Tuesday, May 31, 2011

phyCORE®-i.MX31 Rapid Development Kit

phyCORE®-i.MX31
Rapid Development Kit 

The phyCORE-i.MX31 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-i.MX31 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module is at the core of our Rapid Development Kits. Once programmed, the phyCORE module can be removed from the Carrier Board and inserted like a "big chip" into test beds, prototypes, and production units for OEM deployment, making full use of its modularity and compact form factor.

phyCORE-i.MX31 modules are available in a variety of Rapid Development Kits that offer true rapid development solutions by providing all the necessary ingredients to jump start embedded designs. The kits include the phyCORE-i.MX31 SOM and Carrier Board, LCD, pre-installed Windows Embedded CE 6.0 or Linux OS demo image, complete electronic documentation, access to schematics, demo applications, and third party industry-standard C compilers and embedded development environments for evaluation.

PHYTEC also backs up our kits with a Start-Up Guarantee. We invite you to make use of our free technical support until any start-up problem you might encounter is solved. The positive out-of-box experience with the Rapid Development Kit illustrates PHYTEC's continuous commitment to providing customers with effective embedded solutions by offering a hands-on, industry-centric entry point for embedded developments, which is a key starting point for OEMs needing to have a complete solution up and running under very short development time constraints.

The phyCORE-ARM11/i.MX31 module, combined with the PHYTEC phyCORE-ARM11/i.MX31 Carrier Board, provides an excellent platform to jump start embedded designs and propel concept to prototype and finished product. 

Carrier Board Technical Features
  • Molex high density SlimStack interconnect for mating with phyCORE-i.MX31 Module
  • Power supply input receptacle for unregulated 5V input .
  • Connector for PHYTEC LCD adapter board (LCD-004 supports Sharp LQ035Q7DH06)
  • GPIO-Expansion board connector - provides all signals from module to user port
  • RJ-45 Ethernet connector with transformer for 100/10 MBit/s
  • USB Host standard-A socket
  • USB OTG connector
  • Compact Flash card socket
  • SD/MMC card socket
  • Two DB-9 sockets for RS-232 interfaces
  • DB-9 socket for CAN
  • CAN controller NXP SJA1000T
  • AC97 audio/touch controller (Wolfson WM9713L) (microphone, speaker, line in, line out)
  • Power- ON/OFF buttons
  • System reset button
  • Power LEDs
  • One wire connector, RJ12
  • Camera ZIF connector and pin header
  • Interface for matrix keyboard
  • Power-over-Ethernet option
  • Lithium cell connector
  • JTAG interface
Available in:
Linux Rapid Development Kit (KPCM-037-Linux)
WinCE Rapid Development Kit (KPCM-037-WinCE)