XN260 INFRARED THERMOMETER

Public Area Thermal Camera Infrared Thermometer System

This infrared body temperature measuring device XN260 has a measurement range of up to ± 6-10 meters. This system is also equipped with a body heat tracking camera (thermal camera). And also this tool is able to detect several faces at once that fall within the range of the camera.

It is suitable to be installed in a wide public area / public service as a measure to prevent the spread of a disease with an initial indication of rising / high body temperature.

Has a blackbody measurement system. If in an area there is a fairly crowded human crowd, then this can affect the accuracy of body temperature measurements. By using this system, this can be minimized so that measurement results can be obtained that are far more accurate.

Specifications:

• Infrared Cameras:
• Tipe : Uncooled focal plane microthermal.
• Lens length: 13 mm.
• Pixels: 384 x 288.
• Cell : 17 µm.
• Wavelength: 8-14 (µm).
• Sampling frequency: 30 Hz.
• Voltage: 12 VDC.
• Thermal sensitivity: <= 0.05 ° C at 30 ° C.
• Standard Cameras:
• Lens length: 5.4 - 108 (mm).
• Focus mode: Automatic.
• Pixels: 2 million pixels.
• Frame frequency: 25 Hz.
• Image resolution: 1920 x 1080
• Can recognize several faces at once (face detection).
• Temperature measurement accuracy: ± 0.2 ° C.
• Power consumption: <= 120W under normal conditions of 25 ° C.
• Working temperature: -30 ° C ~ 60 ° C.
• Humidity: <= 95%.
• Resistance level: IP66 (resistant to dust, impact and water).

DATASHEET::

https://drive.google.com/open?id=17zCwMwDNtYSNqU0yULGMiYQddIZ4JebL

Remote AI Temperature Screening System

Remote Artificial Intelligent Temperature Screening System is a system designed to perform human forehead temperature measurement is non-contact. The system is optimized so that it can work accurately with a margin of error of only about 0.3 ° C in the condition that the temperature in a radius of 3 meters in front of the system. Results will also remain accurate readings even though the person who measured the temperature was wearing a mask. This system is perfect when used in a condition which requires the measurement of the temperature of the forehead of man quickly, accurately, and masiv the same time and continuously, as it is today is where the virus COVID-19 is endemic throughout the world and require precaution and handling fast. The system is also equipped with face recognition feature, so long as a person's face information stored in the database, the system will recognize the person's face and simultaneously measuring the forehead temperature at the same time. This system is very spacious penggunaaannya, can be applied to a human forehead temperature measurements at the entrance / exit airports, terminals, stations, ports, factories, schools, malls, and so on.

Product excellence

• Can perform face recognition and measurement in non-contact forehead temperature
• Collection of data in a multi-point temperature to ensure accuracy
• Face detection feature so that the area where the temperature is read only on the forehead, in order to avoid interfering with the temperature of the surrounding environment
• Readings remain accurate even though the person who measured the temperature was wearing a mask
• Can measure the temperature of many people at the same time continuously
• It features an accurate face recognition to match faces the data from the database
• Alarm fitted to report missing that the measured temperature is not normal, this temperature range can be adjusted by the system

Specification

• Image resolution: 1920x1080
• Focal Length: 8 mm
• Measurement Range Temperature: 20 ℃ - 45 ℃
• Accuracy: ≤ ± 0.3 ° C (at the target temperature: 32 ° C - 42 ° C)
• Length Measurement: <500 font="" ms="">
• Distance Measurement: A maximum of 3 meters (ideally 1 - 1.5 meter)
• temperature correction: Real-time auto-correction with embedded black body
• NETD: 60 mk
• Working Environment Temperature: 16 ° C - 32 ° C
• Storage Temperature: -20 ° C - 60 ° C
• Working Humidity: <90 font="" non-condensing="">

Software features

• Face detection and face recognition
• Temperature monitoring
• Abnormal temperature warning
• Data viewer
• Available Data API to connect to third-party platforms
• management personnel
• Collections temperature and algorithms
• The setting temperature warning is not normal
• attendance management
• device settings
• Site management of multiple devices

VITAL RECORDS

• Avoid using the system under direct sunlight
• Avoid using the backlight system (backlight) is strong
• Avoid system usage under ambient temperature of 15 ° C
• The measured target temperature can not wear hats, helmets, or anything that covers the forehead area
• Cultivated measurable targets at a distance of 1 meter in front of the system
• The system takes at least 2 minutes for the warm-up when the device is moved from the indoor to the outdoor environment
• The system requires a minimum of 20 minutes to adapt to the room temperature / about before testing
• The system requires a minimum of 5 minutes for automatic calibration and initialization when it is first turned on

equipment Products

• AI detector x 1
• Terminal x 1
• Power adapter x 2
• USB cable x 1

Lockitron Mechanical Assembly

Lockitron Mechanical Assembly is an innovative home safety device that allows you to lock and unlock your front door latch via smartphone.

This product requires 4 AA batteries as a power source in order to work properly.

The Lockitron is an innovative home security device from Apigy that allows you to lock and unlock the deadbolt on your front door from your smart phone. This specific part is the mechanical assembly that makes up the majority of the device without the electronic guts inside. This means that you get to decide and add your own unique wireless and motor control options! With a few turns of a screwdriver, the Lockitron easily fits over the deadbolt lock on the inside of your door.

The Lockitron Mechanical Assembly includes the mechanisms to physically turn a lock, the motor, the housing, and the means to secure it all to your deadbolt. As stated before, you will need to supply your own electronics as well as four AA sized batteries for the assembly and electronic components to operate.

Note: Be aware that the Lockitron may not fit all doors. Please consult the Door Compatibility link in the Documents section below for a handy cut out “fitting” example to make sure your door is compatible with the Lockitron.

371.5MHz/433.92MHz Wireless Remote Controller Electric Lock Door

371.5MHz Wireless Remote Controller Electric Lock Door

Wireless Remote Controller Electric Lock is the best for auto door open/door off. It is using RF UHF design. There are two relay modes in host for user to set various setting, use switch dip can set mode or code easily, it´s very convenience. Power supply provides DC 12V/24V or AC 12V. You can select one key remote controller (TX-F01), two keys remote controller (TX-F02) or four keys remote controllers to collocate with every mode in host.

Specs:

• Sensitivity : 3uV
• Code : 28,212,or 38,312
• Power supply : 12V or 24V AC/DC
• Frequency Range : 371.5MHz / 433.92MHz
• Power consumption : 10.6 mA/12V
• Power consumption : 10.6 mA/12V
• Relay contact voltage : 5A 24V DC or 12V AC
• Control type : on/off, momentary,continue
• Usage range : Elctronic lock, Garage door, Home alarm security system,Auto control system.

NP301 ,1-port RS232/485/422 to Ethernet converter

NP301 ,1-port RS232/485/422 to Ethernet converter by 3onedata

NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.

What's more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users’ configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc.

NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment.

Easy wall and DIN-Rail mounting.

Features:

1.Adopt 32 bit ARM processor

2.Support 3-in-1 RS-232/RS-485/RS-422 serial interface

3.Support 10/100M

4.Support 300bps-115.2Kbps

5.Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol

6.Support across gateway, router communication

7.Support standard TCP/IP SOCKET

8.Support Windows serial interface driver mode

9.Support Virtual serial driver access and auto connect once the network disconnect

10.Support network and serial interface configuration mode

11.Low consumption design

12.Support DIN-Rail or wall mounting installation

13.Working termperature: -40～75℃

Specifications:

LAN：

Standard: 10Base-T，100Base-TX

Protocol: Support TCP, UDP, APR, ICMP and DHCP protocol

Signal: Rx+,Rx-,Tx+,Tx-

Speed: 10/100Mbps

Working: Full-duplex and half-duplex

Working mode: Support Server and Client

Transmission; 100m

Connector: RJ45

Serial interface:

Serial interface number: 1 port RS-232,1 port RS-422/485

RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND

RS-422 signal: T+（A）,T-(B),R+(A),R-(B),GND

RS-485 signal: D+（A）,D-(B),GND

Parity bit: None,Even,Odd,Space,Mark

Data bit: 5bit,6bit,7bit,8bit

Baud rate: 300bps～115200bps

Flow control: RTS/CTS or XON/XOFF

Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction

Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback

Transmission: RS-485/422 side 1200M,

RS-232 port 15M

Interface protection: 1500W surge protection, 15KV static protection

Interface type: RS-232 side DB9 male，RS-485/422 side 5 bit terminal block

Power supply:

Power input: 9~48VDC

Consumption: Approx 1.4W

Environment

Working temperature:-40°C～75°C

Storage temperature:-40°C～85°C

Humidity: Relative humidity 5% to 95%

Appearance

Color: Black and Blue

L×W×H: 100mm×69mm×22mm

Material: Iron (Shell)

Weight: 530g

Warranty: 5 years

Approvals: FCC, CE, RoHS approvals

SMS control and Alarm system

SMS control and Alarm system

An alarm system and control home appliances based on SMS. As an alarm function, this unit can be connected to various types of sensors such as the Smoke Detector, Motion Detector or LPG Detector. As a control function, this unit can control the activation of lights, water pumps or other electrical equipment via SMS or scheduled by time, so the system can activate the contact at certain hours every day, once or on certain days

specifications:

- Can be programmed for more than 20 Cell Phone user

- 4 contacts control max 400VAC / 5A Solid State

- 4 Manual Switch

- Can be programmed for each 5 schedule at each contact

- 2 group alarm sensor inputs that can be programmed with a message

- Each group can be paralleled up to 10 units of the same alarm

- There is a remote control for the panic button, activate the alarm and control equipment macros

- USB Port for programming messages and user numbers

- Mode arm / disarm can  manually set, miss call from Cell Phone or the remote control