200MHz oscilloscope + 6,000 counts realtime multimeter
Characteristic(Handheld Oscilloscope/ Multimeter)
l Excellent Industrial Design .Direct key for Each Channel ,Time base ,Trigger and DMM,easy to operate.
l Large 5.7 inch TFT Color LCD Display ,Led backlight,Display clearly.
l USB Host/Device 2.0 full-speed interface ,support removeable disk, RS-232/LAN Optional ,Easy to control by PC or long-distance.
l High Bandwidth 200MHz+ 6000 COUNTS high precision DMM.
l High refresh rate，High Real-time Sample Rate 500MS/s, 50GS/s Equivalent-time Sample Rate.
l FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check ,easy to use on production line.
l Multiform Trigger mode ,2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency.
l 1000 waveforms save and record.
l Battery Power Operation (Installed) Industrial Design.
l Save waveform in the following: jpg/bmp graphic file, MS excel/word file.
l Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
l Labview\VB\VC Second Design instance.
Hardware Specification
MODE
|
DSO1200
| ||
VERTICAL
|
Channels
|
2
| |
Bandwidth
|
200MHz
| ||
Rise Time
|
1.7ns
| ||
Input Impedance
|
Resistance: 1M ; Capacitance: 15 pF
| ||
Input Sensitivity
|
10mV/div to 5V/div
| ||
Input Coupling
|
AC, DC and GND
| ||
Vertical Resolution
|
8 bits
| ||
DC Gain Accuracy
|
±3% for Sample or Average acquisition mode
| ||
Maximum Input
|
400V (DC+AC Peak)
| ||
HORIZONTAL
|
Real-Time Sampling Rate
|
500MSa/s
| |
Equivalent Sampling Rate
|
50GSa/S
| ||
Time Base Range
|
5ns/div~1000s/div
| ||
Memory Depth
|
32k at Single Channel, 16k at Dual Channel
| ||
Time Base Precision
|
±50ppm
| ||
TRIGGER
|
Source
|
CH1, CH2
| |
Mode
|
Edge, Video, Pulse Width, Alternative
| ||
Trigger Sensitivity
(Edge Trigger Type) |
1div from DC to 10MHz;
1.5div from 10MHz to 100MHz;
2div from 10MHz to Full;
| ||
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns) |
±(0.3div×V/div) (within ±4 divisions from center of screen)
| ||
X-Y MODE
|
X-Axis Input
|
Channel 1
| |
Y-Axis Input
|
Channel 2
| ||
Phrase Shift
|
Max.3 degree
| ||
CURSORS AND MEASUREMENT
|
Voltage Measurement
|
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot
| |
Time Measurement
|
Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
| ||
Delay Measurement
|
Delay time from ch1 rising edge to ch2 rising edge
| ||
Delay time from ch1 falling edge to ch2 falling edge
| |||
Cursors Measurement
|
Manual, Track, Auto Measure Modes
| ||
Waveform Signal Process
|
CH1+/- CH2, CH1xCH2, CH1/CH2, FFT, Invert
| ||
Storage
|
Storage
|
15 Waveforms and Setups
| |
METER MODE
|
Maximum Resolution
|
6,000 Counts
| |
DMM Testing Modes
|
Voltage, Current, Resistance, Capacitance, Diode & Continuity
| ||
Maximum Input Voltage
|
AC: 600V, DC: 800V
| ||
Maximum Input Current
|
AC: 10A, DC: 10A
| ||
Input Impedance
|
10 MΩ
| ||
DISPLAY
|
TFT LCD Type
|
5.7 Inch with LED Backlight Display
| |
Display Resolution
|
240 (Vertical) x 320 (Horizontal) Dots
| ||
INTERFACE
|
USB
|
USB Host / Device 2.0 Full Speed Supported
| |
Optional
|
RS232, LAN
| ||
POWER SOURCE
|
Line Voltage Range
|
AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA
| |
Battery Power (Installed)
|
6 Hours (Li-ion Battery)
| ||
MECHANICS
|
Dimension
|
245 x 163 x 52 (mm)
| |
Weight
|
1.2Kgs
| ||
Other
|
GND Reference
|
Oscilloscope and Multimeter Independence
| |
Software：
Operating system: Windows 7,Windows NT, Windows 2000, Windows XP ,VISTA
Second Design：
Supply DEMO code (VC、VB、LABVIEW)
