Tuesday, April 12, 2016

100MHz analog Oscilloscope VOS-6100

100MHz analog Oscilloscope VOS-6100

Features : 
❑ 100MHz Bandwidth. Dual Channel. Delayed Sweep
❑ Built-In 6 Digit Universal Counter
❑ 10 Sets Memory for Front Panel Setting Save Recall
❑ Time Base Auto-range
❑ Cursor Readout with 7 Measurements
❑ Panel Setup Lock of Digital-Control Functions
❑ Buzzer Alarm
❑ LED Indicators
❑ TV Synchronization
❑ Trigger Signal Output
❑ Z-Axis Modulation Input
❑ SMD Technology, High Stability and Reliability

❑ Cursor measurement system
Cursor measurement function : A T, 1/ A T, A V ; P ( t,v )
Cursor Readout Function
Cursor resolution : 1 / 25 DIV
Effective cursor Rang Vertical :* 3div : Horizontal : * 4div
Panel setting : Vertical : V/DIV, AC/DC/GND, CH1, CH2, INV,ALT,
CHOP, ADD : Horizontal : TIME/DIV, x 1/x 10 ),>:-Y

❑ Horizontal System
Horizontal Modes : MAN ( A ), ALT, DELAY ( B )
A ( main 1 Sweep Time : 50nS 0.55/DIV, continrously variable ( UNCAL )
B ( delay ) Sweep Tine : 50nS 50mS/DIV
Accuracy : ±3 % (f 5% at x 10MAG )
Sweep Magnification : x10 ( maximum sweep time 5nS/DIV )
Hold OFF time : Variable
Delay Time 1 uS - 5S
Delay Jitter : 1/20000 or less
Alternatr Separation : Variable

❑ X-Y MODE
Sensitivity : X-axis. Y-axis selectable
X-axis : CH1, CH2 -4 2mV 5V/DIV ± 3%
Y-axis:CH1. CH2 - 2mV 5V/DIV ± 3%
EXT a 0.1V/DIV ± 5%
X-axis Bandwidth : DC - 500KHz ( -3dB )
Phase Error : 3' or less at DC - 50KHz

❑ CURSOR READOUT FUNCTION
Cursor measurement function : A V, A V%, A VdB, A T, 1/ A T. A T%,
Cursor Resolution : 1 /100 DIV
Effective Cursor Range : Vertical : ± 3DIV, horizontal : ±4 DIV
Panel setting : Vertical : V/DIV ( CH1. CH2) . UNCAL. ADD. P10. AC/DC/GND
Horizontal : S/DIV ( MTB. DTB ). UNCALx Delay time Hold-off
Trigger : Source. Coupling. Slope, Level. 1-4
Others : X-Y, LOCK. SAVE / RECALL. MEM 0-9

❑ CRT
Type : 6-inch rectangular type with internal graticule 0%. 10%. 90% and 100%
markers. 8x 10DIV (1 DIV = 1 cm )
Phosphor : P31
Accelerating Potential : 16KV approx
Illumination :Continuous adjustable

❑ VERTICAL DEFLECTION SYSTEM
Sensitivity : 2mV 5V/DIV, 11 step in 1-2-5 sequence
Sensitivity Accuracy : 3% ( 5DIV : at the center display )
Vernier Vertical Sensitivity : Continuously variable to 1 / 2.5 or less than panel-indicated value
Frequency Bandwidth ( -3dE ) : DC - 100MHz ( 2mV/DIV : DC - 20MHz )
Rise Time : 3.5ns ( 2mV/DIV : 17.5ns )
Signal Delay : Leading edge can be monitored
Maximum Input Voltage : 400V ( DC + AC) at 1 KHz or less
Input Impedance mo. ± 2% // 25pF approx
Vertical Modes : CH1, CH2. DUAL ( CHOP /ALT ), ADD ( DIFF mode can be established when the CH2 is in the INV mode )
CHOP Repetition Frequency : Approx. 250KHz
Polarity ( INV) : CH2 only
Bandwidth Limited : 20MHz
Common-mode Rejection Ration : 50:1 or better at 50 KHz

❑TRIGGER SYSTEM
Trigger Modes AUTO, NORM, TV
Trigger Source : CH1, CH2. LINE. EXT
Trigger Coupling : AC, DC. HER, LFR
Trigger Slope : + / - polarity or TV sync polarity
Trigger Sensitivity : AUTO : 10Hz 20MHz. 0.35DIV 50mVpp ( 20MHz - 100MHz ) 1.5DIV. 150mVpp
NORM : DC 20MHz. 0 35DIV. 501-riVpp ( 20MHz-100MHz ) 1.51)IV. 150mVpp
TV : Sync signal , 1 DIV . 200mVpp
Trigger Level Range : INT : ±4DIV or more EXT :± 0.4V or more
TV Sync : TV-V. TV-H
Max. External Input Voltage : 400V ( DC + AC peak ) at 1 kHz
External lnput Impedance : 1 MO ± 5% // 25pF approx

❑ Z - AXIS INPUT
External intensity modulation
Coupling : DC
Voltage : 5V or more
Maximum Input Voltage : 30V ( DC + AC peak ) at 1 kHz or less
Bandwidth : DC - 5MHz

❑ TRIGGER SIGNAL OUTPUT
Voltage : 25mV/DIV approx. in 500 termination
Frequency Response : DC - 10MHz
Output Impedance - 500 approx

❑ CALIBRATION OUTPUT
Waveform :1 kHz ± 5%, square wave
Voltage : 2Vpp ± 2%
Impedance 2k0 approx

❑ SPECIAL FUNCTION
TIME / DIV Auto Range ( MOS-6103 / 6061 / 6060 ) : Provided
Panel Setting Save Recall ( MOS-6103 / 6061 / 6060): 10 set
Panel Setups Lock Provided