Tuesday, March 29, 2011

USB STK300 ATmega128 AVR Starter Kit with JTAG ICE

STK300 AVR Starter Kit

AVR Development board with mounted ATmega128L
USB JTAGAVR ICE Tool - see description below
AVRISP-U USB AVR In-System Programmer

WINAVR C Compiler
WINAVR C examples - UART, Keypad, LCD, switches and LEDs
IAR Assembler - command line
AVRStudio4 IDE, Assembler and Simulator
Datasheets, schematics, manual and sample code
Embedded C book on CD
Get Going with...AVR book on CD

AVR Microcontroller Device Support

ATmega64, ATmega128, ATmega1281 and ATmega2561 have board support
Equivalent low voltage (L, V) Parts are supported down to 1.8V
Devices Supported by ISP :-
ATtiny13, ATtiny25, ATtiny26, ATtiny2313, ATtiny45, ATtiny261, ATtiny461, ATtiny84, ATtiny85, ATtiny861
ATtiny24, ATtiny44, ATtiny84 - ISP only
ATmega48, ATmega8, ATmega88, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164P, ATmega165, ATmega168, ATmega169, ATmega32, ATmega325, ATmega324P, ATmega329, ATmega644, ATmega644P, ATmega645, ATmega649, ATmega8515, ATmega8535
ATmega64, ATmega128, ATmega1280, ATmega1281, ATmega169, ATmega2561, ATmega2560, ATmega3250, ATmega3290, ATmega640, ATmega6450, ATmega6490
AT90CAN32, AT90CAN64, AT90CAN128, AT90PWM2/3, AT90PWM316
See STK200ICE for socket support for 8, 20, 28 and 40-pin AVR microcontrollers.

Operating Systems

Win 2000/XP/VISTA/7 (32 and 64-bit)

STK300 AVR Board Details

ATmega128L-8AI Device mounted on daughter board avoids surface mount problems. The ATmega128L operates from 2.7-5.5V and will generally run faster than 8 MHz at higher voltages. If you require a mounted ATmega128-16AI device instead please request a quotation as there may be a small surcharge.
Easy access to all ports
Peripheral support including ADC and 2 RS232 Ports
LCD interface.
3.3V/5V operation
+10 and -10V supplies available for OP-Amp
Brownout circuitry
Real Time Clock support
External Flash RAM support
Switches and LEDs
24C EEPROM socket
JTAG and ISP connectors
Sample mounted ATMega128L device

CD Contents

AVRISP-U USB port AVR programmer software. Easy to use, full Fuse, Lockbit and Bootblock support
AVRStudio Development environment from Atmel. Includes projects, editor, assembler and simulator. This is Atmel software
WINAVR AVR C Compiler with full IDE
Manual, schematics, AVR Datasheets, sample files, circuit examples
JTAGAVR ICE documentation
Books on AVR microcontroller and Embedded C on CD

A real USB port In Circuit Emulator (JTAG ICE) for AVR emulation. It interfaces with Atmel AVR Studio and runs code on your AVR device. Supplied with adapters to contect directly to the port headers on the STK300 board.

The JTAGAVR uses the On-chip Debug features of the newer AVR devices giving exact electrical and code feedback.
Compatible with AVR Studio 4.10 plus
Supported by Win 98, 2000, ME, XP
3 Hardware breakpoints
Step and Break on program change
Debugger and programmer
Supports Assembler or HLL source code debugging
3V to 5V operation
Atmel JTAG interface
Adapters for STK200, STK300 or STK500

JTAG ICE AVR Device Support

ATmega32, ATmega16, ATmega64
ATmega128, ATmega162, ATmega169
ATmega323, AT90CAN128


2 Adapters for STK*00 boards
USB lead
Software CD with datasheets, AVR Studio, C Compiler, books and user documentation