Friday, October 20, 2017

WECO 950-DS Terminal 4 pin pitch 5mm

WECO 950-DS Terminal 4 pin pitch 5mm Screw Terminal Block

Specifications:
- Terminal type: Screw Terminal Block
- Type of shape: -
- Pitch: 5 mm
- Number of pins: 4
- Mounting: PCB

Resistor 47K OHM 0805 10 pcs per pack tolerance of 1 percent

Resistor with resistance value 47.000 Ohm (47K) and tolerance of 1%. This resistor is packaged in 0805 SMD pack.


  • Packaging 0805
  • Tolerance of 1%
  • Obstacles 47K

Led Green Super Bright Diffused 5mm

LED round type 5 mm.


  • 100 mA current (peak)
  • 2.2VDC power supply - 2.5VDC
  • Green light color
  • Diffused lens color
  • 5 mm lens diameter
  • The basic ingredients of AlGaInP
  • The angle of light is 45 degrees
  • Lightness of 60 mCd (@ if20mA)

AXIAL FAN 5VDC 25mm 3CFM

mini cooling fan with dimensions of 25 x 25 x 10 mm. Mini fan works on 5V voltage, equipped with cable along ± 125 mm, and the resulting noise was quite small, ie only ± 31 dBA. This device is perfect if enabled as a cooling fan for Raspberry Pi, LattePanda, Beaglebone, and other mini PC.

Thursday, October 19, 2017

SIM800L GSM GPRS Module

GSM GPRS module that supports quad-band frequency (850/900/1800 / 1900MHz). This module can be enabled to send and receive SMS from one microcontroller to another microcontroller.



Specification:
- Network: Quad-band 850/900/1800/1900 MHz
- GPRS Class: class 12
- Data Speed: 85.6 kbps
- Interface: Serial
- Working Voltage: 3.4 ~ 4.3 V
- Working Temperature: -40? ~ 85?

Ethernet Shield W5100 R3

Is an ethernet shield compatible Arduino based on W5100 chip. This Shield allows the Arduino board to connect to the internet via ethernet. This shield supports TCP & UDP network protocol and provides microSD slot for storing data on Arduino via SPI bus communication.


Specification:
- Chipset: W5100
- Ethernet: 10/100 Mbps
- Protocol: TCP, UDP
- Memory: 16 KB (for buffer TX / RX)
- Working Voltage: 3.3 V
- Supports auto MDI / MDIX
- Supports ADSL Connection

Piezoelectric Pulse Sensor

high-end pulse sensor equipped with signal filters, signal conditioning, and comprehensive temperature circuit. This makes it very stable, reliable, and very easy to use. This device detects pulse wave in the form of analog output voltage, so it is very easy to integrate with microcontroller like arduino through ADC interface.
This sensor is particularly applicable to biomedical fields, audio wave acquisition, heart wave monitoring, etc.

- Voltage: 5 ~ 6 VDC
- Piezo range: -50 ~ 300 mmHg
- Sensitivity: 2000 uV / mmHg
- Precision Level: 0.5%
- Repetition: 0.5%
- Lagging: 0.5%
- Overload: 100 times
- Cable Length: 1.25 meters



LSM303DLHC 3D accelerometer and 3D magnetometer module

LSM303DLHC is a 3D accelerometer + 3-axis 3D magnetometer sensor. LSM303DLHC has a linear acceleration scale of ± 2g / ± 4g / ± 8g / ± 16g and magnetic field scale ± 1.3 / ± 1.9 / ± 2.5 / ± 4.0 / ± 4.7 / ± 5.6 / ± 8.1 gauss.
The LSM303DLHC features an I²C interface that supports standard frequency (100 KHz) and fast frequency (400 KHz) modes.
It is suitable to be applied on digital compass, smartphone, portable measuring device, sensors for microcontroller, etc.

Specification:
- Channel: 3-axis
- Magnetic Field Measurement Scale: ± 1.3 / ± 1.9 / ± 2.5 / ± 4.0 / ± 4.7 / ± 5.6 / ± 8.1 gauss
- Measuring Scale of Linear Acceleration: ± 2g / ± 4g / ± 8g / ± 16g
- Output Data: 16-bit
- Interface: I²C
- Working Voltage: 3.3 V
- Integrated with temperature sensor
- Integrated with FIFO
- Supports detection of 4D / 6D orientation

U2008B-MY stepper driver chip

U2008B-M is a controller / driver IC for stepper motors equipped with bipolar control-phase technology.

Specification:
- Working Voltage: 14.5 - 16.5 V
- Input current: 3 mA
- Output Current: 2 mA
- Output of Pulse: 125 mA
- Packaging: DIP-8

Gens ace 1000mAh 11.1V 25C 3S1P Lipo Battery Pack

Gens Ace 1000mah 3s 25C 11.1V Lipo Battery is the perfect fit for small Planes in the 800mm Class, and combines our production Quality with durability, power and low weight we produce in our Factory every day.

Specs:

  • Cpacity: 1000mAh
  • Voltage: 3S/11.1V
  • Discharge Rate: 25C
  • Weight: 96g
  • Size: 72X36X19mm

More information:
  • Net Weight (g) 96
  • Brand Gens ace
  • Capacity 1000 mAh
  • Discharge Rate (C) 25
  • Max Cont Current (A) 25
  • Max Burst Current (A) 50
  • Max Burst discharge Rate (C) 50
  • Parallel (P) 1
  • Voltage 3S (11.1V)
  • Length (mm) 72
  • Width (mm) 36
  • Thickness(mm) 19
  • Wire Gauge 14#
  • Wire Length (C/D) 120mm / 150mm
  • Connector Type T-plug
  • Balancer Connector Type JST-XHR

SEIKO-CAPG247 Thermal Printer

CAPG247 is a modular thermal printer that has been equipped with automatic paper cutter. CAPG247 is capable of printing with 8 dots / mm resolution and speeds up to 150 mm / sec. CAPG247 is compatible with computers running Windows and Linux operating systems.

Specification:
- Method: Thermal line dot printing
- Resolution: 8 dots / mm
- Paper Width: 58 mm
- Speed: 150 mm / s
- Sensor: Thermistor, mechanical switch, photo interupter
- Working Voltage: 24V
- Current consumption: 5.2 A (max)
- Dimensions: 80.5 x 65.0 x 22.2 mm

Brightek wh-a9 Barcode thermal printer

WH-A9 is a thermal barcode printer with a mini design, compact, and easy to carry anywhere. WH-A9 comes with serial communication interface (RS-232C & TTL) and parallel. WH-A9 can be used to print on paper 57 mm wide with a maximum speed of 50 mm / sec. This device is suitable for use on cashiers, kiosk, offices, etc.

Specification:
- Speed: 50 mm / s
- Resolution: 8 dots / mm
- Interface: Serial (RS-232C, TTL) / parallel interface
- Power Supply: 3.5 - 9 VDC
- Power: 15 W
- Paper Width: 57 mm
- Dimensions: 84 x 98 x 57 mm

PC rs485 adaptors with the D type to rj11 adaptors

converter cable that works to convert RS-485 interface to RJ11.


  • Interface or RS-485 & RJ11 port
  • RS-485 Converter - RJ11

Led Hi-Eff Red/Green White DIfussed 5mm Com Anoda type BL-BEG204-B

Led Hi-Eff Red / Green White 5mm DIfussed Com Anode type BL-BEG204-B
A bi-colored LED that can emit red and green light. It is suitable for decoration, automotive accessories, electronics device indicator, and so forth.


  • 30 mA current
  • 2.2 VDC power supply
  • The color of red and green light
  • Diffused lens color
  • 5 mm lens diameter
  • GaAsP / GaP + GaP / GaP base material
  • 20 mcd brightness of light

Led three color Red, Green and Blue water clear 5mm

RGB LED (3 color) 5mm with water clear lens color.


  • Flow Red, Green, Blue 30mA
  • Red Power (1.8VDC), Green (3VDC), Blue (3VDC)
  • Color of RGB light
  • Water Clear lens color
  • 5mm lens diameter
  • Angular beam angle 20 deg
  • Red Light brightness (1500mcd), Green (6000mcd), Blue (1500mcd)

Monday, October 16, 2017

PCB Header with ear 50 Pin right angle

PCB Header


  • Type of PCB terminal header
  • Male (male / female) form
  • Pitch 2.54 mm
  • Number of pins 50 pins
  • Mounting PCB
  • Mounting angel Right

Sunday, October 15, 2017

Terminal block pluggable 5 pin Female/Male pitch 5.08mm

Pluggable Terminal Block



  • Terminal type Pluggable Terminal Block
  • Shape/Varian (female / male) Female or Male 
  • Pitch 5.08mm
  • Number of pins 5
  • Mounting PCB

Led Green Super Bright Diffused 3mm

Led green color (round type) Super Bright Diffused 3mm


  • 100 mA current (peak)
  • 2.2VDC power supply - 2.5VDC
  • Green light color
  • Diffused lens color
  • 3 mm lens diameter
  • The basic ingredients of AlGaInP
  • The beam angle of light is 40 degrees
  • 120 mCd brightness

SC50-A1 IDC Socket

IDC socket 50 pin


  • Type of IDC Socket terminal
  • Shape (female / male) Female
  • Pitch 2.54 mm
  • Number of pins 25x2
  • Plastic packaging materials

Terminal block pluggable 2 pin Male pitch 5.08mm

Pluggable Terminal Block (Male)


  • Terminal type Pluggable Terminal Block
  • Male (male / female) form
  • Pitch 5.08mm
  • Number of pins 2

Tuesday, October 10, 2017

Terminal block pluggable 2 pin Female pitch 5.08mm

Pluggable Terminal Block (Female)


  • Terminal type Pluggable Terminal Block
  • Shape (female / male) Female
  • Pitch 5.08mm
  • Number of pins 2
  • Mounting PCB

Terminal block pluggable 3 pin Male pitch 5.08mm

Pluggable Terminal Block (Male)


  • Terminal type Pluggable Terminal Block
  • Male (male / female) form
  • Pitch 5.08mm
  • Number of pins 3
  • Mounting PCB

Terminal block pluggable 3 pin Female pitch 5.08mm

Pluggable Terminal Block (Female)


  • Terminal type Pluggable Terminal Block
  • Shape (female / male) Female
  • Pitch 5.08mm
  • Number of pins 3
  • Mounting PCB

Saturday, October 07, 2017

Wireless Mini Keyboard 92 Keys QWERTY & Touchpad Mouse

a mini QWERTY keyboard equipped with 2.4 GHz wireless technology and has been equipped with touchpad for navigation purposes. Powered by a lithium-ion battery with a capacity of 810 mAh makes it tough enough to accompany your typing activity and cursor navigation. To charge the battery has provided a micro USB cable that you can connect to a power source such as a mobile adapter / charger or computer USB port.
This keyboard is compatible with computers operating windows, linux, and windows. Or mini PCs like Raspberry Pi, Lattepanda, Beaglebone, etc.

Specification:
- Frequency: 2.4 GHz
- Keyboard type: QWERTY
- Battery: Lithium-Ion 3.7 V @ 800 mAh
- Voltage Charger: 5 V
- Black
- Touchpad: Yes
- Features: LED notification, one finger to left click, two finger to scroll, three finger to right click

Thursday, October 05, 2017

Red White Case for Raspberry Pi 3

protective case for Raspberry Pi 3 B model that is designed with an elegant and minimalist design. In this case has been equipped with a hole to access HDMI port, USB, power, ethernet, micro SD, and audio jack, so that customers more freely in accessing ports on Raspberry Pi without having to disassemble pairs of cases.

AT12-1.5C Soldering Tip

Solder end (taper) with dimensions as follows.
Specification:
- Outer Diameter: ± 5 mm
- Inner diameter: ± 4 mm
- Length: ± 26 mm
- Solder Eye Solder diameter: ± 1 mm

CS115-B Plastic Small Case with CR2032x2 Battery Compartment

Small plastic plastic box TAKACHI brand made of high quality ABS plastic. Suitable for handheld custom tools. Also equipped with 2x CR2032 battery and silicon cover.

TAKACHI is a Japanese manufacturer as well as specialist in manufacturing of enclosures for the needs of industrial devices that offer various enclosures of different types of shapes and high quality materials for custom industrial project purposes.


For other dimensions and details, match the following Part Code with the datasheet provided.




Part Code: CSS115-CL-BL

CS115N-B Portable Black Plastic case

Box made from ABS high-quality production Takachi smartphone-size suitable for use as an enclosure for custom tools, portable and handheld, among others: remote controller, wireless key fob, small tester / device etc.


TAKACHI is a Japanese manufacturer as well as specialist in manufacturing of enclosures for the needs of industrial devices that offer various enclosures of different types of shapes and high quality materials for custom industrial project purposes.

108.9 x 56.9 x 1mm PCB for use with CS115 Case

Is a PCB prototyping dimension 108.9 x 56.9 x 1 mm consisting of two layers of copper. Board PCB is made of glass epoxy material (FR-4). This board offers hundreds of PCB holes 1 mm diameter with a distance of 2.54 mm between holes that you can make the media to design your project prototype electronics. In addition, on this board also has provided two holes to put the battery socket. This makes the board is very suitable if enabled as a portable electronic device design medium.

Specification:
- Dimensions: 108.9 x 56.9 x 1 mm
- Material PCB: Glass Epoxy (FR-4)
- Number of Holes: 578 holes
- Diameter of Hole: 1 mm
- Distance between holes: 2.54 mm
- Layer: 2 sides

Black spacer of plastic material 30mm

Black spacer of plastic material with a height of 30 mm

High Torque DC Geared Motor 300rpm

12 V DC motor equipped with gearbox to maximize its performance. This motor is capable of producing torque of 9 kg-cm with a rotation speed of 300 RPM. This motor is very suitable for robotics applications, automation systems, mechanical drivers, and so forth.

  • Working voltage 12 VDC
  • Consumption of no-load current 1.5 A
  • Current consumption of 5 A (max.)
  • Maximum torque is 9 kg-cm
  • Maximum rotation speed of 300 rpm
  • Shaft shape & size 25 mm (length)
  • Dimensions without 63 mm shafts
  • Gear box Yes

MSGEQ7 Graphic Equalizer Display Filter

IC graphic equalizer in charge of dividing the audio spectrum into 7 bands (63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz). This IC works on a voltage of 2.7 V - 5.5V. It is suitable for audio video applications.

- Working Voltage: 2.7 - 5.5 V
- Number of Channels / Bands: 7
- Technology: CMOS
- Gain: 20 dB
- Oscilator: Internal
- Packaging: DIP-8
- Applications: Automotive audio devices, general audio devices


Datasheet

Wednesday, October 04, 2017

Gland cable PG 16

Gland cable PG 16 is a device that serves to bind and strengthen cable connections. Gland cable PG 16 can be applied to cables between 10 mm to 14 mm in diameter,


Specification:
- Type: PG 13.5
- White color
- Cable Diameter: 10 ~ 14 mm
- Material: Plastic

Gland cable PG 13.5

Gland cable PG 13.5 is a device that serves to bind and strengthen cable connections. Gland cable PG 13.5 can be applied to cables with diameters between 6 mm to 12 mm,


Specification:
- Type: PG 13.5
- White color
- Cable Diameter: 6 ~ 12 mm
- Material: Plastic

Mini Micro Submersible water pump motor DC 3V-6V 120LH

It is a miniature water pump powered by a brushless DC motor that operates at a voltage of 3 VDC - 6 VDC. Mini water pump is usually used in irrigation systems hydroponics plants, robotics, and so forth.

Specification:
- Working Voltage: 3 - 6 VDC
- Flow Rate: 80 - 120 L / hr
- External Diameter: 7.5 mm / 0.3 "
- Inner Diameter: 4.7 mm / 0.18 "
- Overall Diameter: 24 mm / 0.95 "
- Length: 45 mm / 1.8 "
- Height: 33 mm / 1.30 "
- Material: Plastic
- Mechanical Mover: Brushless DC Motor
- Working Time: 500 hours
- Cable Length: 21 cm

Uni-T UT202A Auto-Ranging AC DC 600 Amps Auto/Manual Range Digital Handheld Clamp Meter

UNI-T UT202A is a 3 1/2 digit digital clamp meter with stable, reliable, and secure performance. Equipped with a double LSI as the core, an internal ADC converter, as well as overload protection make excellent performance for measurement applications of various electronic instruments.
UNI-T UT202A you can use to measure DC voltage, AC voltage, resistance, diode, AC current, and so forth.

Specification:
- AC current: 20 A / 200 A / 600 A ± (1.5% + 5)
- AC Voltage: 2V / 20V / 200V / 600V ± (1.2% + 5)
- DC voltage: 200 mV / 2 V / 20 V / 200 V / 600 V ± (0.8% + 1)
- Resistance: 200/2 K / 20 K / 200 K / 2M / 20M Ohm ± (0.8% + 3)
- Display: LCD
- Power Supply: 1x 9V 6F22
- Maximum Conductor Diameter: 26 mm
- Dimensions: 210 mm x 75.6 mm x 30 mm
- Red
- Features: Equipped with carier bag, pair of probes, and guide book

Flat Telephone Cable contents 4cables

Flat Telephone Cable contents 4 fiber cables

  • Cable Telephone Cable Type 
  • Flat / flat / flat shape
  • Color cable: white outer skin
  • Number of lines / contents of cables in 4 wires / lines
  • Price per meter: see price

Tuesday, October 03, 2017

WL20 WIFI interface Fingerprint & Time Attendance by ZKTECO

ZKTeco WL20 is a fingerprint reader & time attendance device that has an elegant and modern design and has integrated wifi connectivity in it. The device also supports hotspot mode, so it can connect to mobile devices (Android & iOS) via downloadable mobile apps on the Google Play Store or the App Store. ZKTeco WL20 equipped with high-quality fingerprint sensors are very sensitive to the pattern of fingerprint, so the accuracy of fingerprint readings remain optimal even if the user's finger conditions are wet or rough.

Features:
- Supports Wi-Fi function, USB client & host
- Performance remains stable even under conditions under bright light source
- Supports IR auto-turning function to save power
- High sensitivity in fingerprint identification, even if the user's finger is wet, dry, or rough
- Time Cube Cloud Solution
- Supports integration with mobile devices / smartphones
- Equipped with Excel SSR software by default, for shift and management reporting purposes


Specification:
- Capacity: 1000/1500 fingerprint (without SSR)
- Algorithm: ZKFinger VX10.0
- Capacity Recording: 50,000
- Screen: 2.8 inch TFT Screen
- Communications: Wi-Fi, USB-Host, USB-Client
- Standard Function: SSR, DST, Scheduled-bell, Self-Service Query, Automatic Status Switch, T9 Input, 9 digit user ID
- Optional Functions: TA Assistant APP, Time Cube Cloud Solution
- Power Supply: DC 5V 0.8A
- Work Moisture: 20% -80%

Friday, September 29, 2017

ESP-WROOM-02 ESP8266 WROOM Wi-Fi Module



ESP-WROOM-02 is a low-power 32-bit MCU Wi-Fi module based on ESP8266 chip, embedded with TCP/IP network stacks, 10-bit ADC, and HSPI/UART/PWM/I2C/I2S interfaces. ESP-WROOM-S2 uses a 2 MB SPI flash connected to HSPI, working as the SDIO/SPI slave with the SPI speed of up to 8 Mbps.

ESP8266 Module can operate in the low power connectivity modes; for instance, if it operates in DTIM10, it only consumes 1.2mW while maintaining a Wi-Fi connection. The module also integrates an SPI flash of 16 Mbits used for storing user programs, data and firmware.

Certificates and Compliances:


Wi-Fi Alliance, SRRC, FCC, CE, TELEC, IC & KCC Certified
RoHS, Halogen Free, REACH & CFSI Compliant
HTOL, ESD-HM, MSL, ╬╝HAST, HTSL
Output Power: +22dBm peak power in FCC certification



Small Form Factor



ESP8266 Module can be easily integrated into space-limited devices due to its small size of only 18mm x 20mm (ESP-WROOM-02) / 16 mm x 23 mm (ESP-WROOM-S2).

Metal Oxide Varistor MOV

ZINC OXIDE VARISTOR
 varistor available voltage 100V, 150V, 250V, 270V, 430V, 820V