Features
  • Powered by a powerful microcontroller chip, the SAMD21G18 ARM® Cortex®-M0 + with 256 KB flash memory and 32 KB SRAM
  • Compatible with Arduino IDE
  • Can be applied with breadboard for prototyping project
  • Has a small size that is only as big as a thumb (20 x 17.5 mm) so it is very suitable for wearable projects
  • Provides abundant development interfaces such as 11 digital / analog pins, 10 PWM pins, 1 DAC output, 1 SWD Bonding pad interface, 1 I2C pin, 1 UART pin, and 1 SPI pin.
image title
Specification
  • Working Voltage: 3.3V
  • MCU: SAMD21G18 ARM Cortex-M0+ @ 48 MHz
  • Memori: 256 KB Flash,32 KB SRAM
  • I/O: 14 GPIO,11 analog, 11 digital, 1 DAC output
  • Antarmuka: I2C, UART, SPI
  • Power Supply and Data Download Line: USB Type-C 
  • LED: 1x user LED, 1x power LED, 2x LED untuk serial port downloading
  • Reset button: two reset button short connect to reset
  • Power Pads: For power supply via batteries
  • Software: Arduino IDE
  • Protection: Projection cover to protect electronic network
  • Dimensi: 20 x 17.5 x 3.5 mm
image title
Product Equipments
  • 1 x Seeeduino XIAO - Arduino Microcontroller - SAMD21 Cortex M0+ 
  • 2 x 7 pins header
  • 4 x pasters
Note:  This microcontroller works at 3.3V voltage level, giving an input voltage exceeding 3.3V to the I / O pin potentially damaging the microcontroller chip.

Creality CR-10 V2 3D Printer

Creality CR-10 V2 is an upgraded 3D printer machine from its predecessor, the Creality CR-10. Creality CR-10 V2 presents 7 types of upgrades from its predecessor version, which include using two cooling fans for faster cooling of the filament, featuring changeable features direct drive titan, using Meanwell 350W power supply to supply more stable power, using an extruder kit with full-metal material, supports the addition of BLTouch sensors for auto-leveling, uses TMC2208 type motherboards to produce anti-noise performance, and supports the resume printing feature to continue the print process when the machine loses power suddenly, for example during a power outage. Creality CR-10 V2 can print objects with a maximum dimension of 300 x 300 x 400 mm with a precision level of ± 0.1 mm.
image title
Product Features
  • Use two cooling fans for faster cooling of the filament
  • Presenting changeable features of Titan Direct Drive
  • Uses Meanwell 350W power supply to supply more stable power
  • Using a full-metal extruder kit m
  • Supports the addition of BLTouch sensors for auto-leveling
  • Uses TMC2208 type motherboard to produce anti-noise performance
  • Supports resume printing feature to continue printing when a machine loses power suddenly, for example during a power outage

Specification
  • Technology: FDM
  • Print Dimensions: 300x300x400 mm
  • Print Speed: Up to 180 mm / s
  • Precision: ± 0.1 mm
  • Layer thickness: 0.1 - 0.4 mm
  • Diameter Nozzle: 0.4 mm
  • Number of Nozzles: 1
  • Tempertur Bed: ≤100℃
  • Print Method: Online via USB cable or offline via micro USB cable
  • Format File: STL\OBJ\AMF
  • Software Slicer: Cura\Repetier-Host\Simplify 3D
  • Operating System: MAC \ Linux \ WindowsXP \ Vista \ 7 \ 8 \ 10
  • Power Supply: Meanwell 350W
  • Autoleveling: Optional
  • Filamen: PLA / ABS / PETG / TPU
  • Filament Diameter: 1.75 mm


Friday, April 10, 2020

ODYSSEY - X86J4105864 Most expandable Win10 Mini PC (Linux and Arduino Core) with 8GB RAM + 64GB eMMC

ODYSSEY is a SBC (Single Board Computer) series that allows you to create various edge computing applications. ODYSSEY - X86J4105 is powered by Intel Celeron J4105, which is a processor with a 1.5 GHz Quad-Core CPU capable of being banned up to 2.5 GHz. This SBC has also been embedded with an ATSAMD21 ARM Cortex-M0 + (Arduino compatible) microcontroller chip, so it can program the Arduino on the x86 platform. ODYSSEY - X86J4105 presents all the features of a mini PC, ranging from 8GB DDR4 RAM, 64GB eMMC, wifi & BLE, dual gigabyte ethernet ports, audio input & output, USB ports, HDMI, and SATA & PCIe connectors. For the operating system, ODYSSEY - X86J4105 is compatible with Windows 10 and Linux, but the default operating system included is Windows 10.
Specification
  • Prosesor: Intel® Celeron® J4105 (Frequency: 1.5 - 2.5GHz)
  • Co-prosesor: Microchip® ATSAMD21G18 32-Bit ARM® Cortex® M0+
  • Grafik: Intel® UHD Graphics 600 (Frequency: 250 – 750MHz)
  • RAM; LPDDR4 8GB
  • Wireless Connection: Wi-Fi 802.11 a / b / g / n / ac @ 2.4 / 5 GHz HT160 & Bluetooth® 5.0
  • Networking: Intel® I211AT PCIe Gigabit LAN, Supports Wake-On-LAN, Supports PXE
  • Audio: Microphone + headphone Combo Connector
  • Header: 1 × 40-Pin header compatible with Raspberry Pi, 1 × 28-Pin header (SAMD21G18), 1 × Front Panel Audio Connector, 1 × 4-Pin herder (UART function from SAMD21G18), 1 × Fan Port (4 pin 1.25mm PWM 5V), 3 × 4-Pin SATA Power Connector, 1 × 4-Pin herder (Power and Switch)
  • USB:USB 2.0 Type-A x2, USB 3.1 Type-A x1, USB 3.1 Type-C x1
  • Interface Video: HDMI2.0a: Up to 4096x2160 @ 60Hz 24bpp / DP1.2a: Up to 4096x2160 @ 60Hz 24bpp
  • Slot Ekspansi: M.2(Key B, 2242/2280): SATA III, USB2.0, UIM; M.2 (Key M, 2242/2280): PCIe 2.0 ×4; Micro SD card Socket; SIM Card Socket; SATA III
  • RTC: JST 1.0 CR2032 3V
  • TPM: Built-in TPM (2.0)
  • Power supply: DC Jack 5.5/2.1mm atau USB Type-C PD; DC Jack input: 12-19V DC; USB Type-C input: 12V DC
  • Default Operating System: Windows 10
  • Dimension: 110 x 110 mm
Application Example
  • Mini PC
  • NAS (Network-Attached Storage)
  • Edge Computing
  • Router
  • Robotics
  • Industrial Applications
  • Media Center
  • IT Industry
  • Educational Fields
  • Thin Client
  • Server Cluster
  • IoT Gateway
Product Equipments
  • ODYSSEY - X86J4105 x 1
  • User Manual x 1
  • International Power Adapter
  • SATA Cable x 1
  • Antenna x 2
  • RTC Battery x 1
  • Heat Sink(Assembled)
  • Cooling Fan (Assembled) 

ODYSSEY – STM32MP157C Raspberry Pi 40-Pin Compatible with SoM

ODYSSEY - STM32MP157C is based on STM32MP157C, a dual-core processor integrate Arm-Cortex-A7 plus Cortex-M4, fully compatible raspberry 40-pin, formed by SoM - STM32MP157C plus a Carrier board.


Key Feature

  • Dual-core Arm-Cortex-A7 core processor with Cortex-M4 integrated
  • SoM(system on module) includes MPU, PMIC, RAM. 
  • Raspberry Pi 40-Pin Compatible Carrier Board.
  • Compact size and powerful.
  • Open-source hardware/SDK/API/BSP/OS.

Description

The ODYSSEY – STM32MP157C is a single board computer that based on STM32MP157C, a dual-core Arm-Cortex-A7 core processor operating at 650Mhz. The processor also integrates an Arm Cortex-M4 coprocessor, which makes it suitable for real-time tasks. The ODYSSEY – STM32MP157C is created in a form of SoM(system on module) plus a Carrier board. The SoM has consisted of the MPU, PMIC, RAM and the carrier board is in Raspberry Pi form factor. The carrier board includes all the necessary peripherals including Gigabytes Ethernet, WiFi/BLE, DC Power,USB Hosts, USB-C, MIPI-DSI, DVP for the camera, audio, etc. With this board, customers can fast evaluate the SoM and deploy the SoM on their own carrier board easily and quickly.

Specification

SoM – STM32MP157C
  • MPU: STM32MP157C
    • 32-bit dual-core Arm Cortex-A7
    • 32-bit Arm Cortex-M4 with FPU/MPU
  • PMU: ST PMIC STPMIC1A
  • RAM: 512MB DDR3 RAM
  • Flash: 4GB EMMC
  • Peripherals: 3 x Board-to-Board 70-Pin Connectors
  • Size: 38mm x 38mm
Carrier Board
  • Peripherals
    • 2 x USB Host
    • 1 x Gigabit Ethernet
    • 1 x 3.5mm Audio
    • 1 x MIPI DSI for Screen
    • 1 x DVP for Camera
    • 2 x Grove (GPIO & I2C)
    • 1 x SD Card Slot(on the back)
  • WiFi/BLE
    • WiFi 802.11 b/g/n 2.4GHz
    • Bluetooth 4.1 with BLE
  • LED: 1 x Reset 3 x User 1 x Power
  • Power: 1 x DC Jack 12V~24V/2A (12V/2A power input is recommended) 1 x USB Type-C
  • Button: 1 x Reset 1 x User 1 x Switch
  • Dimensions: 56mm x 85mm

Applications

  • Industrial (CAN-Ethernet gateways etc)
  • White goods(refrigerators, microwaves etc)
  • Medical(data loggers etc)
  • High-end wearables(VR device etc)
  • Smart Home Devices

Carrier board Pinout Diagram