Adjustable Infrared Sensor Switch

Adjustable Infrared Sensor Switch

The module receiving and sending infrared signals (can not for data communication).

specifications:

- Power Supply: 5VDC

- Based photoelectric sensors that can be used as a sender or receiver of infrared signals

- Proximity sensor detection buffer set of 3cm - 80cm

- Has a data output: digital voltage

- Suitable for robotics applications, such as: avoiding objects, interactive media, etc.

- Can be connected to various types of microcontrollers.

- Equipment: sensor module + data cable.

HF-LPB100-0 UART To Wi-Fi with External Antenna

HF-LPB100-0 is wifi module that provides a wireless interface to the device - a device that has a serial interface / SPI. HF-LPB100-0 is powered by CPU-based Cotex-M3 (MC101) and MediaTek Wi-Fi MT5931SA. The wifi module uses standard IEEE802.11b / g / n and is integrated with the MAC, baseband processor and RF transceiver.

features:

- Supports IEEE802.11b wireless network standards / g / n

- Low power consumption

- Supports UART interface, SPI, PWM and GPIO

- Supports IPv4 network protocol, TCP / UDP / HTTP

- Support the working mode STA / AP / AP + STA

- Supporting the Smart Link

- Support the renewal wireless / remote firmware

- Support WPS function

- Supports Multi-TCP Client up to 5 applications

- Supports internal antenna or an external antenna

- Certified FCC / CE / TELEC

• Power supply 2.8 - 3.6V
• Data rate of 11-54 Mbps
• Working frequency 2.4 GHz
• UART, SPI, PWM and GPIO

MSP-EXP430G2 development Kit

MSP430 Value Line LaunchPad development kit (MSP-EXP430G2) is a board-based IC developer MSP430G2553 16-bit microcontroller that can function as a device programming and debugging. This product is equipped with 20 DIP socket that has been integrated to accelerate the process of programming and debugging on the MSP430 through a 2-wire JTAG protocol. This product is also equipped with flash memory that can be programmed or erased in a matter of seconds.

This product can be programmed via the PC operating system Windows, MacOS, and Linux using a software called Code Composer Studio Version 4 or can also use the IAR Embedded Workbench.

specifications:

- Microcontroller: MSP430G2553

- Flash memory: 16 Kb

- RAM: 512 bytes

- Clock Speed: 16 MHz

- Baud Rate: 9600

- ADC: 10-bit

- Speed of crystal: 32,768 KHz

- Interface: USB, UART

HDMI cable (male) to VGA (male) with a 5 meter long cable and gold connectors.

HDMI cable (male) to VGA (male) with a 5 meter long cable and gold connectors.

• No power supply requires an external power supply
• Interface or HDMI and VGA ports
• Converter HDMI to VGA
• 5 meter cable length

BT-410 (Slave)

BT-410 is a bluetooth module (slave) made Robotis that is perfect when applied to the field of robotics. BT-410 is equipped with a technology called Near Field Technology (NFC) technology to track serial communication (UART). BT-410 is also compatible with Android smartphones and iOS operating bersitem.

• 3.3V power supply
• Working frequency 2.4 GHz ISM Band
• UART interface
• Bluetooth 4.0 Low Energy class
• Distance outreach of 10 meters

Non-contact Liquid Level Switch

This is the height of the water level detection sensor manifold contactless (without direct contact with the object). How the sensor that this is only need be attached to the outer surface of the liquid container (non-metallic). These sensors will function as a switch ketrika height of the water level is below the sensor that position.
These sensors are highly sensitive and stable with output currents up to 100mA.

specifications:
- Supply voltage: 5V
- Workflow: 25μA
- Output Current: 100mA (max)
- Working temperature: -25 ~ 125?
- Limit Wall thickness: 1 ~ 13mm
- Dimensions: 16.5 x 8.5 x 5.5 mm
- Cable length: 30 cm

GMX023 DC Gear Motor 3-12V, 1:120, 100rpm, Offset Shaft

GMX023 3-12V DC Gear Motor, 1: 120, 100rpm, Offset Shaft

• Working voltage of 3-12 VDC
• Current consumption without load 200m A
• The current consumption of 2.3 A
• Torque maksumum 3 kg.cm
• Maximum rotary speed of 100 rpm
• Shape and size of the shaft offset
• Gear box Yes
• Comparison gear box 1: 120

GMX022 3-12V DC Gear Motor, 1: 120, 100rpm, 90 Degree Shaft

GMX022 3-12V DC Gear Motor, 1: 120, 100rpm, 90 Degree Shaft

• Working voltage of 3-12 VDC
• Current consumption without load 200m A
• The current consumption of 2.3 A
• Torque maksumum 3 kg.cm
• Maximum rotary speed of 100 rpm
• The shape and size of shafts 90 deg
• Gear box Yes
• Comparison gear box 1: 120

GMX018 3-12V DC Gear Motor, 1: 120, 180rpm, 90 Degree Shaft

GMX018 3-12V DC Gear Motor, 1: 120, 180rpm, 90 Degree Shaft

• The working voltage 3 - 12VDC
• Current consumption without load 40 - 180mA
• Torque maksumum 5 kg.cm
• Maximum rotary speed of 180 rpm
• The shape and size of shafts 90 deg
• Gear box Yes
• Comparison gear box 1: 120

Pure Copper Heatsink For Raspberry Pi with self adhesive

This product is a heat sink (heat sink) small made of pure copper that effectively improve the heat dissipation. The optimized heat sink to absorb heat from the component - electronic component-type surface-mount (SMD) such as stepper motor driver or CPU on the Raspberry Pi.