MPX5050GP Pressure sensor with temperature compensation, signal conditioning, and has been calibrated.

The MPXx5050 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

Features

· 2.5% Maximum Error over 0° to 85°C

· Ideally suited for Microprocessor or Microcontroller-Based Systems

· Temperature Compensated Over -40° to +125°C

· Patented Silicon Shear Stress Strain Gauge

· Durable Epoxy Unibody Element

· Easy-to-Use Chip Carrier Option

Specs:
- Power Supply : 5 VDC, 7mA typ.
- Ported elements, gauge.
- Pressure range : 0-50 kPa.
- Sensitivity : 90 mV/kPa.
- Response time : 1 ms.
- Error : 2,5% max.

MPX5050D Pressure sensor with temperature compensation, signal conditioning, and has been calibrated.

MPX5050D Pressure sensor with temperature compensation, signal conditioning, and has been calibrated.

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated.

The MPXx5050 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

Features

· 2.5% Maximum Error over 0° to 85°C

· Ideally suited for Microprocessor or Microcontroller-Based Systems

· Temperature Compensated Over -40° to +125°C

· Patented Silicon Shear Stress Strain Gauge

· Durable Epoxy Unibody Element

· Easy-to-Use Chip Carrier Option

Specs:
- Power Supply : 5 VDC, 7mA typ.
- Basic elements, differential.
- Pressure range : 0-50 kPa.
- Sensitivity : 90 mV/kPa.
- Response time : 1 ms.
- Error : 2,5% max.

MPX2050DP Pressure Sensor, 10V, 0/50kPa, Sensor 4, Dual Port, Tray

The MPX2050 series devices are silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output, directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation.

Features

• Temperature Compensated Over 0°C to +85°C 
• Unique Silicon Shear Stress Strain Gauge
• Easy to Use Chip Carrier Package Options
• Ratiometric to Supply Voltage
• Differential and Gauge Options 
• ±0.25% Linearity

Specs
- Type : Gauge Configurations, Dual Port
- Power Supply : 16VDC (Maks)
- Pressure Range : 0 - 50kPa
- Full scale span : 0,8mV
- Sensitivity : 0,4mV/kPa

Application Examples

• Pump/Motor Controllers
• Robotics
• Level Indicators
• Medical Diagnostics
• Pressure Switching
• Non-Invasive Blood Pressure

MPX2050D Pressure Sensor, 10V, 0/50kPa, Sensor 4, Tray

MPX2050D 50 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors

The MPX2050 series devices are silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output, directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation.

Features

• Temperature Compensated Over 0°C to +85°C 
• Unique Silicon Shear Stress Strain Gauge
• Easy to Use Chip Carrier Package Options
• Ratiometric to Supply Voltage
• Differential and Gauge Options 
• ±0.25% Linearity

Specs:
- Power Supply : 10 VDC, 6mA typical
- Basic elements, differential.
- Pressure range : 0- 50 kPa.
- Differential voltage output.
- Sensitivity : 0,8 mV/kPa.
- Response time : 1 ms.
- Linearity : +/-0,25%.

Application Examples

• Pump/Motor Controllers
• Robotics
• Level Indicators
• Medical Diagnostics
• Pressure Switching
• Non-Invasive Blood Pressure

MS6500 Digital Thermometer

MS6500 Digital Thermometer

Features:
· The maximum number of display 1999, character height 13mm
· K-type thermocouple
· Data Retention

Technical indicators:
· Resolution: 1 ℃, 1 ℉
· Celsius: -50 ~ -40 ℃ ± 6 ℃, -39 ~ -20 ℃ ± 5 ℃
              -19 ~ 0 ℃ ± 3 ℃, 0 ~ 500 ℃ ± 0.75%
               501 ~ 750 ℃ ​​± 1%
· F: -58 ~ -4 ℉ ± 7 ℉, -3 ~ -32 ℉ ± 4 ℉
              32 ~ 932 ℉ ± 2 ℉, 933 ~ 1382 ℉ ± 1 ℉
· Battery: 6F22 (9V) × 1
* Dimensions: 125.5 × 72 × 27mm
· Weight: about 145g (with battery)

MS6450 ULTRASONIC DISTANCE METER

MS6450 ULTRASONIC DISTANCE METER

Features:

• Measurement range: 0.6m~ 15m (2’~50’)
• Accuracy: ±(0.5%+1)
• Resolution: 0.01m/1"
• m/feet unit selection
• Area & Volume calculating
• Laser pointer
• Display backlight

MS6310 COMBUSTIBLE GAS DETECTOR

MS6310 COMBUSTIBLE GAS DETECTOR

Features:

• Easy to identify and pinpoint gas leaks
• Portable and high sensitivity
• Alarm at 10% ~ 40% Level
• Resume original measurement state in 7~ 10 minutes in pure air
• Gas detected: natural gas, methane, ethane, propane, butane, acetone, alcohol, ammonia, steam, carbon monoxide, gasoline, jet fuel, hydrogen
• solvents, lacquer thinner, naphtha
• Warming up time: 2 minutes
• Response time: 2 seconds

Specification：

Easy to identify and pinpoint gas leaks

Portable and high sensitivity

Alarm at 10% ~ 40% Level

Resume original measurement state in 7~ 10 minutes in pure air

Gas detected: natural gas, methane, ethane, propane, butane, acetone, alcohol, ammonia, steam, carbon monoxide, gasoline, jet fuel, hydrogen solvents, lacquer thinner, naphtha

Warming up time: 2 minutes

Response time: 2 seconds

NXP LPC-H2214

NXP LPC-H2214
HEADER BOARD FOR LPC2214 ARM7TDMI-S MICROCONTROLLER WITH 1MB SRAM AND 1MB FLASH MEMORY


FEATURES

• MCU: LPC2214 16/32 bit ARM7TDMI-S™t with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• 1MB (256Kx32bit) 12 ns 71V416 SRAM
• 1MB (512Kx16bit) 55ns MX26LV800BTC FLASH or 70 ns ES29LV800EB FLASH
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB to RS232 convertor, board can take power only from USB port
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• Optional single power supply: +5VDC required if not connected to USB port
• Power supply and status LED
• Power supply filtering capacitor
• Slide switch for ICSP-RUN mode
• Slide switch for Boot mode from external internal flash
• RESET circuit with exterman control of Philips ISP utility via USB-RS232 virtual port
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• Removable crystal on socket (default 14.7456 Mhz crystal installed)
• Extension headers for all uC ports with IDC34 connectors (easy obtainable as used for HDD and Floppy on all PCs)
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print

NXP LPC-H2148

NXP LPC-H2148
PROTOTYPE HEADER BOARD FOR LPC2148 ARM7TDMI-S MICROCONTROLLER

FEATURES

• MCU: LPC2148 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 42K Bytes RAM, USB 2.0, RTC, 10 bit ADC 2.44 uS, 2x UARTs, 2x I2C, SPI, 2x 32bit TIMERS, 6x PWM, 8x CCR, 1x DAC, WDT, 5V tolerant I/O, up to 60MHz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Perfect solution for developing USB peripherials
• USB connector, USB link LED
• Status LED
• Power supply LED
• On board voltage regulator 3.3V with up to 800mA current
• Single power supply: takes power from USB or extension socket pin
• Power supply LED
• Power supply filtering capacitor
• RESET circuit
• RESET button
• 12 Mhz crystal on socket
• 32768 Hz crystal and RTC backup battery connector
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 110 x 100 mm (4.3 x 3.9 ")
• Distance between the Extension headers: 25.4 mm (1")

NXP LPC-H2138

NXP LPC-H2138
HEADER BOARD FOR LPC2138 ARM7TDMI-S MICROCONTROLLER

FEATURES

• MCU: LPC2138 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 32K Bytes RAM, RTC, 8x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• On board voltage regulator 3.3V with up to 800mA current
• Single power supply: 6V AC or DC required
• Power supply LED
• Status LED
• Power supply filtering capacitor
• Two channel RS232 interface
• RESET circuit with exterman control of Philips ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 14.7456 Mhz crystal on socket, allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
• 32768 Hz crystal and RTC backup battery connector
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 76x55 mm (3.0x2.2")
• Space between the pin rows: 48.26 mm (1.9")