DJI Phantom 3 Advanced

DJI Phantom 3 Advanced 

Show off a new view of your world in unprecedented clarity and style. Your Phantom 3 Advanced has a fully integrated camera that shoots 1080p video at up to 60 frames per second and captures 12 megapixel photos. An enhanced sensor gives you greater clarity, lower noise, and better pictures than any previous DRONE flying camera.

Technical Specs:

Aircraft 

• Weight (Including Battery And Propellers) 1280 g 
• Diagonal Size (Including Propellers) 590 mm 
• Max Ascent Speed 5 m/s 
• Max Descent Speed 3 m/s 
• Hover Accuracy •Vertical: +/- 0.1 m (when Vision Positioning is active) or +/- 0.5 m •Horizontal: +/- 1.5 m 
• Max Speed 16 m/s (ATTI mode, no wind) 
• Max Altitude Above Sea Level 6000 m 
• Operating Temperature 0°C to 40°C 
• GPS Model GPS/GLONASS

 Camera 

• Sensor Sony EXMOR 1/2.3”
• Effective pixels: 12.4 M (total pixels: 12.76 M)
• Lens FOV 94° 20 mm (35 mm format equivalent) f/2.8, focus at ∞ 
• ISO Range 100-3200 (video) 100-1600 (photo) 
• Shutter Speed 8s -1/8000s
• Image Max Size 4000 x 3000
• Still Photography Modes •Single Shot •Burst Shooting: 3/5/7 shots •Auto Exposure Bracketing (AEB): 3/5 •Bracketed Frames at 0.7EV Bias •Time-lapse
• Video Recording Modes •FHD: 1920x1080p 24/25/30/48/50/60 •HD: 1280x720p 24/25/30/48/50/60 
• Supported SD Card Types Micro SD Max capacity: 64 GB. Class 10 or UHS-1 rating required 
• Max Bitrate Of Video Storage 40 Mbps 
• Supported File Formats •FAT32/exFAT •Photo: JPEG, DNG •Video: MP4, MOV (MPEG-4 AVC/H.264) 
• Operating Temperature 0°C to 40°C

Gimbal 

• Controllable Range Pitch -90° to +30° 
• Stabilization 3-axis (pitch, roll, yaw) 

Vision Positioning 

• Max Velocity Less than 8 m/s (when 2 m above ground)
• Altitude Range 30 cm-300 cm 
• Operating Range 30 cm-300 cm 
• Operating Environment Surface with clear pattern and adequate lighting (Lux > 15) 

Remote Controller 

• Operating Frequency 2.400 GHz-2.483 GHz
• Max Distance 2000m (outdoors and unobstructed) 
• Video Output Port USB 
• Operating Temperature 0°C- 40°C 
• Battery 6000 mAh LiPo 2S 
• Mobile Device Holder For tablet or phone 
• Receiver Sensitivity (1%PER) -101 dBm ±2 dBm 
• Transmitter Power (EIRP) •FCC: 20 dBm •CE: 16 dBm 
• Working Voltage 1.2 A @7.4 V 

Battery Charger 

• Voltage 17.4 V
• Rated Power •57 W 

Intelligent Flight Battery 

• Capacity 4480 mAh 
• Voltage 15.2 V 
• Battery Type LiPo 4S 
• Energy 68 Wh 
• Net Weight 365 g 
• Max Flight Time Approximately 23 minutes 
• Operating Temperature -10°C to 40°C 
• Max Charging Power 100 W 

App / Live View 

• Mobile App DJI GO 
• EIRP 100mW 
• Live View Working Frequency 2.4GHz ISM 
• Live View Quality 720P @ 30fps (depending on conditions and mobile device) 
• Latency 220ms (depending on conditions and mobile device) 

Required Operating Systems 

•iOS 8.0 or later •Android 4.1.2 or later 

Recommended Devices 

•iOS: iPhone 5s, iPhone 6, iPhone 6 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, and iPad mini 3 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, and iPhone 6 Plus 

•Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Nubia Z7 mini, SONY Z3 EXPERIA, MI 3, MI PAD

The ROBOTIS PLAY 300 DINO Kit

Budget-friendly robot kits that won’t break the bank! ?The ROBOTIS PLAY 300 DINO Kit is a great way to get your children excited about robotics at an early age. ?Your children will get to build up to seven moving dinosaur robots with this kit! ?Each kit comes equipped with over 50 parts and an easy-to-follow assembly manual. Ages 8+.

The PLAY products have different part sizes depending on the model.

- PLAY 300 : uses 6mm grid parts (smaller parts)

- PLAY 600 : uses 12mm grid parts (bigger parts)

ROBOTIS PLAY is theme-based so children can have diverse experience and develop on creativity.

● Includes simple assembly instruction manual

● Includes 1 geared motor (CM-20) with 2-way output

● Downloadable interactive 3D assembly instructions from ROBOPLUS Design app

The ROBOTIS PLAY 600 PETS Kit

Budget-friendly robot kits that won’t break the bank! The ROBOTIS PLAY 600 PETS Kit is a great way to get your children excited about robotics at an early age. Your children will get to build up to seven moving pet robots! Each kit comes equipped with over 50 parts and an easy-to-follow assembly manual. Ages 6+

The PLAY products have different part sizes depending on the model.
- PLAY 300 : uses 6mm grid parts (smaller parts)
- PLAY 600 : uses 12mm grid parts (bigger parts)

ROBOTIS PLAY is theme-based so children can have diverse experience and develop on creativity.

● Includes simple assembly instruction manual

● Includes 1 geared motor (CM-20) with 2-way output

● Downloadable interactive 3D assembly instructions from ROBOPLUS Design app

Weather Shield

 The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.

These Weather Shields utilize the HTU21D humidity, MPL3115A2 barometric pressure, and ALS-PT19 light sensors and relies on the HTU21D and MPL3115A2 Arduino libraries. Each shield comes with two unpopulated RJ11 connector spaces (for optional hook up of rain and wind sensors) and a 6-pin GPS connector (for optional hook up of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built in voltage regulators and signal translators.

Note: The Weather Shield comes as a stand-alone board. Headers, connectors, and additional sensors will need to be purchased separately, check the related items or wish list below!

Note: This shield was designed for the SparkFun Redboard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.

Features:

• Humidity/Temperature Sensor - HTU21D
• Barometric Pressure - MPL3115A2
• Light Sensor - ALS-PT19

Digital Sensor Cable For Arduino (10 Pack)

This cable is a digital sensor cable for Arduino. These cables are made specifically for connecting the I / O expansion shield and sensors. In one package sales, there are 10 pcs cables.

specifications:
- Length: 30 cm.
- The maximum voltage: <50v .="" p="">- The maximum current: <1000 ma.="" p="">- 1 connector to the servo signal and ground power.
- 1 3-pin JST connector.
- For power color red, black and green to signal ground.

BH1750FVI-TR Ambient light sensors

BH1750FVI-TR Ambient light sensors

This component is the ambient light sensor that uses IC BH1750FVI-TR (type 16-bit serial digital output).

These components are widely used for applications related to mobile phone, LCD TV or LCD displays, portable game machines, digital cameras, digital video cameras, and PDAs.

Here are some of its features:

- Interface I2C bus (f / s mode support)

- Response spectrum approaching the human eye response.

- Conversion of light into digital data.

- Having a broad range and high resolution (1-65535 lx).

Product Information

• IC Function: Ambient Light Sensor
• IC Package Type: -
• MSL: MSL 1 - Unlimited
• No. of Pins: 6
• Operating Temperature Max: 85°C
• Operating Temperature Min: -40°C
• Packaging: Cut Tape
• SVHC: To Be Advised
• Supply Voltage Max: 3.6V
• Supply Voltage Min: 2.7V

APPLICATIONS:

• PND (Portable Navigation Device)
• Digital Still Camera
• LED Lighting
• Intercom / Baby Monitor
• Large sized LCD Panel
• Notebook PC
• Mobile Phone
• Netbook
• Digital Video Camera
• Smartphone / Tablet PCs

Digital IR Receiver Module(Arduino Compatible)

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller.
Well, it will be also easy to make your own IR controller using IR transmitter. 

SPECIFICATION

Power Supply:5V
Interface:Digital
Modulate Frequency:38Khz

TETRIX EDUCATION BASE SET 39143

The LEGO simplicity serving a competition equipment? This is what provides the TETRIX range!

Fully compatible LEGO Technics and Lego Mindstorms, this range offers solid metal frames and hardware suitable for the most demanding jobs.

What new challenges and address the robotics competition with serenity, always supported your intelligent NXT LEGO brick!

Characteristics

• Metallic material resistant to robotic creations
• Compatible LEGO Mindstorms LEGO Technics &
• Programming via NXT Intelligent Brick
• Warning: LEGO Mindstorms Education NXT Software 1.1 or later required (not included)

Contents:

• Introductory CD-ROM to the construction and programming of the system TETRIX
• Set TETRIX Construction
• Connectors TETRIX
• Current motor controller continuously HiTechnic
• Servo Controller HiTechnic
• NiMH Rechargeable Battery Pack 12V

TETRIX® MAX Starter Set

TETRIX is a complete design system for students who are serious about engineering.

Featuring heavy-duty, aircraft-grade aluminum elements for construction, powerful drive motors, and expandable capabilities, TETRIX provides the ideal platform for creativity. Whether students want to build a basic square chassis robot base with a remote control or incorporate other electronics (not included) to design a highly specific autonomous robot, this system is unlimited.

Designed to provide one student or a team of students with the hardware to get started on a robotics or other build project, this starter set eliminates the worry that you might miss a needed part to finish the project.

Includes the comprehensive TETRIX Builder's Guide, a 190-page teacher’s resource packed with several model build instructions, safety, resources, challenges, and more (comes printed and on a Windows CD). Includes a TETRIX Base Set, TETRIX DC Motor Speed Controller with Battery Holder, and four-channel R/C Controller. Requires eight AA batteries, sold separately.

Robo Kit Series

Robot Kits are designed for children ages 8 and up. It is thoughtfully created to develop skills and knowledge in robotics. Each kit contains CPU, DC Motors, Sensors and many more to have students build their own robots with bolts and nuts. Programming of the robot is done with Rogic Program, which is developed in GUI environment for easy understanding and enjoyment. The Rogic Program is available on PC, as well as Smartphone and Tablets in Android and iOS. With many options, students can continue their programming excitements everywhere they go.

Students can understand complex programming within the GUI environment in the Rogic Program. It is designed with a flowchart concept, which builds in-depth logical thinking and math skills. 

The Rogic Program will help to control everything from simple functions to complex functions. It also introduces the C-Language, which leads to more professional and technical details of the programming.

Robo Kit 1 is a beginner course of the Robo Kit series, designed to help students learn the basic knowledge of assembling robots, as well as principles of electricity and electronic structure, all in process of making their first robot. Using simply a driver and nuts and bolts, students will have opportunities to build their own robots from scratch. Likewise, Students also can learn about various types of components, such as LEDs, buzzers, DC motors and the basic function of sensors. Besides assembling, students will also be introduced to the GUI Rogic Program. Students will learn easy programming processes and understand concepts of coding and various movements through Rogic Program with PC, Smart Phone, or Tablet.

Robo Kit 2 includes Upgrade Kit 1-2, which allows upgrade from Robo Kit 1. This course introduces more complicated programming of robots with additional parts. Robo Kit 2 includes Servomotors and IR sensors, which introduce more movement and sensibility, limited only by the student's own creativity. Each of the robots includes the ability to program new chips in Rogic Program. Students will find it fun to see more complex programming.

Kit 2 can make total 21 Robots. Kit 2 includes 10 additional robots from Kit 1.

Robo Kit 3 includes Upgrade Kit 2-3, which allows upgrade from Robo Kit 2. At this level, students will be introduced to a high speed DC motor along with more sensors. In this course, students can coordinate fancy robots with accessories to compete in class or at home.

Kit 3 can make total 31 Robots.Kit 3 includes additional 21 Robots from Kit 1 & Kit 2.

Robo Kit 4 includes Upgrade Kit 3-4, which allows upgrade from Robo Kit 3. In this course, students will be introduced to assembly and driving of a more complicated structure by using the interface board, which supports longer power. With extra servomotors and parts, students can also program more complex and exciting motions for the robot. Robo Kit 4 includes more missions in each chapter as well as more complex programming through Rogic.

Kit 4 can make total 39 Robots.Kit 4 includes additional 31 Robots from Kit 1, Kit 2 & Kit 3.

Robo Kit 5 includes Upgrade Kit 4-5, which allows upgrade from Robo Kit 4. In this course, students will be introduced Bluetooth technology. The Bluetooth module will help wireless communication in a short distance between robot and students. Students will learn the difference between IR communication and Bluetooth. Using Bluetooth Chip in the Rogic Program, Students will be able to control their own robot from distance.

Kit 5 can make total 47 Robots.Kit 5 includes additional 39 Robots from Kit 1, Kit 2, Kit 3 & Kit 4.

Robo Kit 6 includes Upgrade Kit 5-6, which allows upgrade from Robo Kit 5. In this course, students will use all previous programming skills and parts at a professional level. Students can study a more complicated program that is necessary to control the robot in-depth. More accessories will help to create more robust robots and allow students to compete with family and friends to see which robot has more programs to complete their missions first.

Kit 6 can make total 52 Robots. Kit 6 includes additional 47 Robots from Kit 1, Kit 2, Kit 3, Kit 4 & Kit 5.

Upgrade kit is designed for flexibility of students who already have Robo Kit 1 to move on to the next level. Upgrade Kit consists of additional parts that are required in the next level of Robo Kit series. Currently, Robo Kit upgrades are 1-2, 2-3, 3-4, 4-5 and 5-6. All upgrade kits include textbook for the next level.

If you have Robo Kit 1

With Upgrade Kit 1-2, you can create 11 more robots

If you have Robo Kit 2

With Upgrade Kit 2-3, you can create 11 more robots

If you have Robo Kit 3

With Upgrade Kit 3-4, you can create 11 more robots

If you have Robo Kit 4

With Upgrade Kit 4-5, you can create 8 more robots

If you have Robo Kit 5

With Upgrade Kit 5-6, you can create 8 more robots

Purchasing of Upgrade Kit will help students with Robo Kit 1 to move up to the next level without re-purchasing Kits they already have.