XB24-AWI-001 802.15.4 zigbee module

XB24-AWI-001 XBee module with 802.15.4 protocol with the data that has a range of data communication distance up to 30m (1mW output power) by using the antenna cable.

Specification:

• Interface: Serial TTL
• Data rate: 250kbps (RF), 115.2 kbps (serial)
• Modulation: DSSS
• Outreach: 30 m (indoor), 90m (outdoor)
• Frequency 2.4GHz
• Data Rate - Maximum 250kbps
• Modulation or Protocol 802.15.4
• Applications Home/Building Automation, Industrial Control, ZigBee™
• Power - Output 0dBm
• Sensitivity -92dBm
• Voltage - Supply 2.8 V ~ 3.4 V
• Current - Receiving 50mA
• Current - Transmitting 45mA
• Data Interface PCB, Through Hole
• Memory Size -
• Antenna Connector On-Board, Wire Antenna
• Operating Temperature -40°C ~ 85°C

XB24-WFSIT-001 Wifi Xbee

XBee RF Module with 802.11 a data protocol that allows XBee module is connected to the Access Point (AP) or commonly called WiFi.

Tech Specs:

• Manufacturer: Digi International 
• Frequency Band: 2.4 GHz 
• Data Rate: 1 Mbps to 65 Mbps 
• Sensitivity: - 72 dBm to - 97 dBm 
• Operating Supply Voltage: 3.1 V to 3.6 V 
• Supply Current Transmitting: 260 mA 
• Supply Current Receiving: 140 mA 
• Output Power: 14 dBm to 16 dBm 
• Antenna Connector Type: RP-SMA 
• Maximum Operating Temperature: + 85 C 
• Dimensions: 32.94 mm x 24.38 mm 
• Interface Type: Wi-Fi 
• Minimum Operating Temperature: - 40 C

ISO 4-20mA-P 4-20mA Dual Loop Signal Isolation Regulator

ISO 4-20mA-P 4-20mA Dual Loop Signal Isolation Regulator

ISO 4-20mA Current Loop Isolation Interface IC provides signal receive and transmittal on a single chip. The ceramic hermetic hybrid package contains an electromagnetic coupled converter and current modulate. The very low input equivalent impendence allows the input voltage can be up to an ultra-wide range (7.5V~32V), so that it is able to meet the requirements for no distortion in long-distance signal transmission under the circumstance of no outside connecting power. The internal ceramic PCB, printed impendence and new isolation technologies allow the IC for the 3KVAC insulated voltage and meets the industrial level for the extremely poor temperature, humidity and shaking conditions.

FEATURE：

· No external instrument needed for power supply

· （6—24V）Wide range of input voltage,low input impandence

· 4-20mA high accuracy(0.2,0.3,0.5)

· High linearity(Nonlinearity<0 .2="" div="">

· Low cost, small size, standard SIP12 package

· 4-20mA signal input/Output, 3000VAC isolated voltage

· Industrial temperature(-45—+85 ℃）

· Frequency response(small signal bandwidth):50Hz

APPLICATION：

·PLC,DCS analog signal data acquisition and isolation

·Industrial process 4-20mA signal isolation

·Ground-loop elimination

·No distortion in long distance signal transmission

·Instrument signal acquisition

·Electric supervision , medical application and Isolated safe bar

Arduino ProtoShield - Bare PCB

the ProtoShield mates with an Arduino development board and gives the user a small soldering area, two general LED footprints, access to a BlueSMiRF socket, a general pushbutton switch footprint, and most important of all - the Arduino reset switch is brought to the top level.

Now you don't need to buy the whole ProtoShield kit if you just need a piece of prototyping board that will fit on top of your Arduino. You might want to grab a stackable header kit, though, which you can find in the related items below.

MPXA6115A6U pressure sensor

The Freescale MPXA6115A6U pressure sensor Air pressure sensor module that has a pressure range of 15 - 115kpa. Sensor module is also equipped with a string of signal conditioning IC, op-amp output and results have dikomponsasi with temperature.

specifications:
- Power supply: 5VDC
- Range of pressure: 15-115 kPa (2.2 to 16.7 psi)
- Output: analog voltage 0.2 VDC - 4.7 VDC
- Single port
- Type of pressure: absolute (measurement results are ditambahan atmospheric pressure).

Hamamatsu C10423 UVTRON Drive Circuit

Hamamatsu C10423 UVTRON Drive Circuit. This drive circuit is made to drive a Hamamatsu R9454 Flame Detector. The driver circuit uses little energy (~4 mA typically) and contains all the necessary high voltage electronics, drive circuitry, noise canceling, and signal processing needed when using the detector.

A flame sensor is recommended to be interfaced with the driver circuit.

Features
Operates as high-sensitivity UV sensor (flame detector) when used in conjunction with a UVtron R9454
Can detect an open flame of approximate size 25 mm (1 in) in length at 5 m (16.40 ft)
Accepts a wide range of input voltages from 12 V to 24 V
Internal noise reduction circuitry minimizes false positives

FREESCALE SEMICONDUCTOR - MPX5100AP - IC, SENSOR, ABS PRESS 16.68 PSI

FREESCALE SEMICONDUCTOR - MPX5100AP - IC, SENSOR, ABS PRESS 16.68 PSI

Air pressure sensor module that has been equipped with signal conditioning, temperature compensated and calibrated.

specifications:
- Power supply: 5VDC
- Range of pressure: 0 - 100kPa (0 to 14.5 psi)
- Output voltage: 0.2 VDC - 4.7 VDC
- Single Port
- Type of measurement: Absolute (measurement results are ditambahan atmospheric pressure).
- Response time: 1ms

SFM5020-OP fingerprint module

The SFM5000 series is the latest UniFinger module equipped with world’s leading fingerprint authentication algorithm, which ranked No. 1 in FVC2004, 2006 and onGoing. The SFM5000 series features powerful 533MHz DSP, optimized for performance while minimizing power consumption.

- Optical fingerprint sensor 

- 500 dpi resolution 

- Solid sensor surface 

- High quality fingerprint image

Features:

• Powerful 533 MHz DSP
• Improved enrollment & identification speed
• Highly configurable I/O signals
• Fast power-on time
• Fingerprint data encryption

Specification:  CPU  533 MHz DSP  Flash memory  1 MB (extendible up to 4 MB upon request)  EER  < 0.1%  Enrollment time  600 msec  1:1 Verification time  600 msec  1:1000 identification time *  760 msec  Template size  256 ~ 384 Bytes (configurable, 384 Bytes default)  Template standard   ISO19794-2, ANSI-378  Template capacity  1,900 at 1 MB flash (9,500 at 4 MB flash)  Host communication  Asynchronous serial, CMOS level (3.3V) 9600/19200/38400/57600/115200 bps  External I/O  8 ports, configurable digital I/O. Easy to program custom configuration of I/O events and signal patterns  Encryption  256 bit AES (fingerprint data protection)  Supply voltage  3.3 Vdc regulated  Size  55 x 40 x 8 mm (L x W x H)  Sensor type  Optical  Resolution  500 (dpi)  Sensing area  16.0 x 19.0 (mm)  Image size  272 x 320 (pixel)

Application:

• Access control
• Time and attendance
• Door lock
• Safe lock
• POS system
• Smartcard, ATM

TPR3005T-3C variable DC power supply

TPR3005T-3C variable DC power supply

This is double-channel regulated DC power supply with a back-light LCD panel.The voltage and current can be adjusted continuously with Knobs that are hidden behind a panel to provent accidental movement.Two channels-canbe run series,parallel function or independently from each other.CH3 is a fixed output with three settings 2.5V,3.3V and 5V.They are used in product research departments,laboratories,electronic production lines,and also in the communications industry.

Technical Specs:

• AC Input Voltage: AC220V±10%.50Hz;AC110V±10%.60Hz(Optional)
• Output Voltage Range:CH1 0-30V,CH2 0-30V,CH3 2.5V/3.3V/5V
• Output Current Range: CH1 0-5A,CH2 0-5A,CH3 3A
• Rated Output Power:315W
• Voltage Display Precision:0.1V±2bit
• Current Display Precision:0.01A±2bit
• Stabilily of Voltage: ≤0.01%+2mV
• Stabilily of Load: ≤0.01%+5mV
• Ripple and Noise: ≤1mVrms
• Protection Method:current-limited lower voltage protection
• Environment Parameters:Relative humidity<80 li="">
• Temperature Range:32-104F
• Cooling model:fan
• Dimension:370(L)x250(W)x160(H)mm

P2.54 Audio Sync 2X40 Raster LED Spectrum Analyzer

P2.54 Audio Sync 2X40 Raster LED Spectrum Analyzer is a Real-time Spectrum Analyzer that is based on a 40*2 raster display. It is designed to analyse the spectral characteristics of the incoming audio signal and dynamically display the variation of audio signal over a given frequency range. With a 4-way DIP switch integrated, It is allowed to connect as many as 5 analyzers in series and display the variation of audio signal in other frequency range. Two raster displays can also be used as the volume display of the left and right sound track of the audio signal. When analyzers are used in series, the top raster band will be illuminated as a way of holding the peak value. Moreover, the variation in display won't make people feel abrupt since fade-in & fade-out effects have been introduced.

Features:

• Size: 102.00mm (L) X 62.80mm (W) X 34.72mm (H)
• 2*40 segment LED raster are installed.
• Splendid fade-in & fade-out visual effects
• Able to detect the amplitude of both sound tracks of audio signal at the same time
• Allows you to specify the frequency range

K1	K2	K3	K4	Func.	Left raster display	Right raster display
OFF	OFF	OFF	OFF	Volume display	Left sound track	Right sound track
ON	OFF	OFF	OFF	Frequency A	150HZ	310HZ
OFF	ON	OFF	OFF	Frequency B	470HZ	780HZ
OFF	OFF	ON	OFF	Frequency C	1100HZ	1720HZ
OFF	OFF	OFF	ON	Frequency D	2660HZ	4060HZ
ON	ON	ON	ON	Frequency E	6400 HZ	9840HZ
Other frequency settings				Not defined	-	-

Specifications:

Power Supply Requirements	Min.	Typ.		Max.		Units
Supply Voltage:
ME-SP520	-	12		-		V
Performance
Input Sensitivity	-		±0.5		-	V
Physical/Environmental
Operating Temperature	-10	-		60		?
Storage Temperature	-40	-		75		?
Humidity	0	-		85		%RH

Applications:

• Entertainment
• Spectrum analyse
• Multimedia