GSM Starter Kit is a technology development module GSM / GPRS-based means of exchanging SIM300C to voice (telephone), data exchange text (SMS) via GSM and exchange data via GPRS. This module is equipped with an LCD 16 characters x 2 lines for the display media. This module has a UART serial interface TTL / RS232. This module can be used for electronic toll-application mobile phone sales, as well as other applications that require data communications over GSM / GPRS network.
Specifications:
* Dimensions: 12 cm (L) x 11.5 cm (W) x 2.6 cm (H)
* Based SIM300C, module GSM Tri-Band: EGSM 900, DCS 1800 and PCS 1900.
* Support SIM card with a voltage of 1.8 V and 3 V.
* Supports GPRS multi-slot class 10, the SIM Application Toolkit features, features Fax and TCP / IP.
* GPRS downlink data transfer speeds up to 85.6 Kbps and a maximum of 42.8 kbps GPRS uplink in normal network traffic.
* Support for speech codec mode with half rate, full rate and enhanced full rate.
* Supports phonebook and SMS storage on the SIM card (Phonebook and SMS number in accordance with the capacity of the SIM).
* Support the PDU and text mode (the setting in software via AT Command).
* Features autobauding, election baud rate automatically.
* Available LCD 16 characters x 2 lines are equipped with LCD contrast regulator.
* There is a button to turn on or turn off the GSM module.
* Available LED indicator for GSM and the GSM module.
* Available as an indicator buzzer rings (incoming call).
* There is a socket for battery Real-Time Clock (RTC) 3V type 'CR2032'.
* Options UART serial interface RS-232 or serial TTL UART fully compatible with PC-Link USBer.
* Available LED status indicators UART serial communication (valid / invalid data).
* Can be connected and controlled directly through the computer serial port.
* Available header for keypad 4 X 4, 4-bit LCD, SPI & Debug.
* Available unuk header I / O with TTL level, can be used to control or indicator GSM module.
* Available 1 channel ADC with a range from 0 to 2.4 VDC is converted to a value of 0-2400.
* Supply voltage 9-12 VDC, equipped with on-board voltage regulator.
* Available RJ-10 connector for connection to the handheld (the receiver) and a port for hands-free.
* Compatible with DT-51 Low Cost series and DT-AVR Low Cost series and support the system microcontroller / microprocessor another.
* There are examples of applications written using Borland ® Delphi ™ and BASCOM-8051 ©.
Equipment:
* 1 piece of GSM Starter Kit board.
* 1 piece handsfree mono (mic + speaker).
* 1 piece of antenna GSM / GPRS (with antenna cable along the ± 1.4 m)
* 1 set of DE-9 serial cable (over 1.25 m)
* 1 sheet Quick Start
* 1 piece of CD which contains a sample application, the program tester, manual and datasheet.
* Dimensions: 12 cm (L) x 11.5 cm (W) x 2.6 cm (H)
* Based SIM300C, module GSM Tri-Band: EGSM 900, DCS 1800 and PCS 1900.
* Support SIM card with a voltage of 1.8 V and 3 V.
* Supports GPRS multi-slot class 10, the SIM Application Toolkit features, features Fax and TCP / IP.
* GPRS downlink data transfer speeds up to 85.6 Kbps and a maximum of 42.8 kbps GPRS uplink in normal network traffic.
* Support for speech codec mode with half rate, full rate and enhanced full rate.
* Supports phonebook and SMS storage on the SIM card (Phonebook and SMS number in accordance with the capacity of the SIM).
* Support the PDU and text mode (the setting in software via AT Command).
* Features autobauding, election baud rate automatically.
* Available LCD 16 characters x 2 lines are equipped with LCD contrast regulator.
* There is a button to turn on or turn off the GSM module.
* Available LED indicator for GSM and the GSM module.
* Available as an indicator buzzer rings (incoming call).
* There is a socket for battery Real-Time Clock (RTC) 3V type 'CR2032'.
* Options UART serial interface RS-232 or serial TTL UART fully compatible with PC-Link USBer.
* Available LED status indicators UART serial communication (valid / invalid data).
* Can be connected and controlled directly through the computer serial port.
* Available header for keypad 4 X 4, 4-bit LCD, SPI & Debug.
* Available unuk header I / O with TTL level, can be used to control or indicator GSM module.
* Available 1 channel ADC with a range from 0 to 2.4 VDC is converted to a value of 0-2400.
* Supply voltage 9-12 VDC, equipped with on-board voltage regulator.
* Available RJ-10 connector for connection to the handheld (the receiver) and a port for hands-free.
* Compatible with DT-51 Low Cost series and DT-AVR Low Cost series and support the system microcontroller / microprocessor another.
* There are examples of applications written using Borland ® Delphi ™ and BASCOM-8051 ©.
Equipment:
* 1 piece of GSM Starter Kit board.
* 1 piece handsfree mono (mic + speaker).
* 1 piece of antenna GSM / GPRS (with antenna cable along the ± 1.4 m)
* 1 set of DE-9 serial cable (over 1.25 m)
* 1 sheet Quick Start
* 1 piece of CD which contains a sample application, the program tester, manual and datasheet.
