Wednesday, October 09, 2013


Meanwell PB-600-48: 600 Watt Single Output Lead-Acid Battery Charger.

- 2/3/8 stage charging
- Universal AC input / Full range
- Built-in active PFC function PF>0.95
- Protection: Reverse polarity / Short circuit / Over voltage / Over temperature
- Charger for lead-acid batteries
- 3 color LED loading indicator
- Built-in remote ON-OFF control
- Built-in temperature compensation function
- Built-in fan speed control (depends on charging current)


Input Voltage90 ~ 264Vac 127 ~ 370Vdc
Input Frequency47 ~ 63Hz
Power Factor0.95/230Vac 0.98/115Vac at full load
Input Current6.8A/115VAC 3.4A/230VAC
Inrush Current25A/115Vac 50A/230Vac
Leakage Current<3 .5ma="" 240vac="" td="">
Battery TypeOpen & Sealed Lead Acid
Over Voltage ProtectionShut down o/p voltage, re-power on to recover
Over Temperature ProtectionAutomatically derate charge current until zero, recovers automatically after temperature goes down
Remote ControlOpen: Normal work Short: Stop Charging
Leakage Current from Battery1mA
Fast Charge2 / 8 stage select
Charging OKRelay contacts (RY15)
Battery Banks2 banks (A & B)
Output OKRelay contacts (RY13)
Temperature Sense (Optional)By NTC
Working Temperature-20°C ~ +60°C (Refer to output load derating curve)
Working Humidity20 ~ 90% RH non-condensing
Storage Temperature, Humidity-40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient±0.05%/°C (0 ~ 50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Withstand VoltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25°C 70%RH
Safety StandardsUL1012, TUV EN60335-1, EN60335-2-29 (except for 48V) approved
EMCCompliance to EN55022 (CISPR22); EN61000-3-2,-3; ENV50204;
EN61000-4-2,3,4,5,6,8,11; EN55024; light industry level, criteria A
MTBF135.6Khrs min. MIL-HDBK-217F (25°C)
Dimensions230 x 158 x 67mm