Tuesday, February 15, 2011

ISO-U2-P1-O2 isolated voltage to current converter

ISO-U2-P1-O2 voltage to current converter
ISO series DC voltage isolated amplifier is a kind of IC that can convert DC voltage to output current or voltage that according to comparison with no relationship with load. It’s widely used in Electric power, distant control, instrument, medical instrument, and industrial control industries.

This photoelectricity isolation is with good anti-jamming capability Efficiency grade0.1, 0.2, 0.5 ,0-10mA/0-20mA/4-20mA isolated signal of international standard signal input and output.Output  voltage signal: 0-5V/0-10V/1-5V;Output current signal0-10mA/0-20mA/4-20mA.With high load capability. Extremely high linearity in whole process (nonlinearity < 2%).

General characteristic:
● Low cost,small size,SIP 12 anti- fire UL94V-0 package
● Can adjust “Zero”and “Gain”
● Three-port (power/input/output) isolation:3000VDC
● Assistant power:5VDC/12VDC/15VDC/24VDC
●0-5V/0-10V/0-±100mV/voltage signal or 0-10mA/0-20mA/4-20mA/ current signal isolation and transfer
● Temperature range: -45~+85 ℃
● with good anti-jamming EMC and high frequency signal capability 

● DC current/voltage signal isolated/transfer/amplifier
● No distortion in long distance signal transmission 
● Analog signal data acquisition 
● 0-20mA/0-5V signal isolation and transfer
● Equipment and sensor signal acquisition
● Signal transmit no-distortion
● Electric power,distant control,isolated safe bar 
● 4-20mA sensor analog signal transmission
● Ground interference control

Related Product:
ISO-U1-P3-O1  = isolated voltage 0-5V to current 4-20mA Converter
ISO-U2-P3-O4 = isolated voltage 0-10V to voltage 0-5V Converter
ISO-A4-P3-O4 = isolated current 4-20mA to voltage 0-5V Converter
ISO-Z1-W5-P3-O4 = isolated thermal resistance to voltage converter

U1 = Voltage 0-5V
U2 =  Voltage 0-10V
U3 = Voltage 0-75mV
U4 = Voltage 0-2.5V
U5 = User Defined Voltage

P1 = Power Supply 24VDC
P2 = Power Supply 12VDC
P3 = Power Supply 5VDC
P4 = Power Supply 15VDC
P5= User Defined Power Supply

O1= output 4-20mA
O2= output 0-20mA
O3= output 4-12-20mA

O4= output 0-5V
O5= output 0-10V
O6= output 1-5V
O7= Used Defined output