CP2104-F03-GM I/O Controller Interface IC USB to UART bridge 3.3 V
The CP2104 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232/RS-485 designs to USB using a minimum of components and PCB space. The CP2104 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, one-time programmable ROM, and asynchronous serial data bus (UART) with full modem control signals in a compact 4 x 4 mm QFN-24 package (sometimes called “MLF” or “MLP”). No other external USB components are required.
The on-chip one-time programmable ROM may be used to customize the USB Vendor ID, Product ID, Product Description String, Power Descriptor, Device Release Number, Device Serial Number, and GPIO configuration as desired for OEM applications.
Single-Chip USB to UART Data Transfer
Integrated USB transceiver; no external resistors
required
Integrated clock; no external crystal required
Integrated 1024-Byte One-Time Programmable ROM
for customizable product information
On-chip power-on reset circuit
On-chip voltage regulator: 3.45 V output
USB Function Controller
USB Specification 2.0 compliant; full-speed (12 Mbps)
USB Suspend states supported via SUSPEND and
SUSPEND pins
Asynchronous Serial Data BUS (UART)
All handshaking and modem interface signals
Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, mark, space, no parity
Baud rates: 300 bps to 2 Mbits
576 byte receive buffer; 576 byte transmit buffer
Hardware or X-On/X-Off handshaking supported
Four GPIO signals for status and control
Configurable I/O (1.8 V to VDD) using VIO pin
Configurable I/O (VDD to 5 V) using external pull-up
RS-485 mode with bus transceiver control
Virtual COM Port Device Drivers
Works with Existing COM Port PC Applications
Royalty-Free Distribution License
Windows 7®/Vista®/XP®/Server 2003®/2000®
Mac® OS-X
Linux®
USBXpress™ Direct Driver Support
Royalty-Free Distribution License
Windows 7/Vista/XP/Server 2003/2000
Windows CE® 6.0, 5.0, and 4.2
Example Applications
Upgrade of RS-232 legacy devices to USB
Upgrade of RS-485 legacy devices to USB
Cellular phone USB interface cable
PDA USB interface cable
USB to RS-232 serial adapter
Supply Voltage
Self-powered: 3.0 to 3.6 V
USB bus powered: 4.0 to 5.25 V
I/O voltage: 1.8 V to VDD
Package
RoHS-compliant 24-pin QFN (4x4 mm)
Temperature Range: –40 to +85 °C
