Tuesday, September 29, 2009

VIP-1680 series VoIP Gateway

The PLANET VIP-1680 series VoIP Gateway are dual standard (SIP and H.323) compliant residential gateways that provide a total solution for integrating voice-data network and the Public Switched Telephone Network (PSTN). The VIP-1680 series not only provide high-quality voice communications but also offer secure, reliable Internet sharing capabilities for daily voice and Internet communications.

With advanced DSP processor (TI) and cutting-edge VoIP technology, the PLANET VIP-1680 series are capable of handling both SIP and the H.323 calls. With up to 16 registrations to the SIP proxy or H.323 Gatekeeper and allows 16 lines analog voice and fax communication over a traditional data communications/data networking digital Internet, the VIP-1680 series are able to make calls to either H.323 or SIP voice communication environment. The VIP-1680 series are equipped with a Ethernet switch and built-in NAT router function that provides Internet access using only one IP address; with these features, users can now enjoy high-quality voice calls and secure Internet access without interfering with routine activities.

Meanwhile, the PLANET VIP-1680 series are designed in comfort and ease-of-use for customers. The VIP-1680 series not only inherit traditions of quality voice communications and real-time fax data over IP networks but also eliminate the human resource in VoIP network deployment. With optimized H.323/SIP architecture, the PLANET VIP-1680 series are ideal choices for P2P voice chat, ITSP cost-saving solution, as well as providing network-converting feature to translate the packet network into traditional PBX system.

With built-in PPPoE/DHCP/DDNS clients, up to 16 concurrent connections can be offered in VIP-1680 series, therefore voice communications can be established anywhere around the world. The PLANET VIP-1680 series come with intuitive user-friendly yet powerful management interface (web/telnet/console) that can dramatically reduce IT personnel resource and complete VoIP deployment in a short time. With the remote management capability provided, the VoIP administrators can monitor machine/network status, or proceeds maintenance/trouble-shooting service via Internet browser or telnet session. Besides, the VIP-1680 series provide voice channels status display and optimized packet voice streaming over managed and public (Internet) IP networks.

VIP-1680 H.323 / SIP VoIP Gateway (1 x WAN, 1 x LAN, 8 *FXO/8 * FXS; life line support)
VIP-1680FO H.323 / SIP VoIP Gateway (1 x WAN, 1 x LAN, 16 * FXO)
VIP-1680FS H.323 / SIP VoIP Gateway (1 x WAN, 1 x LAN, 16 * FXS)

Tuesday, September 22, 2009

PSoC Express 3.0 Education kit

Cypress’s PSoC(TM) mixed-signal arrays are programmable systems-on-chips (SOCs) that integrate a microcontroller and the analog and digital components that typically surround it in an embedded system. A single PSoC device can integrate as many as 100 peripheral functions with a microcontroller, saving customers design time, board space and power consumption.

CY8C27443 is M8C Processor based. Its clocks speeds of up to 24 MHz, has 16K Flash 50,000 Erase/ Write Cycles, 256 Bytes SRAM. It also supports In-System Serial Programming. This chip contains 8x8 Multiply, 32-Bit Accumulate, 12 Analog Blocks, 8 Digital Blocks, 8- to 32-Bit Timers, Counters, and WMs, 2 UARTs, Multiple SPI, Connectable to all GPIO Pins , I2C bus, Watchdog and Sleep Timers.

PSoC microcontroller starter kit is a complete kit suitable for people who are beginning to learn and experiment on microcontrollers. The PSoC education board is modified from Cypress Semiconductor’s PSoC invention board , from a DIP module to a fully compact experiment board. On board LED provides opportunities for demonstration via the

LCD module connector. Similar to the PSoC invention board, the education board can receive data files via the PC USB port.

The PSoC education board has a CY8C27443 PSoC microcontroller on-board. It provides LED for demonstration and LCD module connector. It also has 3-Ports for experiments and Power supply is from a PC USB port or an external Power Supply. The kit includes a mini breadboard with 170 points.

The PSoC Express 3.0 Education kit includes:

* PSoC Education Board,
* 16 x 2 LCD module (16x2),
* ZX-SWITCH16 keypad board,
* USB cable,
* Components for Experiments
* CDROM Software and lab manual


RoboBuilder is the new building block robot kit. Designed for robot enthusiasts and education alike RoboBuilder hits a sweet spot with feature packed kits at great prices. RoboBuilder focused on form as much as function creating a great looking robot at the same time. The 5720T kit even sports translucent plastic with multicolored internal LEDs.

* Compact design
* Quick & simple joint assembly
* Speed & torque control
* Multi-drop full duplex UART serial communication
* External I/O support
* Precise PID control
* Reverse voltage & over current protection
* Metal bearings
* Multiple easy to use software interfaces
* Distance & sound detection

Friday, September 18, 2009

BC2100 Access Controller wiegand ( RFID )

BC2100 Access controller with wiegand output

  • Exquisite designs with non-masking Metal shell
  • Waterproof and weather resistant functions
  • keystroke backlight
  • Card appliance:125kHz EM cards
  • Reading range:up to 5 cm
  • 3x4 Matrix keypad
  • Wiegand 26 bit output
  • Application:luxurious office building,bank,Prisons

BC2008NT Network Access Controller (RFID)

BC-2008NT Network Access Controller   (Online Order)


  • Exquisite designs with non-masking Metal shell
  • Waterproof and weather resistant functions
  • keystroke backlight
  • Card appliance:125kHz EM cards
  • Reading range:up to 5 cm
  • Application:luxurious office building,bank,Prisons
  • 5000 Users,10000 Records
  • RS485 Network for 100 units
  • Card or card + Pin Verification
  • Anti-removal function

V1 video door phone with fingerprint

V1 video door phone
equipped with fingerprint

* TFT brightness adjustment
* TFT chroma adjustment
* Direct talk
* Special single CCD, Clear picture
* Direct control electronic lock
* Monitor
* Alarm
* Doorbell
* 120 Fingerprint users
* Infrared remote control keypad
* Working Voltage: 18V
* Working Current: 1000mA
* Relay load:3A
* Fingerprint Area: 20 mm × 16 mm
* Contrast Time:less than 1 second
* Fingerprint Capacity: 120
* FAR:0.0001%
* FRR:0.01%
* Operating noise: =60dB
* Operating Temperature: -10 - +45?
* Humidity 20% - 80%
* Total cable length: =80m

BC300 Access Controller station (RFID)

BC_300 Access controller
Ideal Selection For Business Safety,Office,Factory,etc.

Main technical parameter:
  • Working voltage:DC12V
  • Open key current:<>
  • Quiescent current:<>
  • Memory capacity:300 users
  • Induction Distance:5~15cm
  • Card type:EM
  • Working temperature:-10°C~60°C
  • Working humidity:10%~90%
  • Dimension:120 x115x23mm

Kyosan KRV100 , 15V / 6.7Amp

The 'Kyosan' KRV100 , 15V / 6.7Amp , Industrial standard Switching Power Suply. Adjustable voltage 12 to 18 VDC output.

Wednesday, September 16, 2009

Goot TL10 tool set

Goot TL10 tool set
Toolsets contains:
2.Cutting nippers
4.Miniature screwdriver (-)
5.Screwdreiver (+) No.1
6.Screwdreiver (+) No.2
7.Soldering iron
8.Screwdriver (-) 5mm
9.Hexagonal wrench 5.5 BOX
10.Desoldering wick
11.Tip cleaner
14.Tool bag

Ollo Action robot Construction Kit

Ollo Action robot Construction Kit , Robot Kit for beginner that can move. The Construction Kit can make 12 different kinds of robots with only single battery. Create , build and run your imaginative robot. Be a part of robot movement!

Ollo bug robotic kit

Ollo bug robotic kit, Make any bug that can controlled with a remote controller, trace line and even detect objects. There are 4 different bug you can make, but try making others thing well! Best Do It Your self Robot Construction Kit for Beginner.

Ollo Figure Kit robot

Ollo Figure Kit robot is reconfigurable robot construction kit for beginner of any age. Ollo figure can create any kinds of figure from a baby penguin to a horses. Build your imagination and creativity as you build each figure. Possible figure you can make: crabs, owl, penguin, parrot, eagle, dog, turtle, horse, donkey, human, pig , etc.


for beginner robotics enthusiast.


- CM-5 - Main Controller : 1 set
- AX-12+ - Dynamixel : 4 pcs [Torque : 12.5kgf.cm at 7V]
- AX-S1 : Dynamixel Sensor : 1 set
- SMPS (12V, 5A) : 1 [For power supply and charging]
- Battery (9.6V, AA type 8ea, Ni-MH) : 1 set
- Serial Cable
- Cables : 9 pcs
- Bioloid Software CD : Software Manual, 26 different examples and videos, sample application for AX-12+ and AX-S1.
- Quick Start : 14 different robot assembly directions including intro and download information.
- Bolt/Nut Set : 7 types (about 400 pcs)
- Nut Fixative Sticker


- Crossing Gate
- Universal Gauge
- Sound Level Meter
- Crocodile Mouth
- Pan Tilt
- Parking Gate
- Melody Car
- Robot Arm
- Cliff Detection Car
- Greeting Penguin
- Attacking Duck
- Obstacle Detection Car
- Clapping Penguin
- Walking Droid


- By assembling ad programming the 14 different robot examples provided, you can learn the basics of robot building.
- From a 1 DOF crossing gate to a 4 DOF car, walking droid, you can learn how to program and control them as well.
- If you add on 4 more AX-12+ dynamixels (that makes a total of 8 dynamixels), you can make intermediate level robots.
- If you purchase 14 more AX-12+ dynamixels and a Frame Set, that will make a Bioloid Comprehensive Kit, giving a total of 18 DOF – Degree of Freedom


Complete robot KIT, For advance users.


* AX-12+ - Dynamixel : 21 pcs [Torque : 12.5kgf.cm at 7V]
* AX-S1 : Dynamixel Sensor : 3 set
* CM-5 (Main Controller ) : 2 pcs (including batteries)
* ZIG-100 (Wireless Module ) : 1 set
* ZIG2Serial
* USB2Dynamixel
* Wireless Camera Set
* Image Recognition Library Support
* Wireless Communication with PC
* SMPS (12V, 5A) : 1 [For power supply and charging]
* Frame Set : 2 sets
* Spare Cable Sets
* Software CD
* Quick Start : 26 different robot assembly directions including intro and download information
* User Guide (Manual)
* Expert Manual (C Language Examples Available)
* Aluminum Case

iRobot Scooba® 330

iRobot Scooba® 330

Floor Washing Robot . Item Number: 5800

Preps, washes, scrubs and squeegees sealed hardwood, tile and linoleum floors on its own. It cleans beneath cabinet edges, tables, chairs and other hard-to-reach places while automatically avoiding rugs, carpets and stairs.

* Basic floor washing model
* Cleans 250 square feet or 1-2 rooms per battery charge
* One full tank washes up to 250 square feet
* 1 Virtual Wall®

Tuesday, September 15, 2009

RS-232 to RS-485/RS-422 powerless Bidirectional Converter

ATEN (IC485SN) RS-232 to RS-485/RS-422 Bidirectional Converter

ATEN's IC485SN is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000’), over four or two wire cable for full or half duplex, respectively. The ATEN's IC485SN converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. ATEN's IC485SN is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations.

ATEN (IC485SN) Bidirectional Converter Features Benefits:

* Data Transmission Controlled by the RTS Signal DCE/DTE Selectable Point to Point, Multidrop and Simplex/Duplex Link
* Selectable Four Wire Full Duplex / Two Wire Half Duplex Non Powered Operation Compact Size
ATEN (IC485SN) Bidirectional Converter Specifications:
Width 9.0 in. (22.9 cm)
Height 12.0 in. (30.5 cm)
Length 20.3 in. (51.4 cm)

Package Dimensions
Height 6.3 in. (16.0 cm)
Depth 2.3 in. (5.4 cm)
Width 9.5 in. (24.1 cm)
Case Plastic
Package Wt. 0.5 lb. (0.3 kg)
Case Wt. 13.5 lb. (6.1 kg)
Depth 0.8 in. (2.1 cm)
Width 2.2 in. (5.6 cm)
Height 3.2 in. (8.1 cm)
Data Rate Up to 100 Kbps under 4000ft. (1200m)
Function Switches SW1(DCE, DTE), SW2(TxON, RxON,TxRTS, RxON,TxDTR/RTS, RxDSR/ON)
Cable Distance 4000 ft. (1200 m)
Connectors 1 DB-25 Female, RS-485 / RS-422 Four Terminal Block, RJ11

BIOLOID Comprehensive Kit



- CM-5 - Main Controller : 1 set
- AX-12+ - Dynamixel : 18 pcs [Torque : 12.5kgf.cm at 7V]
- AX-S1 : Dynamixel Sensor : 1 set
- SMPS (12V, 5A) : 1 [For power supply and charging]
- Battery (9.6V, AA type 8ea, Ni-MH) : 1 set
- Serial Cable
- Cables : 25 pcs
- Bioloid Software CD : Software Manual, 26 different examples and videos, sample application for AX-12+ and AX-S1.
- Quick Start : 26 different robot assembly directions including intro and download information.
- Bolt/Nut Set : 11 types (about 1,000 pcs)
- Nut Fixative Sticker


- The 14 robot examples in the Beginner Kit
- Turtle
- Robot Flower
- Spider
- Excavator
- Probing Robot
- Fawn
- Gerwalk
- Battle Droid
- Puppy
- Dinosaur
- Kind Spider
- Humanoid


- By assembling and programming the 14 different robot examples provided, you can learn the basics of robot building.
- From a simple 1 DOF crossing gate to a 18 DOF king spider and humanoid walking droid, you can learn how to program and control them as well.

The Sensor Temperature module

The Sensor Temperature module is smart sensor temperature module that can measure range 0 - 100 °C with digital output in Celsius or Fahrenheit. This Modul can apply to standalone ON/OFF controller for temperature controller was set by user. Application ex: room controlled temperature, indoor/outdoor temperature sensor, and many various application that need temperature information.
Dimension : 5.1 (L) x 4.1 cm (W) x 1.5 cm (H).

- Base on LM35DZ temperature sensor and Microcontroler
- Capable Measure range 0 - 100 °C or 32 - 212 °F with 1° sensitivity.
- ON/OFF (schmitt trigger) port available, for temperature controller .
- Sampling periods controllable between 100 ms - 25 s.
- 1 Input port and 1 Output port READY for general purposes.
- I/O port compatible with level TTL and CMOS.
- UART TTL interface (baud rate 38400 bps) and I²C (bit rate max 50 kHz).
- Supply range DC 4,8 - 5,4 Volt.
- Sensor read sequence 15 ms (max)
- Program Sample available in C (CodeVisionAVR©).

Monday, September 14, 2009

SSMB RF connectors to N Male

SSMB RF connectors are microminiature devices that provide repeatable electrical performance from DC up to 4 GHz. They are a smaller version of the standard SMB connector, providing a means of quick-connect and disconnect through a snap-on type coupling.

Moreover, the typical applications for SSMB connectors are radio systems, video equipment, telecommunications and GSM.

DS18S20 High-Precision 1-Wire Digital Thermometer

DS18S20 High-Precision 1-Wire Digital Thermometer FEATURES:

�� Unique 1-Wire® Interface Requires Only One Port Pin for Communication
�� Each Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM
�� Multidrop Capability Simplifies Distributed Temperature Sensing Applications
�� Requires No External Components
�� Can Be Powered From Data Line. Power Supply Range is 3.0V to 5.5V
�� Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
�� ±0.5°C Accuracy from -10°C to +85°C
�� 9-Bit Thermometer Resolution
�� Converts Temperature in 750ms (max)
�� User-Definable Nonvolatile (NV) Alarm Settings
�� Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside programmed Limits (Temperature Alarm Condition)
�� Applications Include Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, or Any Thermally Sensitive System


WIZ200WEB-EVB Feature :
- Embedded Web Server module having Atmega128 & W5300
- Operates as HTTP Server
- Available of testing digital output (LED & LCD Control), digital input & analogue input through web browser
- Guarantee system stability and reliability by using W5300, the hardwired TCP/IP chip
- Provides Configuration Tool Program for easy configuration and control
- Supports 10/100 Mbps Ethernet
- RoHS Compliant

DC 5V 500mA
2 Slide Switch
Temperature Sensor TC77 -55°C~+125°C
JTAG I/F 2x10 male 2.54mm pin header
ISP I/F 2x3 male 2.54mm pin header (MKII ISP)
Serial I/F UART0 & 1, RS232 Serial Port
LAN Port RJ45 with Transformer (1CT:1CT), 2LED

iRobot Scooba ® 380

iRobot Scooba® 380 Floor Washing Robot Full Specifications:

iRobot's award-winning floor washing robot removes up to 98%* of common household bacteria so floors get reliably with the touch of a button. The Scooba 380 cleans up to 850 square feet or 3-4 rooms on a single battery charge. It navigates throughout each room using a powerful 4-stage cleaning system to prep, wash, scrub and squeegee sealed hardwood, tile and linoleum floors. Scooba uses only clean solution (tap water, water and vinegar or deep cleaning, fresh scented Clorox® Scooba Cleaning Solution) to wash floors. It even cleans beneath cabinet edges, tables, chairs and other hard-to-reach places. Two Virtual Walls mark off-limit areas. Includes 2 Virtual Walls, charging base and storage mat.


4-stage cleaning process:

1. Preps - picks up dirt, sand and crumbs
2. Washes - uses only clean solution to wash floors (mops just spread around dirty water)
3. Scrubs - powerful brush removes dirt, grime and stuck-on messes
4. Dries - squeegee lifts dirty water from floors

Saturday, September 12, 2009

BC-2000 Access Controller

BC-2000 Access Controller

Tech Specs:
  • Exquisite designs with non-masking Metal shell
  • Waterproof and weather resistant functions
  • keystroke backlight
  • Card appliance:125kHz EM cards
  • Reading range:up to 5 cm
  • Application:luxurious office building,bank,Prisons
  • Change Codes 1 master,1000 users & prox cards
  • Door open detection
  • Door relay time 00-99 seconds
  • Alarm time 00-99 minutes
  • Electric Lock
  • External Bell
  • External Push Switch
  • Magnetic Contacts
  • Alarm
  • Non volatile Eeprom memory

Friday, September 11, 2009

BC 6000 RFID acess control

BC 6000 RFID acess control
Multi-functions ,Integrated with pin keyboard ,Chinese read head ,one-door access controller ,
T&A,two-door access controller.
Advanced technology ,steady quality.
Output/input of preventing of static electricity and current impulses, anti-jamming ,and preventing abnormal shut.

Dynamic setting ,flexible applications:
  • 1 built-in card reader(EM or Mifare ),2 sets of W26 output .
  • 2 sets of lock magnet inputs
  • 1 set of interfaces for ring and 1 set of communication interfaces.
  • 1 re-set I/O interface.
Chinese&English menu ,ease in operations , LED Chinese&English menu with backlight ,showing user's name and No Message publicizing functions. It can be set 16 s alarms ,can support workday setting .With choices of on-line or off-line with internet . Expertise makes big functions, Manage 2 doors with w26 output . Capacity:2500 cards , 25,000 records and alarms .A.P.C functions and function of just opening one door at one time .

Support card ,pin ,and card&pin three ways .Support setting emergency entry pin and super pins .
Alarm functions: opening-door overtime ,closing-door overtime, illegal entry alarm, duress alarms .

1 locket Queuing System

1 locket Queuing System

Available option:
  • 2 digits or 3 digits 7 segment display
  • 6cm or 10cm height of 7 segment display
  • remote controller
  • box controller

5V 1 Amp switching Adaptor

5 Volt 1 Ampere switching Adaptor.

general purpose

Single Fiber Arc Fusion Splicer ,Fujikura FSM 60S

Single Fiber FSM 60S Arc Fusion Splicer

Item Specifications:
Applicable fibers :SMF, MMF, DSF, NZDSF etc.
Cladding dia./ Sheathe dia. :80 to 150 mm / 100 to 1000mm
Splice mode :Total 100 modes
Automatic fiber identification :SMF, MMF, NZDSF
Splice loss estimate :Equipped
Attenuation splice :0.1dB to 15dB by 0.1dB step
Splice result storage :Last 2000 splices
Viewing methods :2 axis 2CMOS camera with 4.1” LCD
Tension test :1.96 to 2.25N
Protection sleeve :60mm, 40mm and Fujikura micro sleeves
Diagnostic function :Equipped

Long Range RFID I-CODE SLI Door Gate

The I-CODE SLI door gate , long range RFID reader , ISO 15693

- Inter antenna distance (gate wide) : 60 - 140cm
- human height distance : 120 - 200cm
- anti collision upto 240 tag
- equipped with infra red sensor
- RS-232 interface connected to PC for collect data ( R/W )
- Power supply : 220V AC, 10watt

Tuesday, September 01, 2009

Brightek WH500A serial universal programmer

Brightek WH500A serial universal programmer

The WH-500A superior performance programming summarized as follows:

1. More than 1000 kinds of chips to support the offline copy, covers almost all kinds of chips (including the latest trends in a variety of commonly used chip, such as 87lpc762/764, etc.), and continued to upgrade the service to enjoy! Please keep browsing http://www.whkj.com.cn or http://www.brightek.com.cn

2. Can line of work (research programmer), but also to work independently off-line one-touch (more suitable for mass production using non-professionals), and automatically switch the two modes.

3. Program has a built-4M high reliability electronic disk (data as long as 80 years), the electronic trading data preserved the use of encryption algorithm, and the prohibition of the software read out the calibration operation. Procedures to prevent electronic data disc piracy operators.

4. Copy by setting the number of software counters, when off-line copy number of the provisions of films, the opportunities for self-destruction of electronic copies of the data set. Definitely put an end to the chip with the loss of program data.

5. Electronic disk with the programmer using the internal high-speed parallel bus to transmit data over computer print-mouth communications 20 times faster. Effectively improve the efficiency of chip programmer.

6. Control software to allow users to set up a free copy of the operation, such as the new chip can be erased omitted, all blank check operation, so as to shorten the time to copy and improve efficiency.

7. Cloner parallel to the work of more than than a single programmer to write more efficient and much cheaper prices, and support a wider range of devices. Currently on the market more than a programmer to write parallel structure in general, if a chip which will lead to problems of all the chip programming adapter failure or unreliable, the cloner of parallel low cost structure, but the user will have serious hidden abroad has long been out of the structure of the programmer.

LEGO Mindstorms NXT 2.0 (8547)

Lego Mindstorms NXT is back and better than ever, with new robot models, even more customizable programming, and all-new technology including a color sensor. Mindstorms NXT 2.0 combines the unlimited versatility of the Lego building system with an intelligent microcomputer brick and intuitive drag-and-drop programming software. The new 2.0 toolkit features everything you need to create your first robot in 30 minutes and then tens of thousands of other robotic inventions that do what you want.

Product Features

* The intelligent NXT Lego brick features 32-bit microprocessor, a large matrix display, 4 input and 3 output ports, and Bluetooth and USB communication link; batteries not included
* Three interactive servo motors; four sensors (Ultrasonic Sensor, 2 Touch Sensors and the all-new Color Sensor)
* Color Sensor has triple functionality: Distinguishes colors and light settings, and functions as a lamp
* Easy-to-use software (PC and Mac) with icon-based drag-and-drop programming and 16 fun building and programming challenges; building instructions for 4 new amazing robots
* 612 pieces

AX-12 PIC12F675 microcontroller Activity board

AX-12 , PIC12F675 microcontroller Activity board

Microcontroller unit features :
�� Microchip’s 8-pin PIC microocntroller PIC12F675 on-board
�� 1KWord Program memory
�� 4MHz Internal clock
�� 4-Ch. 10 bit Analog to Digital Converter
�� 128-Byte Internal EEPROM
�� 2 Timer-Counter
�� 6 I/O maximum in Internal clock mode
�� Support In-system programming via Parallel port

Experiment unit features :
�� 3- Push button
�� 8-LED and 1-Digit LED display owrk with Shift register IC, select the display with jumper.
�� Small Stepper motor driver
�� Piezo speaker
�� Analog demonstrated by a variable resistor
�� RS-232 serial port interface
�� Inteface with one wire bus and iButton
�� Use +12V (+18V unload) 500mA
�� Polarity protection.

PX-17V3.0 Parallel port dsPIC/PIC Programmer

Parallel port dsPIC/PIC Programmer

Interface PC’s parallel port. Program target dsPIC/PIC microcontroller with ZIF socket and via ICD jack (compatible ICD2).

Support :
  • PIC10Fxxx (via ICD2 jack)
  • PIC12Cxx,12Fxxx
  • PIC16Cxxx,16Fxxx,
  • PIC18Cxxxx,18Fxxxx,
  • dsPIC30Fxxxx
Includes :
Programmer board with base, Parallel port cable, ICD cable, DC adaptor, CD-ROM and Documentation.