Wednesday, November 07, 2018

Conveyor Belt Kit for Dobot Magician

A kit simulation of conveyor production in an industrial environment, which is designed for kit arm robot Dobot Magician, Kit conveyor comes with a speed that can be set, proximity sensors, color sensors, as well as the block of wood (for simulating the object produced), so it is ideal when combined with Dobot Magician to simulate how the production process using a robot arm in the actual industry.

This kit consists of:
1. Conveyor Belt: mini conveyors for production automation systems with Dobot Magician 
2. Photoelectric Switch: Sensor to detect the presence of objects 
3. Color Sensor: Sensor to detect red, green, and blue on the object 
4. Wood Block: blocks of wood to simulate the production process with Dobot Magician


Note: Magician Dobot NOT INCLUDED in the sales package

Dobot Magician - Basic Plan

Magician Dobot Basic Plan is a multifunctional desktop robot arm designed for robotics education practices. 
This robot comes as display media learning robot arm just like that of the industry, but with a working system that would be simple and its size was somewhat miniature. 
This robot can work continuously with a high accuracy of movement. This robot can be programmed to follow your commands, ranging from the move, grab objects, write, draw, and even scored a 3-dimensional objects.

Specifications:
- Axes: 4 
- Weight: 500 g 
- Position Repeatability (Control): 0.2 mm 
- Communication: USB 
- Power Supply: 12 V / 7 A 
- Consumption Maximum Power: 60W 
- Dimensions Plat Elementary: 158 × 158 mm 
- Material frame: Aluminum Alloy 6061, ABS Engineering Plastic 
- Controller: Dobot Integrated Controller 
- Software: DobotStudio, Repetier Host, GrblController3.6, DobotBlockly (Visual Programming editor) 
- SDK (Software Develop Kit): Communication Protocol, Dobot Library Program 
- Interface: UART 
- 3D Print Size: 150 × 150 × 150 mm 
- Material: PLA 
- Print Resolution: 0.1mm 
- Vacuum Suction Cap: 20 mm @ -35 kPa 
- Gripper Strength: 8 N
- Sistem Gripper: Pneumatic

Kelengkapan Kit:
- Robot Arm Kit
- Gripper Kit 
- 3D Printing Kit 
- Vacuum pump Kit 
- Writing and Drawing Kit

Sliding Rail Kit for Dobot Magician

An additional rail sliding accessories to expand the ability of Dobot Magician. With this kit Dobot Magician can move left and right freely. Moreover Dobot Magician provides the flexibility to program, so you can modify the movements and shifts Dobot Magician at will, ranging from simple movement to the movement of complex ones,

Specifications:
- Load: 5 kg 
- Mileage: 1000 mm 
- Maximum speed: 150 mm / s 
- Acceleration Maximum: 150 mm / s² 
- Repeat Positioning Accuracy: 0:01 mm 
- Absolute Positioning Accuracy: 0:25 mm



Dobot Magician - Advanced Educational Plan


Dobot Advanced Educational Plan is a multifunctional desktop robot arm designed for robotics education practices. 
This robot comes as display media learning robot arm just like that of the industry, but with a working system that would be simple and its size was somewhat miniature. 
This robot can work continuously with a high accuracy of movement. This robot can be programmed to follow your commands, ranging from the move, grab objects, write, draw, and even scored a 3-dimensional objects and laser engraving.


Specifications:
- Axes: 4 
- Weight: 500 g 
- Position Repeatability (Control): 0.2 mm 
- Communication: USB / WIFI * / Bluetooth 
- Power Supply: 12 V / 7 A 
- Consumption Maximum Power: 60W 
- Dimensions Plat Elementary: 158 × 158 mm 
- Frame Material: Aluminum Alloy 6061, ABS Engineering Plastic 
- Controller: Dobot Integrated Controller 
- Software: DobotStudio, Repetier Host, GrblController3.6, DobotBlockly (Visual Programming editor) 
- SDK (Software Develop Kit): Communication Protocol, Dobot Library program 
- Interface: UART 
- 3D Print Size: 150 × 150 × 150 mm 
- Material: PLA 
- Print Resolution: 0.1mm 
- Vacuum Suction Cap: 20 mm @ -35 kPa 
- Gripper Strength: 8 N
- Sistem Gripper: Pneumatic

Kit Equipment:
- Robot Arm Kit
- Gripper Kit 
- 3D Printing Kit 
- Vacuum pump Kit 
- Writing and Drawing Kit
- Laser Engraving Kit
- Joystick Control Kit
- Bluetooth & wifi module

3D Printer Dual Extruder


3D printers are devices DIY (Do It Yourself) with high precision. The device is powered by 6 stepper motors that can move to 3 axes (X, Y, and Z), in which each of these motors have a level of accuracy of 0.012 mm (X, Y) and 0.004 (Z). 
This device has also been equipped with a controller that has been integrated with 20X4 LCD that can be used to configure the device status monitoring at the same time. The LCD can display information bed and extruder temperature, stepper status, the percentage of the printing process, the configuration menu, and so forth. 
This printer comes with 2 nozzle system, so you can do printing objects with two colors at once.
To print the object is easy, you only need to prepare the design of objects in the format of "STL" or "OBJ", and then import that file into the software "Cura" then instantly ready to print your design. Or you can also copy the file to micro SD and print directly through a 3D printer controller. 
It is suitable for you the makers, beginners, professionals, and hobbyists who want to print 3D objects for various purposes.


Specifications:
- Dimensions: 530 x 435 x 430 mm 
- Display: LCD 2004 
- Print Material: PLA, ABS, Wood, TPU, Nylon, PVA, PP, Luminescent 
- Diameter Filaments: 1.75 mm 
- Frame: Acrylic black 
- Size Printing: 220 x 220 x 240 mm 
- Speed of printing: 100 mm / s 
- Diameter Nozzle: 0.4 mm 
- thickness of Layer: 0.1 - 0.4 mm 
- Accuracy XY: 0.012 mm 
- Accuracy Z: 0004 mm 
- OS: Windows, Mac, Linux 
- Software : Cura 
- File format: STL, OBJ, Gcode


Note: This kit in an unassembled, so it should be assembled first. Free assembly has been provided in the sales package. 


Monday, September 24, 2018

TRN-02 Professional Version Trainer Board

TRN-02 Professional Version Trainer Board  is a trainer module is designed so complex that a variety of applications can be implemented in it

plus FREE DU-ISP V2.0 for Programming through USB Port

SPECIFICATION
- Bread board's 700 holes
- LCD with backlight
M1632 - 4 channel ADC
- The series of signal conditioners (Zero Offset and Gain)
- Voice + speakers amplifiers
0.25 W - Real Time Clock + Battery Backup
- Stepper (Unipolar & Bipolar)
- Driver DC 2A max
- Clock Generators, linear adjusted and selector
- Pulse generator, selector adjust
- 6 digits Seven Segment & ':' to clock
- 8 bit LED Logic
- 8 bit switch push button
- 8 bit Dip Switch
- Can be used for AVR microcontroller ATMega8515
- Can be used for microcontroller Renesas R8C with DST-Stamp (not included in the package)

Packages contain:
- TRN-02 module
- Plastic Box
- RS232 Cable
- ISP Cable
- 12VDC Power Supply 
- LCD with backlight
- M1632 - User Manual
- CD , Software  & Datasheet
- Black Housing 1p , 10 cable
- Black Housing 10p, 2 Cable 
- Trainner Board Professional Version User Manual

SOFTWARE SPECIFICATION
- Delta Software Studio IDE for MCS-51
- Single HWDE Software for Renesas
- Demo version for AVR Code Vision
- AVR Studio for AVR


Friday, June 22, 2018

IoT Trainer Kit V1.0

It is a basic learning kit for learning microcontroller and Internet of Things programming languages. This kit consists of a complete and interesting hardware kit and tutorial module.
Not just a practical guide to IoT, but also given the IoT concept as a basis for understanding this subject and interesting case studies at the end of the lesson.

In Sales Package Consists of:
- Board WeMos D1 Mini (ESP8266)
- Board Arduino Nano
- Bluetooth module
- LDR sensor
- LED
- Push Button
- Regulator 5 VDC
- Micro USB cable
- Header Lines


Learning Package:
1. The basic concept of IoT
2. Basic WeMos D1 mini programming
3. Basic Arduino Nano programming
4.Control the LED light
5. Bluetooth Interfacing
6. Interfacing LDR sensors
7. Serial communication with IoT Apps
8. Deliver sensor data to Thingspeak
9. Monitoring temperature and humidity at Thingspeak
10. Full LED with Android app
11. Bot telegram notification
12. Create a CUSTOM dashboard with PHP and MySQL based (CI)
13. Buzzer control
14. Tactile button reading
15. Delivery of data to thingsboard
16. GUI design dashboard on Thingsboard
17. Data analytic / rule Thingsboard
18. Full device with Thingsboard
19. Case study

Sunday, June 03, 2018

diode zener 1N4148

diode zener 1N4148

  • Silicon epitaxial planar switching diode.
  • packaging do-35
  • Current (forward) avg 150mA
  • Peak reverse voltage 75V
  • Recovery time 4 ns
  • datasheet http: // zipansion • com / 1DDTH

BY-RA5111 Shield Antenna

BY-RA5111 Shield Antenna
An anti-metal RFID antenna panel with panel dimensions: 490 x 376 x 41 mm and cable length 3.6 meters. The device has a SMA-type connector as a link between the reader and the antenna. Suitable for field applications.

Specification:
- Frequency: 13.56 MHz
- Connector: SMA
- Power: 4W
- Working Temperature: -25? - 60?
- Dimensions: 490 x 376 x 41 mm
- Housing material: Acrylic and metal
- Black

LTC1470CS8 chip

LTC1470CS8 is IC switch Personal Computer Memory Card International Association (PCMCIA) working on voltage level 3.3 V or 5 V. IC PCMCIA switch is equipped with some support technology such as SafeSlot technology ?? and thermal-shutdown technology that will disconnect when there is excess temperature on the device. LTC1470CS8 is usually applied to Notebook, Palm, pen-based computers, and 3.3V / 5V power supply.

Specifications:
- Type: PCMCIA Switch
- Number of Output: 1
- Input Ratio: Output: 2: 1
- Output Type: N-Channel
- Interface: On / Off
- Voltage: 3.3V and 5V
- Output current: 1 A
- RDS: 140 mOhm
- Features: Equipped with SafeSlot technology ?? and thermal-shutdown technology
- Protection: Limit currents and excess temperature
- Working Temperature: 0 ° C - 70 ° C
- Packaging: SOIC-8

datasheet http: // zipansion • com / 1BVWI

Planetary Gearbox

Planetary gear box motor production Tamiya
Specification:
- Has a 4: 1, 5: 1, 16: 1, 20: 1, 25: 1, 80: 1, 100: 1, and 400: 1 gear ratio.
- Using Mabuchi RC-260 motor with 3-5V power supply

datasheet http: // zipansion • com / 18dXv

Heat Sink CTS APF19-19-13CB/A01

Heat Sink APF.
Specifications:
- Thermal Resistance: 7.05 degree C / Watt
- Thermal Impedance: 0.82 degree C-in2 / W
- Fin Matrix: 12 x 2
- Basic ingredients: Aluminum
- There is adhesive glue to attach Heat sink to IC
- Suitable for ICs with BGA, LGA, CPU, ASIC or IC packs that have flat surface area
- Dimensions: 19 x 19 x 6.3 mm

datasheet http: // zipansion • com / 18dVo

JRC CCA-482J1 GPS Receiver

JRC CCA-482J1 GPS Receiver

  • Car GPS Receiver multichannel receiver with -130 dBm sensitivity
  • Power supply 3.3 VDC +/- 5%
  • Frequency of work 1575.422MHz (L1), C / A code
  • Controller CCA-482J1
  • Number of satellite reception 15
  • Hot start 8 seconds
  • Warm start 33 seconds
  • Cold start 40 seconds
  • The format of the data mapping WGS-84
  • JRC Standard / R8.0 data format
  • interface UART (3.3 VDC)
  • Antenna (internal / external) external
  • datasheet http: // www • jrc • co • jp / eng / product / gps / gpsreceive ...

LM317 Regulator

LM317 Regulator

  • 3-Terminal Adjustable Regulator
  • Output current 1500mA
  • packaging TO-220
  • Power supply input + 4.2V s.d. + 40.37V DC
  • The output power output is + 1.2V s.d + 37V DC
  • datasheet http: // zipansion • com / 17eDm

Robotis OpenCR1.0

OpenCR is a microcontroller module developed for Robot Operating System (ROS) Embedded System to deliver hardware and software that is open source.
OpenCR relies on STM32F7 as its main processor. STM32F7 is a 32-bit microcontroller with ARM Cortex-M7 architecture and a maximum clockspeed of 216 MHz that has outstanding performance, OpenCR also has direct support with Arduino IDE so users familiar with Arduino can easily adapt to this module.
Similar to other microcontrollers, OpenCR provides analog and digital pins that you can enable to access I / O devices such as sensors, motors, input components, etc. Communication interface provided in the form of USB, UART, SPI, I2C, and CAN.
In addition iu also available on-board IMU 9-axis sensor (MPU-9250) which consists of gyrosocope, accelerometer, and compass that you can use for project development purposes.


  • Microcontroller: STM32F746ZGT6 / 32-bit ARM Cortex®-M7 with FPU (216MHz, 462DMIPS)
  • Sensors: Gyroscope 3Axis, 3Axis Accelerometer, 3Axis Magnetometer (MPU9250)
  • Programmer: ARM Cortex 10pin JTAG / SWD connector
  • USB Device Firmware Upgrade (DFU): Serial
  • Extension Pins32 pins (L 14, R 18) * Arduino connectivity
  • Sensor module x 4 pins
  • Extension connector x 18 pins
  • Communication Circuits
  • USB (Micro-B USB connector / USB 2.0 / Host / Peripheral / OTG)
  • TTL (B3B-EH-A / Dynamixel)
  • RS485 (B4B-EH-A / Dynamixel)
  • UART x 2 (20010WS-04)
  • CAN (20010WS-04)
  • LEDs and buttons
  • LD2 (red / green): USB communication
  • User LED x 4: LD3 (red), LD4 (green), LD5 (blue)
  • User button x 2
  • Powers
  • External input source 5 V (USB VBUS), 7-24 V (Battery or SMPS)
  • Default battery: LI-PO 11.1V 1.800mAh 19.98Wh
  • Default SMPS: 12V 5A
  • External output source
  • 12V @ 1A (SMW250-02), 5V @ 4A (5267-02A), 3.3V@800mA (20010WS-02)
  • External battery Port for RTC (Real Time Clock) (Molex 53047-0210)
  • Power LED: LD1 (red, 3.3 V power on)
  • datasheet http: // zipansion • com / 17LWK

Thermopile Sensor NICERA TSUP8-2

Thermopile Sensors NICERA TSUP8-2 (japan)

a thermopile sensor that can be used to measure the temperature of an object without direct physical contact. This sensor can measure the temperature in the range - 20 ° C to 100 ° C with an accuracy level of approximately 2 ° C.

Specification:
- Working Voltage: 5 VDC
- Current consumption: 5 mA
- Measurement range: -20 ° C ~ 100 ° C
- Accuracy: ± 2 ° C
- Constant Time: 35 ms
- EEPROM: 1 Kb via 2-wire

UCN5804B chip

4-phase unipolar stepper motor driver.
Specification:
- Continuous output current: 1.25A.
- Output sustaining voltage: 35V.
- Internal clamp diode.
- Power-ON reset & internal thermal shutdown.
- Output enable & direction control.
- Drive format: wave-drive (1-phase) / 2-phase / half-step.
- Package: 16-pin DIP.
datasheet http: // zipansion • com / 13NxF

L297/1 chip

Stepper Motor Controller
Specifications:
- Power supply: 7 V
- Level of I / O voltage: TTL
- Able to control stepper motor 2 phase bipolar or 4 phase unipolar
- Able to control the motor half step or full step
- Connected together with L298 to control the stepper motor
- Requires only the clock signal and the direction of motor rotation to move the stepper motor
- Packaging: DIP 20-pin
datasheet http: // zipansion • com / 13NNU

Tantalum 4.7uF / 35V

Tantalum Capacitors 4.7uF / 35V

  • Capacitance 4.7 uF
  • 35V Voltage

Led red color Oval Outdoor Super Bright Diffused 5.2x3.8mm

Led red color Oval Outdoor Super Bright Diffused 5.2x3.8mm
Led Red Oval Outdoor Super Bright Diffused 5.2x3.8mm

Led Wide Angle Water Clear 4.8mm color made by Hewlett Packard

Led Wide Angle Water Clear 4.8mm color made by Hewlett Packard
Led Red (Hewlett Packard) Wide Angle Water Clear 4.8mm

Arduino 101 Starter Kit

The Arduino 101 Starter Kit is a kit
ready-to-use learning that consists of
Arduino 101 microcontroller and some modules
sensors and actuators.
With this kit you will find it easier to learn how Arduino works, the I / O pin function,
communication with Arduino interface,
send and retrieve data from I / O pins,
etc.
In addition to this kit has also been provided
a project guide book containing sample projects and how to program them.

FT245BL chip

Single chip USB to Parallel FIFO 8-bit Converter (lead free).
Single Chip USB to Parallel FIFO bi-directional data transfer. Integrated with 3.3VDC regulator for USB IO. Integrated EEPROM for USB VID, PID, Serial Number, and product description. Supports Bit-Bang mode. Supports OS: Win98 / SE, 2K, ME, Server 2003, XP, Linux, MAC OS-8/9 / X.




  • Power supply 4.4V - 5.25V DC
  • Package LQFP-32
  • USB input interface
  • Number of inputs 1 channel
  • Parallel FIFO output interface
  • Number of outputs 1 channel (8-bit)
  • Features half duplex / full duplex -
  • Data speed Compatible with USB 1.0 and USB 2.0
  • datasheet http: // zipansion • com / wmry

Universal ZIF Socket C40

ZIF Socket for DIP IC
Universal ZIF Socket C40 - ECE (blue color)

Breadboard 400 tie point

Breadboard / project board with a total of 400 holes to install components. Suitable for use as prototyping project tool.

Raspberry Pi 3B Plus Quad Core 1.4GHz ARM CPU Gigabit Ethernet

Raspberry Pi 3B Plus Quad Core 1.4GHz Gigabit Ethernet CPU ARM - United Kingdom Board

Raspberry Pi 3 Model B + is the latest version of the Raspberry Pi 3 series, Pi 3B + has the shape and size identical to Pi 3B, but when compared to Raspberry Pi 3 Model B, Pi 3B + has improved in some hardware parts, from 64- bit which now has a maximum clockspeed of 1.4 GHz (formerly 1.2 GHz on Pi 3B), has Gigabit Ethernet (support PoE) which is certainly much faster than previous versions, has heatsinks on processors for better heat distribution, and supports dual band WLAN 5 GHz and 2.4 GHz.


Specification:
-Broadcom BCM2837B0 chipset
-1.4GHz Quad-Core ARM Cortex-A53, 4 cores
-64 bit CPU
-1GB of RAM
-4 USB 2.0 ports (via LAN7515)
-Gigabit Ethernet (via LAN7515, max speed 300Mbps)
-PoE (power over Ethernet)
-40 pin headers (26 GPIOs)
-MicroUSB power connector
-Dual-band (2.4GHz and 5GHz) 802.11ac Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
-HDMI
-CSI camera interface
-DSI connector for official screen
-3.5mm jack connector Supporting stereo audio and composite video
-2-pin reset header
-Micro SD socket
-One Power: 5V / 2.5A DC

Note: To be able to use PoE feature required PoE HAT module

Robotis Dream II Level 5

ROBOTIS DREAM II Level 5 is the ultimate robotic level kit of the Robotis Dream II series. This kit teaches advanced knowledge about robotics technology from previous kits. This kit can be assembled into 12 different forms of robot that can dikreasikan at will.

Note: This kit requires part of Robotis Dream II Level 1,2,3, and 4 in order to be assembled into a perfect robot model.

Saturday, June 02, 2018

CMPS12 Tilt Compensated Compass Modul

CMPS12 is a compass + IMU sensor module powered by 3 different sensor types. This module is powered by a Bosch 9-axis IMU BNO055 sensor chip which consists of 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer. this module works on a range of flexible power supplies, which is between 3.3 V - 5V. This module also supports 2 types of data communication, ie I2C and serial which can be selected as needed.

Specification:
- Power Supply: 3.3V - 5V @ 18mA
- Resolution: 0.1 Degree
- Accuracy: 1%
- Signal Level: 3.3V, 5V tolerant
- I2C Bus: 400khz
- Serial Baudrate: 9600, 19200, 38400

datasheet http: // zipansion • com / gpu7

Zener 51V 1W 1N4757

Zener 51V 1W 1N4757

  • Diode zener 51V
  • packaging DO-41
  • tension 51 V
  • Power 1 W
  • The input impedance is 1500 Ohm
  • Reverse leakage current 5 uA

Zener 5.1V 500mW SOD-80 Type TZM5231B-GS08

Zener 5.1V 500mW SOD-80 type TZM5231B-GS08
zener diode with a voltage of 5.1 V and a power of 500 mW. Zener diode is widely used in general electronics applications such as power supply devices, amplifier devices, audio video devices, and so forth.

  • SOD-80 packaging
  • Voltage 5.1 V
  • Power 500 mW
  • Leakage of backflow 5 uA
  • datasheet

Kit Smart Home bundle 3

Smart Home Kit bundle 3: TP-Link Smart LED Light Bulb + Echo Dot (2nd Gen) + Wi-Fi Smart Plug HS100 - White

smart home kit consisting of 3 devices, TP-LINK Smart LED Light Bulb, Echo Dot (Gen 2), and TP-LINK Wifi Smart Plug. This kit allows you to control devices such as lights and other electronic devices wirelessly through a smartphone by utilizing the available wifi connection.
Echo Dot (Gen 2) contained in this device also has a very varied function. Echo Dot (Gen 2) allows you to do things like controlling the flame / shutdown of TP-LINK Smart LED Light Bulb and TP-LINK Wifi Smart Plug devices via voice commands, searching for information on the internet, streaming music / radio, setting alarms, asking for weather forecasts and more.


Completeness:
- Echo Dot (2nd Generation) Black
- TP-LINK Wi-Fi Smart Plug HS100 - White
- TP-Link Smart LED Light Bulb, Wi-Fi, Dimmable White, 50W Equivalent, 1-Pack (LB100)

ADC0809 chip

ADC0809 is a 8-bit CMOS succesive approximation ADC.

  • Power supply 5 volts
  • packaging DIP-20
  • parallel interface
  • 8 bit Resolution
  • number of channels 8 input multiplexer channels
  • Data conversion time 100 uS
  • accuracy 1.25 LSB
  • voltage reference 5 VDC, 2.5 VDC, or analog span adjusted
  • datasheet http: // zipansion • com / L5MQ

AD5612AKSZ-2500RL7 chip

AD5612AKSZ-2500RL7 is a 10-bit Digital to Analog Converter 1 channel that can be accessed through serial interface. This DAC IC works at a voltage level of 2.7V - 5.5V with a sampling speed of 17 MS / s.

  • 2.7 -5.5V power supply
  • SC-70-6 packaging
  • Serial interface
  • 10-bit Resolution
  • Number of channels 1
  • Data conversion time 6 us
  • datasheet http: // zipansion • com / KnCp

LM2917N chip

Ic frequency to voltage converter
Specification:
- Supply voltage 28V (absolute maximum rating)
- Output current 180uA
- Built in zener
- Built in op-amp / comparator
- Linearity 0.3% typical
- Voltage Gain 200v / mv
- Packaging: DIP-14
datasheet http: // zipansion • com / KmZv

ADC0820 chip

ADC0820 is an 8-Bit High Speed A / D Converter with Track / Hold Function.

  • Power supply 5 VDC (75 mW max)
  • Packaging DIP-20
  • 8-bit parallel interface
  • 8 bit resolution
  • Number of channels 1 input channel, 8 digital output channels
  • 2.5 us data conversion time (max RD mode), 1.5 us (WR-RD mode)
  • Adjustable reference voltage
  • datasheet http: // zipansion • com / KlrQ

Capacitor Ceramic SMD0402 1PF 50V Type ECJ-0EC1H010C

CAP CER 0402 C0K 1PF 50V (ECJ-0EC1H010C)

  • Ceramic capacitor 1pF with SMD 0402 packing and has C0K temperature coefficient code.
  • 1pF capacitance
  • Voltage 50V
  • Tolerance +/- 0.25pF
  • datasheet http: // zipansion • com / IGRv

Capacitor Ceramic 1.5PF 50V SMD0402 type ECJ-0EC1H1R5C

CAP CER 1.5PF 50V C0K 0402 (ECJ-0EC1H1R5C)

  • Ceramic capacitor 1.5pF with SMD 0402 packing and has temperature coefficient value C0K.
  • Capacitance 1.5pF
  • Voltage 50V
  • Tolerance +/- 0.25pF

  • datasheet: http: // zipansion • com / ILFj

Capacitor Ceramic 15pF 50V NP0 SMD0402 type ECJ-0EC1H150J

Capacitor Ceramic 15pF 50V NP0 SMD0402 type ECJ-0EC1H150J

  • Ceramic Capacitor 15pF with SMD 0402 packing and has NP0 temperature coefficient code.
  • Capacitance 15pF
  • Voltage 50V
  • 5% Tolerance
  • datasheet http: // zipansion • com / IGRv

MX7543JCWE SOIC16 DAC Chip

MX7543JCWE SOIC16 ADC Chip

  • Serial 12-bit DAC input.
  • Unipolar or bipolar configurable.
  • + 5V DC power supply
  • SOIC-16 Packaging
  • 12-Bit Resolution
  • Number of channels 1 input channel, 2 output channels
  • Data conversion time -
  • Accuracy +/- 1 LSB (error)
  • Reference voltage +/- 25V (maximum Vref to AGND)
  • datasheet http: // zipansion • com / IF7L

74HC165

8-bit parallel in-serial out shift register

  • Power supply 2VDC - 6VDC
  • packaging 16-pin DIP
  • Function Converter Parallel to Serial
  • Propagation delay 13 ns
  • Voltage level i / o TTl
  • datasheet http: // zipansion • com / IEi2

1N5226B Dioda Zener 3,3V / 0,5W

Zener diode 3.3V / 0.5W

  • Packaging do-35
  • 3.3V Voltage
  • 0.5W Power
  • The input impedance is 28Ohm (@ 20mA)
  • 25uA backflow leak
  • datasheet http: // zipansion • com / Go80

Photodiode 5mm

Photodiode 5mm
Photodiode with 5mm diameter

Google Home Mini - Smart Speaker and Virtual Assistant

Google Home Mini is a virtual assistant device capable of recognizing, interpreting and executing voice commands from users. Google Home Mini is powered by technology from Google Assistant AI. The technology from Google Assistant allows you to search for a variety of information on the Internet such as news, sports, entertainment, etc. Asking weather forecasts, sets of reminders daily agenda, streaming music from Spotify, YouTube, Netflix, etc., To control the device Smarthome, call sound and much more. Google Home Mini features a built-in speaker with a voice loud enough, so it is convenient to be heard from various corners of the room.