Dynamixel X series is the latest series actuator module, which has been widely used for multi-joint robot.
The main difference with the XM430-W210-R series is in the ratio of gear (gear ratio), maximum torque and no-load speed.
Gear ratio XM430-W350-R = 353.5: 1
Dimensions 28.5 x 46.5 x 34 (mm)
Working voltage 10V - 14.8V (recommended: 12V)
Current consumption 2.1A - 2.6A | Standby: 40mA
Maximum rotation speed 46 rpm @ 12V (no load)
Rotate type 360 ° (endless turn)
Digital control type | ST Cortex-M3 (STM32F103C8 @ 72MHz, 32Bit)
Maximum torque of 4.1 N.m at 12V - 2,3A / 41.808364732 kgf.cm (kilogram force centimeter)
IC Driver motor with output transistor. This IC is able to control 2 pieces of motor simultaneously (rotating CW or CCW, short break, stop) with the current for each channel is 1.2A.
Specifications:
- IC power supply: 5VDC (max)
- Motor power supply: 13.5 VDC (max)
- Output current to motor: 1A (1.2A rata2 max)
- Accommodates the PWM signal up to 100kHz frequency.
- Has 2 channels so it can control 2 pieces simultaneously.
- Packaging: 24-lead SSOP.
Specification:
- Supply voltage 12VDC
- Standby current 120mA
- Working current 0mA
- Voltage reference +/- 20%
- Power consumption 1.5W
- Fail safe type (lock as energized)
- Dimension 150x 25x 32
- Weight 430g
- Temperature range -20 to 70 degrees centigrade
Represents a 16 Kb of EEPROM memory packaged in PDIP-24 packaging. IC EEPROM is produced using CMOS technology and is able to retain data up to 10 years.
It is a kebel ethernet Category 5 (CAT 5) produced using high quality materials. This cable has a length of 165 cm and can work at speeds up to 100 MHz. It is suitable for use on intranet / LAN network.
RE295 is a 32-bit ARM microcontroller based barcode scanner engine that uses laser as its scanning device. This device is capable of scanning as many as 200 scans / second and supports USB interface and UART as data access point.
GPS tracking device designed specifically for motorcycles, cars, and other public vehicles. This device works at a voltage level of 9 VDC up to 90 VDC, so in accordance with the general electrical system of the vehicle. This device comes with GSM + GPRS + GPS connectivity which allows you to send and receive data about the position of the device in real-time. This device has also been equipped with several supporting features, such as has met the IP65 standard so that it is resistant to rain and dust spray, supports vibration detection, geo-fence alarm, and long-distance power termination feature.
Switching power supply that serves to convert input voltage 100 ~ 240 VAC into output voltage 12V and current 8.5 A. This device is protected case made from metal, so that more solid and resistant to collision.
Romeo for Intel® Edison is a controller board all-in-one designed for the purpose of development project - project-based IntelRomeo for Intel® Edison Edison and Arduino. Romeo for Intel® Edison is compatible with the Arduino open source platform and Linux, and supports the Java development environment and C. This device allows you to add various kinds of shield and modules, such as switches, LEDs, LCDs, sensors, motors, and servo into A board. Romeo for Intel® Edison also can function as a standalone device to communicate with software such as Flash, Processing, MAX / MSP, or VVVV.
At Romeo for Intel® Edison has also been integrated with L298P motor driver IC. The IC can provide 2-way drive on a DC motor with a maximum current output of 2 amperes. Romeo for Intel® Edison is ideal for robotics applications.
Specification
- Working Voltage: 5V
- Output Voltage: 5 V / 3.3 V
- Input Voltage: 6 - 20 V
- Digital I / O: 14
- I / O Analog: 6
- Flow Per I / O: 10 mA
- Output Current Driver: 2 x 2A
- Dimensions: 100 x 88 x 15 mm
Features:
- Supports SPI programming port
- Supports I²C interface
- Supports 2-way DC motor control
- Supports 43 340 Broadcom 802.11 a / b / g / n dual band (2.4G and 5GHz) Wi-Fi
A wireless switch device that supports inching and self-locking modes. This smart switch device can be controlled by smartphone wirelessly through wifi connectivity, so it is ideal if applied as a smarthome device.
The device also supports manual operation mode, timer, smart scene, and group sharing.
TP-Link Smart LED Light Bulb is a light bulb that has been equipped with wifi connectivity. This device can be controlled using Android smartphone / iOS by utilizing internet network and software called Kasa. The software allows you to control the on / off lights using manual mode, timer, and smart-scene. In addition, the device is also fully integrated with the Alexa Voice Service service, allowing it to be controlled via voice commands.
Specification:
- Working Voltage: 160 - 250 VAC
- Power: 50 W
- Light Color: 2700 K (Warm white)
- Brightness level: 600 lm
- Connectivity: Wifi IEEE 802.11N
- Frequency: 2.4 GHz
- Angle of Beam: 270 degrees
- Lifespan: 13.7 years @ 3 hours / day
- Minimal Specifications: Android 4.1 or iOS 8
- Dimable: Yes
- Compatible With Alexa: Yes
Note: This device does not support light color change!
Echo Dot is a small-sized smart game that can recognize, translate, and execute various voice commands from its users. Echo dot is powered by Alexa Voice Service (AVS) which is a cloud-based Intelegent Personal Assistant service developed by Amazon. The AVS service on Echo Dot allows you to do things using voice commands, for example like playing music, controlling smart home devices, making voice calls, sending / receiving messages, finding information on the internet, streaming music / radio, setting alarms and still much more.
In the audio sector, Echo Dot is equipped with built-in speakers whose voice is quite loud. But if you still feel less, you can expand it using an external audio device via a 3.5 mm audio jack interface and bluetooth.
Sonoff 4 CH is a 4 channel relay device that has been embedded wifi connectivity in it. This device can be used to turn on or off up to 4 pieces of electronic devices at once (lights, fans, air conditioners, etc.) directly from your Android / iOS smartphone wirelessly by utilizing the available internet network. For GUI on smartphones, has provided an application called eWeLink. This app allows you to control Sonof 4CH by using manual mode, timer, smart scene, and voice commands (using Alexa Voice Service). In addition, this device also adopts a DIN rail mount case design, so the installation process to the wall will be easier.
Specification:
- Connectivity: Wifi via ESP8285
- Frequency: 2.4 GHz
- Input Voltage: 90 - 250 VAC
- Input Current: 10 A (max)
- Power: 2200 W (max)
- Channel count: 4
- Work Moisture: 5% - 95%
- Working Temperature: -20 ° C - 75 ° C
Remote ON/OFF–Turn electrical devices on/off from anywhere
App Support –Free iOS and Android mobile App eWeLink
Independent control–Control each gang separately
DIN Rail Mounted– Great for industrial control
Sync Status–Real-time device status provided to App
Share Control–Control your smart home together with your family
Timing–Set scheduled/countdown timers to turn on/off at specified time
Scene–Turn on/off a gang of devices with one tap
Smart Scene–Trigger on/off by temperature, humidity or other environmental conditions
Network Support –Control electronic devices over Wi-Fi or 2/3/4G mobile network
Voice Control –Works perfectly with Amazon Alexa, Google Home(Stay tuned)
Note: To use voice command feature you need to purchase an Amazon Echo device separately
It is a 12 V LED strip with a length of 2 meters and consists of 240 LEDs. LED strip is equipped with waterproofing capabilities and can emit green light with a brightness of 125 lm. It is suitable for lighting, decoration, automotive accessories, and so forth.
Specification:
- Voltage: 12 VDC
- Current: 400 mA
- Power: 4.8 W
- Brightness of Light: 125 lm
- Wavelength: 520 nm
- Angle of Beam: 120 degrees
It is a 12 V LED strip with a length of 2 meters and consists of 240 LEDs. LED strip is equipped with waterproofing capabilities and can emit white light with a brightness level of 350 lm. It is suitable for lighting, decoration, automotive accessories, and so forth.
BN-SZ01 is a smart light that can be controlled easily through Android / iOS smartphone. BN-SZ01 is utilizing wifi connection to connect to smartphone and use eWeLink application as user interfacenya. The app allows you to turn on or off the lights using a timer, manual, or integrate them with the sensor. In addition, BN-SZ01 is also compatible with Amazon Alexa, so you can control the flame of the lights using voice commands.
Socket for IC JEDEC A / B PLCC industry standard with pin number of 44 pins. This socket is equipped with an internal buffer that functions to position each IC foot in order to be in a position that is really precise.
QM20TD-H is an array transistor which consists of 6 darlington transistors that are integrated with each other. QM20TD-H is designed to work at a maximum voltage of 600 V with a current of 20 A. QM20TD-H can be applied to inverter, power switching, air conditioner (AC), CVCF, and so on.
S20 WiFi Smart Socket is a smart socket that comes with standard EU plug. With this device, users can easily convert a conventional plug into a smart plug that can connect to the internet, allowing users to control the flame of the plug via an Android / iOS smartphone whenever and wherever. For the application interface itself has provided a software called eWeLink that you can download through Google Play Store or App Store. By utilizing the application the user can adjust the flame of death of the plug by manual method. Timer, scheduled, and through the Alexa Voice command.
