Dekko DAG-203AD Digital Signal Generator

 Dekko DAG-203AD Digital Signal Generator is highly stable multipurpose broad

 bandwidth signal generator, which can directly generates Sine and Square waveforrn with maximum frequency  upto 15MHz. 

Frequency meter function is included for testing internal and external signal up to 30Mz. 

It is a perfect product for electronic circuit and pulse circuit educating or researching. 

Online Order

I. Specifications 

1. Frequency Range: 0.1Hz-15MHz in 7 ranges 

2. Waveform: Sine and Square 

3. Output Amplitude: not less than 20Vp-p (open circuit), not less than 10Vp-p (with 50 Ohm load) 

4. Output Attenuator: 0dB, 20dB, 40dB, 60dB 

5. Rising & Falling Edge of Square: not more than 35ns 

6. Distortion of Sine: less than 1% (10Hz-100KHz) 

7. Frequency Response of Sine: ±0.3dB( ≤100KHz); -3dB ( 100KHz --15MHz) 

8. Frequency Meter: 

a) Measuring Range: 1Hz-30MHz(Max. 30MHz) 

b) Input Impedance: IMΩ/ 20pF 

c) Sensitivity: 100mVrms 

d) Max Input: 150V AC+DC(with attenuator) 

e) Input attenuator: 20dB, 0dB  

f) Measuring Error: not more than 3x0.00001 ±1 digit 

Onlline Order

9. Power Supply 

a) Voltage: AC 220V ± 10% (110V ± 10% Optional) 

b) Frequency: 5011 ± 2Hz 

c) Power Consumption: 25VA 

10. Operating Ambient: 

a) Temperature: 0°C-40°C 

b) Humidity: <RH 90% 

c) Atmospheric Pressure: 86kPa-104kPa 

11. Dimension(mm): 280L x 255W x 100H 

12. Weight: 3kg 

Online Order https://tokopedia.com/rosesana/dekko-dag-203ad-digital-signal-generator

Dekko RF-450 Analog Signal Generator 100KHz to 150MHz and up to 450MHz

Dekko RF-450 Analog Signal Generator 100KHz to 150MHz and up to 450MHz

Introduction 

RF-450 is a RF Signal Generator with frequency range from 100kHz to 150MHz. 

At Range "F" (Press "F* on the front panel), when adjust the frequency knob to its highest,

450 MHz It can be obtained by third harmonic of 150MHz. 

External modulation frequency can be received from 50Hz to 20kHz ‘ While internal modulation frequency fixed at I kHz.

It could teaching, producing and maintaining. And also be used to measure 

The Sweep Linearity of Spectrum Analyzer. 

Online Order

Feature :

1) Wide frequency range: 100kHz— 150MHz 

2) Low distortion of 1 kHz internal signal provide stable 

amplitude-modulated RF output signal. 

3) External input signal can be set between 50Hz-20kHz 

Specifications:

1) Frequency Range: 

A:  100kHz-300kHz 

B: 300kHz-1MHz 

C: 1MHz-3.2MHz 

D: 3MHz- 10MHZ 

E: 10MHz-35MHz 

F: 32MHz-150MHz (The third harmonic of 150MHz to 450MHz) 

2)Frequency accuracy: ± 3% 

3) RF output : more than or equal 100mVrms (when frequency less than or equal 35MHz) 

4) RF output level control: 1mV-100mV (measured at output point) 

5) Internal modulation output signal: > 2mVrms. 1kHz ±2% 

6) External modulation input signal: more tahn or equal 1Vrms. 50Hz-20KHz 

7) Power supply: AC220V ± 10% 50Hz/60Hz 

8) Dimension: 142(W) X 233(D) X 197(H)mm 

9) Weight: Approx. 3.5KG 

Online Order

Functions of front & rear panels 

1) Frequency adjustment knob 

2) Power on indicator 

3) Power switch. Push on. 

4) Level adjustment knob of Internal modulation signal 

5) Input/output selection of Internal & external modulation signal 

6) Frequency selecting sw itches(A-F) 

7) Internal/external modulation signal selection 

8) RF output signal level switch. 

9) RF output

10) Power Socket (AC line)

11) Fuse and rated value 

Online Order : https://tokopedia.com/rosesana/dekko-rf-450-analog-signal-generator-100khz-to-150mhz-and-up-to-450mhz

XG-01 Selenoid Door Lock

XG-01 Selenoid Door Lock Designed with an open frame and and very strong, and easy to apply to making the system

Parameter:
- Voltage: 12VDC
- Current: 1.5A-3A
- Size: 43 * 27mm (L * W)
- Latch telescopic length: 9mm
- Energized forms: intermittent;
- Unlocking time: 1S
- continuously energized 10S;

Hantek HDG2102B, Function / Arbitrary Waveform Generator 100MHz, 2 Channel, 16 Channel Digital Output

HDG2102B is a 2-channel function generator from Hantek with a maximum frequency output of 100 MHz. HDG2102B has 64 MB of memory and a sampling rate of 250 MSa / s. HDG2102B also features a 7 inch LCD to display wafeform and various configuration parameters.

Specification:

- Channel: 2

- Memory: 64MB

- Frequency: 100 MHz

- Sample Rate: 250 MSa / s

- Voltage resolution: 16-bit

- Digital Output: 16 channel output

- Waveform: Sine, Square, Ramp, Pulse, Noise, Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Oat Sine, Lorentz, Dual-Tone, DC

- Power consumption: <60w p="">

- Dimensions: 305 x 100 x 130 mm

- Supports AM, FM, PM, ASK, FSK, PSK and PWM modulation

- TXCO standard timebase, optional OXCO for super high stability

- Equipped with a 7 inch screen, 64K true color TFT display, WVGA (800X480)

- Equipped with a USB Host, USB Device, and LAN interface

Power Energy Meter

Power Energy Meter Is a device used to monitor the power consumption of an electronic device. This tool uses an LCD to display device power consumption as well as using an EU socket / plug.

The following features are offered by this device:

- Using the LCD to facilitate users in reading data displayed by the device.

- Can measure current voltage, power factor, power, KWh, time, date, and electricity expenses.

- Equipped with 7 display modes

- Equipped with an LCD overload warning feature

- Equipped with a 3.6V Ni-MH battery and 2x1.5V battery as a backup battery for the appliance's power supply so that when it is removed from the power socket the data or configuration of the tool is not lost.

Specification:

- Working Voltage: 230 - 250 VAC @ 50 Hz

- Maximum Current: 16 A

- Timer range: 0 seconds - 9999 days

- Current Range: 0 - 16 A

- Frequency Display: 0 Hz - 9999 Hz

- Power display: 0 - 3680 W

- KWh display: 0 - 9999 KWh

- Dimensions: 155 x 73 x 75 mm

Heat Sink CTS APF19-19-13CB/A01

Heat Sink APF.

Specifications:
- Thermal Resistance: 7.05 degree C / Watt
- Thermal Impedance: 0.82 degree C-in2 / W
- Fin Matrix: 12 x 2
- Basic ingredients: Aluminum
- There is adhesive glue to attach Heat sink to IC
- Suitable for ICs with BGA, LGA, CPU, ASIC or IC packs that have flat surface area
- Dimensions: 19 x 19 x 6.3 mm

datasheet http: // zipansion • com / 18dVo

Universal ZIF Socket C40

ZIF Socket for DIP IC
Universal ZIF Socket C40 - ECE (blue color)

Breadboard 400 tie point

Breadboard / project board with a total of 400 holes to install components. Suitable for use as prototyping project tool.

Ball Caster Wheel Compact

Ball Caster Wheel Compact is Holder / mounting for ball-caster with diameter 13.5 mm. Suitable applied as a neutral wheel on mobile robot.

iCLEBO Side brush assy right and left

spare part side brush replacement for iClebo floor cleaning robot (Arte, Omega, Pop). This product consists of a pair of side brush (left and right).

Thermal Pad Bergquist K10 for TO-220 packaging

K10 type Bergquist thermal pad for components with TO-220 packaging. Thermal resistance 0.2degC / W, yellow.

DKM-09 Knob Tactile Switch MTS-1103D blue color

Blue knob for Tactile Switch type MTS-1103D

LEKO ESD Wrist Strap

bracelets that serve to prevent damage to sensitive components such as ICs, transistors, HLDs, etc. due to Electro Static Discharge (ESD) caused by the human body.
Suitable for lab, component production process, electronic device repair process, etc.

KTSC22 Knob round Tactile Switch MTS-1103D blue color

Knob for tactile switch with round shape, blue color

- Diameter: ± 1.3cm
- High button only: ± 6mm
- Overall height: ± 9mm

MTS-1103D Knob Tactile Switch yellow box

Knob yellow color box for tactile switch type MTS-1103D

Amphenol PCB 10x1 pitch 2mm height 4mm gold

Amphenol PCB female 10 pin with pitch 2 mm and height 4 mm.

• Type of Amphenol terminal PCB
• Shape (female / male) Female
• Pitch 2 mm
• Number of pins 10 pins
• Mounting Throug hole

RCA Socket Panel

RCA 3 plug socket panel with 25 x 75 mm panel dimensions. Available in 2 color variations, red yellow and red white and white. Suitable for application on audio video equipment.

• Type of RCA Panel terminal
• Shape (female / male) Female
• Number of pins 3
• Mounting Panel Mount
• Mounting angel Free-hanging

DB9 Connector PCB Female

Female DB9 connector connected to the PCB board.

• DB9 terminal type
• Shape (female / male) Female
• Pitch 2.54mm
• Number of pins 9
• Mounting PCB
• Mounting angel Right Angel
• Metal contact material

DB25 Connector PCB Female

Female DB25 Connector that plugs into PCB board.

• DB25 terminal type
• Shape (female / male) Female
• Pitch 2.54mm
• Number of pins 25
• Mounting PCB
• Mounting angel Right Angel
• Metal contact material

DB25 Connector Cable Male

Male DB25 connector connected by cable.

• DB25 terminal type
• Male (male / female) form
• Pitch 2.54mm
• Number of pins 25
• Mounting Cable
• Mounting angel Straight
• Metal contact material