SecureCOS DUAL / HYBRID Smart Card

SecureCOS DUAL is a remarkable Dual Interface technology Smart Card with strong yet flexible security platform for easy integration into any Smart Card or 2FA implementation at most affordable costing.

This single contact interface model is compliant with ISO7816-3 and supports both T=0 and T=1 protocols. It is compatible to any Smart Card reader that is PC/SC and ISO7816 compliant.

It comes with industry latest Dual Interface technology where on the Contact Interface it complies with ISO7816-3 and supports both T=0 and T=1 protocols; whereas on the Contacless Interface it complies with ISO/IEC 14443A and supports T=CL protocol.

SecureCOS Feature Highlights

•     Contact interface complies with ISO 7816-3, and supports both T=0 and T=1 protocols. Contact
      interface baud rate is 9600 to 115200 bps.
•     Contactless interface complies with ISO/IEC 14443A, and supports T=CL protocol. Contactless
      interface supports the following baud rates: 106 kbps, 212 kbps and 424 kbps.
•     Supports clock stop mode for longer lifespan.
•     Supports for use of different ATR information for cold and warm resets.
•     Hardware-generated random number, and compliance with FIPS140-2.

•     Globally unique hardware ID.
•     Rapid Triple DES algorithm based on hardware.
•     On-chip RSA key pairs generation.
•     Supports for RSA algorithm up to 2432 bits.
•     Supports for ECC algorithm up to 239 bits.
•     4 KV ESD (ElectroStatic Discharge) protections.
•     RoHS compliant.
•     JCOP2.0 and JCOP2.2 (Dual Interface)

SecureCOS Technical Specifications

• Hardware Platform :Secure Microprocessor Smart Card compliance to ISO 7816-3 and FIPS140-2 RNG.
• Processor: 8-bit
• Card Operating System :Own proprietary SecureCOS
• Card Platform:Philip SmartMX Platform, Java Card  2.2.1, GlobalPlatform 2.1.1
• Supported Protocols:T=0 and T=1 (contact); T=CL (contactless)
• Baud Rate: 9600 to 115200 bps (contact); 106kbps,212 kbps and 424 kbps (contactless)
• PKI Middleware:Compliance to PKCS#11 and MS CAPI, hot-pluggable to Internet Explorer, Out-look, Outlook Express, Netscape, Mozilla and Firefox.
• Supported PKI Interface: Active X Control or Java Applet
• Memory Size:72k (50+K for User) EEPROM on SmartChip, 160K ROM
• Certificate Storage:X.509 v3 Certificate Storage
• On-Board Security Algorithms:DES, 3DES, SHA-1, and RSA 2048-bit key pairs generated onboard; true Random generator compliant to FIPS 140-2 certification.
• Chip Security Level:Secured and Encrypted Data Storage
• Electrical:Operating at 5V DC +/- 10% (class A), 3V DC +/- 10% (class B), 1.8V DC +/- 10% (class C); Max supply current < 20 mA; ESD protection < 5KV.
• Operating Temperature :0 C to 70 C (32 F to 156 F)
• Storage Temperature:-40 C to 85 C (-40 F to 185 F)
• Card PVC and RoHS compliance.
• Memory Data Retention : At least 10 years
• Memory Cell Rewrites: At least 100,000 times

SecureCOS PKI Smart Card

SecureCOS is an advanced secure cryptographic Smart Card integrated with our own proprietary SecureCOS (Card Operating System) which is specially designed to support high security level Smart Card and Public Key Infrastructure (PKI) applications. It comes with industry latest Dual Interface technology where on the Contact Interface it complies with ISO7816-3 and supports both T=0 and T=1 protocols.

SecureCOS supports many popular security algorithms such as RSA, DES, 3DES, MD5 and SHA-1. Onboard 1024-bit RSA key pair generation together with built-in advanced cryptographic functions make it a perfect choice for Physical Access combines with PKI and Challenge Response Authentication implementation. As the middleware is designed to compliance with PKCS#11and Microsoft CAPI standards, SecureCOS can be seamlessly integrated into many popular applications such as Internet Explorer, Outlook, Outlook Express, Netscape Communicator, Firefox, popular VPNs and more.

SecureCOS Feature Highlights

• Contact interface complies with ISO 7816-3, and supports both T=0 and T=1 protocols. Contact interface baud rate is 9600 to 115200 bps.

• Supports clock stop mode for longer lifespan.

• Supports for use of different ATR information for cold and warm resets.

• Hardware-generated random number, and compliance with FIPS140-2.

• Globally unique hardware ID.

• Rapid Triple DES algorithm based on hardware.

• On-chip RSA key pairs generation.

• Supports for RSA algorithm up to 2432 bits.

• Supports for ECC algorithm up to 239 bits.

• 4 KV ESD (ElectroStatic Discharge) protections.

• RoHS compliant.

• JCOP2.0

SecureCOS Technical Specifications

• Hardware Platform :Secure Microprocessor Smart Card compliance to ISO 7816-3 and FIPS140-2 RNG.
• Processor: 8-bit
• Card Operating System :Own proprietary SecureCOS
• Card Platform: JCOP2.0 and Compatible to PC/SC reader
• Supported Protocols:T=0 and T=1
• Baud Rate: 9600 to 115200 bps
• PKI Middleware:Compliance to PKCS#11 and MS CAPI, hot-pluggable to Internet Explorer, Out-look, Outlook Express, Netscape, Mozilla and Firefox.
• Supported PKI Interface: Active X Control or Java Applet
• Memory Size:32k (26K for User) on Smart Chip
• Certificate Storage:X.509 v3 Certificate Storage
• On-Board Security Algorithms:DES, 3DES, SHA-1, and RSA 2048-bit key pairs generated onboard; true Random generator compliant to FIPS 140-2 certification.
• Chip Security Level:Secured and Encrypted Data Storage
• Electrical:Operating at 5V DC +/- 10% (class A), 3V DC +/- 10% (class B), 1.8V DC +/- 10% (class C); Max supply current < 20 mA; ESD protection < 5KV.
• Operating Temperature :0 C to 70 C (32 F to 156 F)
• Storage Temperature:-40 C to 85 C (-40 F to 185 F)
• Card PVC and RoHS compliance.
• Memory Data Retention : At least 10 years
• Memory Cell Rewrites: At least 100,000 times

EK-PSK4 350MHz High Bandwidth 4 Ports PS/2 KVM Switch

EK-PSK4 ,350MHz High Bandwidth 4 Ports PS/2 KVM Switch by Edimax

EK-PSK4 Slim Desktop KVM Switch is a very slim and compact KVM Switch that is specifically designed for individual and SOHO use. You can use it to control four computers using only one PS/2 keyboard,video and PS/2 mouse.

EK-PSK4 supports hotkeys, push button and auto scan. Its completed keyboard and mouse emulation for simultaneous PCs boot-up process. The Hot Plug feature let you connect/disconnect PCs without powering down PCs. It provides Audio and Microphone switching function for SOHO and office desktop multimedia application. It allows you to access, control, boot and reboot four PS/2 enabled multimedia computers using only one keyboard, video, mouse and optional speaker set and microphone.

The audio and microphone switching function of EK-PAK4 allows you to leverage the multimedia systems on each of your four computers. You can monitor the audio/mic input/output of each computer without plugging on and off the audio/Mic cables. Furthermore, it offers you user-programmable simultaneous/independent PC and Audio/mic switching function for flexible multimedia and KVM Switching operation. In this way, you can listen to music from one computer while performing other tasks with the other computers.

With its integrated connectors for PS/2 keyboard, video and PS/2 mouse, EK-PSK4 requires special 3-in-1 KVM combo cables (included in the package) for connection with PCs. There will be no more cabling clutters on your desktop.

EK-PSK4 can save your money, space and devices when you need to control 4 PCs. No power supply

and software needed, just plug and play.

Key Features:

• Supports Microsoft Intellimouse, Microsoft Optical Mouse, Microsoft Intellimouse explorer, Logitech Net Mouse…etc..

• Supports Win 98SE/XP/2000, Vista and Linux

• Hot Plug - Connect/Disconnect from PCs without powering down PCs

• PC selection via Push Buttons and Hotkeys (user definable)

• Includes 4 slim PS/2 KVM Combo Cable

• Restores Keyboard status when switching PCs

• LED Display for easy status monitoring

• Buzz sound for switching confirmation

• No Power Adapter And Software Required

SETUP DIAGRAM

Low Cost Telebit Netbook

Low Cost Telebit Netbook,
available colors blue, pink, red, yellow, black, white

Specs:

processor Intel Atom 270, 10" Screen, memory DDR2 1GB, 2.5" HDD size 160GB, Webcam, Wifi, card Reader, Batt 3cell, One year warranty

KVM Switch description

A KVM switch (with KVM being an abbreviation for Keyboard, Video or Visual Display Unit, Mouse) is a hardware device that allows a user to control multiple computers from a single keyboard, video monitor and mouse. Although multiple computers are connected to the KVM, typically a smaller number of computers can be controlled at any given time. Modern devices have also added the ability to share USB devices and speakers with multiple computers. Some KVM switches can also function in reverse - that is, a single PC can be connected to multiple monitors, keyboards, and mice. While not as common as the former, this configuration is useful when the operator wants to access a single computer from two or more (usually close) locations - for example, a public kiosk machine that also has a staff maintenance interface behind the counter, or a home office computer that doubles as a home theater PC.

A user connects a monitor, keyboard, and mouse (and audio if provided for) to the console port on the KVM device and the computers to the other ports.

KVMs can offer different methods of connecting to the computers. Depending on the port density and the type of connection, the KVM may present native connectors on the device where standard cables connect. Another method is a single DB25 or similar connector per port that connects to a special cable which has the video, keyboard and mouse connectors at the computer end. The advantage of the special cable approach is a reduction in the number of cables at the KVM. The disadvantage is the cost of these cables.

Control is switched from one computer to another by the use of a switch or buttons on the KVM device, with the KVM passing the signals between the computers and the keyboard, mouse and monitor depending on which computer is currently selected. Most electronic KVMs allow control to be switched through keyboard commands (such as hitting a certain key, often Scroll Lock, rapidly two or three times) or via an On Screen Display (OSD) menu.

Devices differ in the number of computers that can be connected, with anywhere from two up to 512 computers possible. Enterprise-grade devices can also be daisy-chained to allow even greater numbers of computers to be controlled from a single set of a keyboard, visual display unit and mouse.

A KVM switch is useful where there are multiple computers, but no need for a dedicated keyboard, monitor and mouse for each one. They are frequently used in data centers where multiple servers are placed in a single rack with a single keyboard, monitor and mouse. A KVM switch then allows data center personnel to connect to any server in the rack. A common example of home use is to enable the use of the full-size keyboard, mouse and monitor of the home PC with a portable device such as a laptop, tablet PC or PDA or a computer using a different operating system.

source:http://en.wikipedia.org/wiki/KVM_switch

Mikrotik RouterBoard RB/600 RB600A

Mikrotik RouterBoard RB/600 RB600A complete Extreme Performance Router with 3 - 10/100/1000 ethernet ports and 4 miniPCI slots and RouterOS Level 4

This assembled Mikrotik Routerboard 600A comes complete with case and switching DC power supply and makes a fantastic 3 port 10/100/1000 layer 3 switch and/or router with the option to add up to 4 radio cards. Fully managed with SPI firewall and vpn support. All ethernet ports are fully independent and support 802.1q vlans, and advanced routing protocols including RIPv2 and OSPF. Management from GUI or CLI with access through web, telnet, or ssh.

This powerful Linux based device makes an excellent switch/router/firewall device or a high performance Access Point (with optional radio). Includes a switching DC power supply. The RB/600 is capable of routing 61,400 pps (1500 byte packets with conntrack off). Can also be powered on eth1 by passive POE from 38 to 56 vdc (midspan device - power on unused pairs).

Level 4 RouterOS license included.

Edimax ET-912SC3+ 10/100 to 100FX Single Mode 30KM-SC Fibre Module

Edimax ET-912SC3+ 10/100 to 100FX Single Mode 30KM-SC Fibre Module

The Edimax ET-912SC3+ Media Converter is designed to meet the needs for massive optical fiber network, provide the whole Ethernet / Fast Ethernet network implementation.

Key Features

* Compliant with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX/100BaseFX Standards

* One 10/100BaseTX Ethernet TP Port and One 100BaseFX Ethernet Fiber Port

* One 100BaseFX Fiber Port can support either Multi (SC) or Single (SC) Mode

* TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation

* Providing a slide switch for Full- and Half-Duplex selection on FX Port

* Multiple Fiber Connectors

* Providing 19" Converter Chassis for up to 16 slots with redundant power supply for optional expansion use

Standards

* IEEE 802.3 10BaseT

* IEEE 802.3u 100BaseTX/100BaseFX

Features

* Number of Ports:

o 1 10/100BaseT with RJ-45 Connector

o 1 100BaseFX with Fiber Connector (Multi/Single Mode, SC)

Data Transfer Rate

* Ethernet: 10Mbps/Half-Duplex

* 20Mbps/Full-Duplex

* Fast Ethernet: 100Mbps/Half-Duplex

* 200Mbps/Full-Duplex

Transmission Media

* 10BaseT Cat. 3, 4, 5 UTP/STP, up to

* 100BaseTX Cat. 5 UTP/STP, up to

* 100BaseFX:

o 50/125ƒÊm or 62.5/125ƒÊm Multi Mode SC-Type Fiber optic cable, 9/125ƒÊm or 10/125ƒÊm Single Mode Fiber optic cable

LED Indicators

* Per Port:

o (TX): Link/Act, Speed, FDX/COL

o (FX): Link/Act, FDX/COL

* Per Unit: Power

Power Requirement

* DC5V/2A

Power Consumption

* 10 Watts (Max)

Dimensions

* 102 x 74 x 22mm(L x W x H)

Weight

* 230 g

Operating Temperature

* 0 to 60 deg C

Storage Temperature

* -20 to 90 deg C

Humidity

* 10 to 90% RH (non-condensing)

Certifications

* FCC Class B, CE

ID-12 RFID Modul

ID-12 RFID Modul
RFID reader that is compatible with EM4001 card format / type.

Specifications:
- Distance reading: 12 + cm.
- Frequency 125 kHz.
- Format the card: EM4001 / similar.
- Encoding: Manchester 64-bit, modulus 64.
- Supply: +4.6 to +5.4 VDC.
- Internal antenna

Mifare Card Reader Silver

Mifare Card Reader Silver
a card reader interface Wiegand 26 and work in the frequency of 13.56 MHz.

Specifications:
- Supply Voltage 12V
- Novel design available in silver color
- Mifare Card type
- Wiegand 26 Output
- Read range 3 - 8cm
- Working frequency 13.56 MHz
- Transmit distance is 100m / 1200 m
- Operating temperature-50C-10c

WVC200 Network camera

Linksys Wireless-G PTZ Internet Camera with Audio, WVC200 Network camera- pan / tilt 

The Linksys Wireless-G Pan/Tilt/Zoom Video Camera sends live video through the Internet to a web browser anywhere in the world!

The advanced MPEG-4 video compression produces a high-quality, high-framerate, up to 640x480 video stream. MPEG-4 encoding facilitates good video quality in varying bandwidth environments. WVC200 also supports MJPEG compression for video, providing good video quality at high bandwidth rates.

The comprehensive video features include an IR filter cut which allow you to see the images in low or no light environments when an IR lamp is used. Snapshots (in JPEG format) of the image can be taken and saved. Snapshots can also be scheduled and sent to an FTP server.

If you want the video to be visible from a remote location or from the Internet, you can open an appropriate port on the Router, and then create password protected accounts to manage access to the camera, or leave it wide open for the world to see. Support for Dynamic DNS lets you access your camera using an easy-to-remember "name", even while using a dynamic IP address. The Pan/Tilt and digital zoom function allows you to remotely control the camera movement and focus, giving you maximum flexibility remotely. Up to 10 simultaneous users can have access to the camera at any point in time. Software is included for multiple camera monitoring and recording to your hard drive with advanced search by time and date. Recording can be set up to record by motion trigger, manual or schedule recording and playback on Windows Media Player without the need for a proprietary player.

You can also turn on Security Mode, which tells the camera to send a message with a short video attached to up to three email addresses whenever it detects motion in its field of view. You can then log onto the live video stream if the situation warrants. Wireless security features include WEP and WPA

WVC54GC ip cam by Linksys

WVC54GC : Send live video and audio wirelessly to the Web or networked computers. Whether you’re showing off to the world or checking in with your family, Wireless-G Internet Home Monitoring Camera is designed to be the eyes and ears you need. No computer is required. Excellent for home monitoring.

Technical Specifications

* Model: WVC54GC

* Standards: IEEE 802.11g, IEEE 802.3, IEEE 802.3u

* Ports: Ethernet, Power

* Buttons: Reset

* LEDs: Power

* Cabling Type: Cat5

* Number of Antennas: 1 Internal

* Detachable Antenna: No

* UPnP able/cert: UPnP Advertise

* .Net Support: N/A

* Security Features: WEP-64, WEP-128, WPA, WPA2

* Image Sensor: CMOS

* Lens: Fixed Focus

* Resolution: 640 x 480, 320 x 240, 160 x 128

* Relative Illumination: 5.1 Lux

* Efective Focus: 3 mm

* Sensitivity: 3.0V/Lux-sec

* Field of View: 61.48 degrees

* Compression Algorithm: MPEG-4 and MJPEG

* Record File Format: ASF

* Brightness: Auto/Manual Adjustment

Key Features

* Monitor your home from anywhere in the world via the Internet

* Integrated web server—viewable from most web browsers

* Supports enhanced MPEG-4 and MJPEG compression

* View video from your Wireless-G or wired Ethernet network

* Includes easy-to-use Linksys Home Monitor utility with Snapshot feature

* Motion Detection and E-mail notiication

* Create a database for user authentication

* Supports resolution of up to 640x480 pixels

* Time Stamp and Text Overlay

* Connect up to 4 users simultaneously

* Supports TZO DDNS Service for dynamic IP connection, 1-Year Free Trial

* Multi-platform support—TCP/IP, SMTP (E-Mail), HTTP, DHCP

* Windows-based Setup Wizard for easy setup

* WEP encryption and WPA-Preshared key

* Supports multiple resolution streams—can be used by PC and mobile phone simultaneously

Environmental Details

* Dimensions 3.54” x 4.72” x 1.46” (90 x 120 x 37 mm)

* Weight 0.29 lb (130 g)

* Power 5V 1A

* Certiication FCC, CE, CB, UL, C-Tick, PSB/SPRING, IDA

* Operating Temp. 32 to 104°F (0 to 40°C)

* Storage Temp. -4 to 158°F (-20 to 70°C)

* Operating Humidity 10 to 80%, Noncondensing

* Storage Humidity 0 to 90%, Noncondensing

Minimum Requirements - 1 Camera

* PC with 2 GHz or Faster Processor

* 512 MB RAM

* Microsoft Windows 2000, XP or Vista

* 500 MB of Available Hard Drive Space

* Graphics Card with a Minimum of 128 MB

* Internet Explorer 6.0 or Higher, Mozilla Firefox, and Netscape 7.0 or Higher

* DirectX 9.0 or Higher

* CD-ROM Drive

* Windows Media Player 9 or Higher

Minimum Requirements - Up to 9 Cameras

* PC with 3 GHz Dual-Core Processor

* 1 GB RAM

* Microsoft Windows 2000, XP or Vista

* 4 GB of Available Hard Drive Space

* Graphics Card with a Minimum of 256 MB

* Internet Explorer 6.0 or Higher, Mozilla Firefox, and Netscape 7.0 or Higher

* Cable/DSL Connection for Internet Viewing

* Active-X 8.0 or Higher

* CD-ROM Drive

* Windows Media Player 9 or Higher

WAP54G Access Point

Linksys by Cisco Wireless G Access point WAP54G

Technical Specifications

• Model: WAP54G
• Standards: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
• Ports/Buttons: One 10/100 Auto-Cross Over (MDI/MDI-X) Port, Power Port, Reset and SES Buttons
• Cabling Type: Category 5 (with RJ-45 connectors)
• LEDs: Power, Activity, Link
• Transmit Power: 802.11g: Typ. 13.5 +/- 2dBm @ Normal Temp Range, 802.11b: Typ. 16.5 +/- 2dBm @ Normal Temp Range
• Security features: WPA, Linksys Wireless Guard (available in US and Canada only), WEP Encryption, MAC Filtering, SSID Broadcast Enable/Disable
• WEP Key Bits: 64/128-Bit

Key Features

• IEEE 802.11g supports data rates up to 54Mbps
• Backwards compatible with existing IEEE 802.11b devices
• Easy wireless coniguration with SecureEasySetup push button
• Supports WPA security and 64/128-bit WEP encryption
• Built-in web UI coniguration for easy coniguration from any Web-browser
• Firmware upgradable through web browser
• Supports Wireless Bridging, Wireless Repeater, MAC Address Filtering, and Event Logging

Environmental Details

• Dimensions 7.32” x 1.89” x 6.65” (186 x 48 x 169 mm)
• Weight 1.01 lbs (460 g)
• Power External, 12V DC
• Certiication FCC, CE, Wi-Fi (802.11b and 802.11g)
• Operating Temp. 32 to 150ºF(0 to 40ºC)
• Storage Temp. -40 to 185ºF (0 to 70ºC)
• Operating Humidity 10 to 85% Noncondensing
• Storage Humidity 5 to 90% Noncondensing

Nanostation 2 by UBNT

UBNT Nanostation2 The Ultimate CPE for the Global WISP Community

NanoStation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Reliable System Performance

NanoStation has been proven in extreme temperature and weather conditions. Additionally, it has advanced ESD/EMP immunity design to protect against common outdoor radio and ethernet failures and eliminate truck-rolls for carriers.

Processor Specs: Atheros AR2315 SOC, MIPS 4KC, 180MHz

Memory Information: 16MB SDRAM, 4MB Flash

Networking Interface :1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

Approvals :FCC Part 15.247, IC RS210

RoHS Compliance: YES

Antenna :Integrated antenna array + External RP-SMA

Power Supply: 12V, 1A (12 Watts). Supply and injector included

Power Method :Passive Power over Ethernet (pairs 4,5+; 7,8 return)

Operating Temperature :-20C to +70C (System PCB optimized for hi-temp)

Weight :0.4 kg

Kenbotong TDJ-2325 spl9

Kenbotong TDJ-2325 spl9 

ISM 2.4 GHz 24 dBi kenbotong Grid Antenna with extended Frek.2.371~2.523 GHz.

FGA-2424 G Finetic Gold Grid Antenna w/ Extended Frequency (2.371~2.523 GHz)

FGA-2424 G

Finetic Gold Grid Antenna w/ Extended Frequency (2.371~2.523 GHz), Low cost high quiality grid antenna.

Finetic FGA-2424E

Finetic FGA-2424E

2.4 GHz 24 dBi Finetic Platinum Grid Antenna w/ Extended Frequency (2.371~2.523 GHz)

Edimax SB2200G Wireless LAN 802.11b/g Indoor Signal Booster

Edimax SB2200G - Wireless LAN 802.11b/g Indoor Signal Booster

Features:

* Work with IEEE 802.11g and 802.11b wireless LAN devices.

* Stronger output power improves the link quality and coverage distance of WLAN devices significantly.

* 500/200/100mW output power changeable enables the booster to be used for various environments.

* Provide extend cable with 75 cm length for AP re-location

Specifications

Key Features Work with IEEE 802.11g and 802.11b wireless LAN devices. Stronger output power improves the link quality and coverage distance of WLAN devices significantly. 500/200/100mW output power changeable enables the booster to be used for various environments. Provide extend cable with 75 cm length for AP re-location

Model NO. SB-2200g Standards IEEE 802.11g/b Frequency Range 2.4GHz ~ 2.5GHz Connector Reverse SMA Jack x 2 Output Power  500/200/100mW Transmitter Input Power 4dBm~ 13dBm (Max.) Receive Input Power  -16Bm (Max.) Receiver Gain 12dB typical Temperature 32-131ºF (0-55ºC) Humidity   10~95% (Non-Condensing) Certification FCC, CE

1 Watt Outdoor 802.11b/g Hyperlink Amplifier - HA2401GX-1000

1 Watt Outdoor 802.11b/g Hyperlink Amplifier - HA2401GX-1000

HyperAmp® HA2401GX-1000 amplifiers are compatible with 802.11g (b/g) wireless LAN equipment. Hyperlink's Active Power Control circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length.

The HyperAmp® HA2401GX-1000 series improves range by delivering full transmit power directly at the antenna where it is most effective. In addition the unit's receive gain compensates for cable losses. The unit can be configured to deliver the full transmit power with as little as 1 mW of input power, permitting cable runs of several hundred feet with no degradation in operating range.

Outdoor Model

The HA2401GX models feature rugged, cast aluminum weather-proof construction to ensure years of reliable operation in the harshest environments. The integral mast mount gives this amplifier superior strength as well as simplifies installation. Included with the outdoor models, the DC Power Injector provides power to the HyperAmp® through the antenna cable, simplifying installation. Current-sensing circuits provide remote amplifier diagnostic LEDs. In addition, this unit provides effective lightning protection with multi-strike capability.

Power Supply

The power supply included with the amplifier is rated at 100-240 VAC @ 50/60 Hz allowing it to be used in the US as well as in the EU when used with the optional PSX-EU2 Plug converter (US NEMA 6-15R Flat Blades to EU 4/4.8 mm round pins).

Specifications

Transmit Power	1 Watt (30 dBm)
Receive Gain	20 dB nom
Frequency	2400 - 2500 MHz
Max. Input Power	100 mW (20 dBm)
Water Resistant Rating (Outdoor Models)	IEC 60529 IPX7
Operating Mode	Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode
Operating Temperature	-40°C to 50°C (-40°F to 122°F)
Dimensions	5.9 x 2.5 x 1.3 (inches) 150 x 64 x 33 (mm)
Weight	.95 lbs. (.44 Kg)
Current Draw	1.25A Peak Tx and 0.14A Peak Rx
Supply Voltage	12VDC  -0.5V / +1V

5 Watt 2.4 GHz Indoor 802.11g (b/g) WiFi Amplifier - HA2405GTI-NF

5 Watt 2.4 GHz Indoor 802.11g (b/g) WiFi Amplifier - HA2405GTI-NF

HyperAmp® GTI series are high power versions of Hyperlink's indoor RF amplifiers (Booster) for 2.4 GHz spread spectrum wireless LANs. High power and excellent linearity make it the highest performance wireless LAN amplifiers available today. These WiFi amplifiers are compatible with 802.11g and 802.11b wireless LAN equipment. Hyperlink's APC (Active Power Control) circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length. Consisting of a receive amplifier and a transmit power amplifier, the HyperAmp® GTI series installs indoors near the radio itself, combining ease of installation with significant improvement in operating range and performance.

17dB Receive Gain

HyperAmp® "GTI" series WiFi amplifiers increase range by providing transmit gain as well as 17 dB of receive gain (up to 28 dB available). This receive gain actually increases the receive sensitivity of most wireless LAN radios. This unit can be configured to deliver full transmit power with as little as 5 mW of input power. This feature permits cable runs of several hundred feet with no degradation in operating range.

Our design features 10W FET allowing these amplifiers to deliver full rated linear output in 802.11g mode.

The HyperAmp® GTI amplifier features a heavy-duty enclosure machined from a single block of aluminum making it suitable for demanding commercial and military applications.

Streaming Media Ready

WiFi components used in a Streaming Video or Audio system work harder than ones carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwave devices are very sensitive to the heat generated from operating at high duty cycles. Most amplifiers, or for that matter many Radios, cannot pass Streaming Media content for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self destruct or have their lifespan diminished. It would be the equivalent removing the Heatsink or Fans from your PC.

Hyperlink Technologies "Streaming Media Ready" amplifiers were designed from the start to survive the extreme conditions that Streaming Media imposes on an amplifier. Using proprietary heatsinking techniques, Hyperlink's Streaming Media amplifiers will remain at a safe operating temperatures for the most demanding Streaming Media applications, without the need for cumbersome heatsink plates, fins or fans.

Specifications

Transmit Power 5 Watt (37 dBm)

(10W FET)

Frequency 2400 - 2500 MHz

Receive Gain* 17 dB (up to 28 dB available)

Operating Mode Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode

Dimensions (L x D x H)

*excluding connectors 7.25 x 4.25 x 2.12* (inches)

184 x 108 x 54* (mm)

Weight 1.7 lbs. (.77 kg)

Current Draw 3.6A Peak Tx and 0.14A Peak Rx

Supply Voltage 12VDC -0.5V / +1V

Environmental Protection IP65

Operating Temperature -40°C to 50°C

(-40°F to 122°F)

LINKSYS Switch 5-Port 10/100/1000MBPS - SD2005

LINKSYS Switch 5-Port 10/100/1000MBPS - SD2005

Description

The 5-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements. Either way, it's perfect for graphics, multimedia, and other applications that have to move large files across the network quickly.

Technical Details

* Five 10/100/1000Mbps, half/full duplex, switched ports. Forwards and filters packets at non-blocking, full wire speed. All ports have auto speed negotiation and auto MDI/MDI-X crossover detection. Linksys reliability and limited lifetime warranty.

* Security Slot. Environmental Dimensions (W x H x D) 130 mm x 30 mm x 127 mm (5.12" x 1.18" x 5.00") Unit Weight 14.99 oz. (0.425 kg). Power Input DC 12 V/1.5 A.

Xilinx board and kit

Xilinx Board and Kits for design, prototyping and pilot project.

• Spartan-3
• Spartan-6
• Virtex-5
• Virtex-6

Cisco 1721 , modular router

The Cisco 1721 is a modular router optimized for data-access applications, providing businesses with the most complete functionality and flexibility to deliver secure Internet and Intranet access. The router offers a wide array of WAN access options, high-performance routing, Quality of Service, inter-virtual LAN routing, and VPN access with firewall options. Powered by Cisco IOS, the Cisco 1721 offers high reliability and flexibility of interchangeable WAN interface cards, comprehensive security that includes hardware-assisted VPN encryption and a stateful inspection firewall, and business-class DSL with enhanced quality of service to ensure high-performance levels are guaranteed.

Key Benefits:

* Cost-effective modular device optimized for data-access applications

* Offers a wide array of WAN access options, high-performance routing, VLAN routing, and VPN access with firewall options

* Offers business-class DSL through ADSL and G.SHDSL technologies with enhanced QoS

Ready stock configuration:

• Cisco 1721 16/32, 1-Port Serial, 1-Port FastEth
• Cisco 1721 16/32, 1-Port Eth, 1-Port FastEth
• Cisco 1721 16/64, 1-Port Fast Eth, 4-Port Switch 10/100.
• Cisco 1721 16/64 VPN, 1-Port Fast Eth, 4-Port Switch 10/100.

10/100TX RJ-45-100FX Sc 2PORT Unmanaged Sw with enhanced Msnglink

10/100TX RJ-45-100FX Sc 2PORT Unmanaged Sw with enhanced Msnglink

AT-FS232 Fast Ethernet Media Converter converts 10/100TX to 100FX (SC) multimode fiber standalone media and rate converter. AT-FS232 Fast Ethernet bridging media converters are two port, unmanaged and standalone.

Tech Spech:

Product Type Media Converter

Dimensions 1" Height x 4.12" Width x 3.75" Depth

Interfaces/Ports 1 x RJ-45 1 x SC

Form Factor External

Wall-mountable

Product Model AT-FS232

Network Technology 10/100Base-TX ,100Base-FX

Product Series AT-FS200

Management IEEE 802.1Q VLAN

Distance Support 1.24 Mile

Maximum Distance Support 1.24 Mile

Features:

o Fan-less design

o Auto MDI/MID-X Copper Port

o Fiber Link Test Function

o Smart Missing Link Support

Spider Hexapod robot kit MSR-H01

MSR-H01 is a 3 Degree Of Freedom hexapod kit consisting of 26 precision laser-cut 5053 aluminum body and leg components in one of three anodized colors: Silver, Red or Black. The kit comes with all screws, stand-offs, nuts and bolts for assembly (servos, electronics and batteries are not included).

The M3 & M4 machine screws included are high quality, stainless steel, hexagon button head type, with steel hexagon stand-offs. The top body plate has mounting holes for a p.Brain-SMB or SSC32 controller. With the electronics mounted underneath the top body plate, there is still enough room within the body for a 5 cell Sub-C battery pack. An optional PP3 battery holder can be fitted within the body frame for a clean, logic power supply. At the front of the hexapod there is a servo mounting point for an optional pan/tilt head.

Dimensions when standing: 280mm x 320mm x 175mm (LxWxH)

One aspect that lets many robot kits down is the control electronics, MSRL are pleased to announce the release of the p.Brain-HexEngine: with the HexEngine electronics & firmware, taking control of your hexapod has never been easier. The HexEngine can be configured using a PC serial port & terminal software, and comes with default settings for the MSR-H01 kit for fast configuration. Once configured controlling your hexapod can be achieved via a serial link using a separate controller such as a basic stamp, or over an optional bluetooth link from a remote system. Further information: HexEngine product, Hexengine information,

OEM Character LCD 8x2

OEM Character LCD 8x2

Technical Specifications:
- Number of Character = 8 char x 2 line
- Dimension = 58 x 32 x 13.3 mm
- Dot Size = 0.56 x 0.66 mm
- Character Size = 2.96 x 5:56 mm
- Backlight Type = none
- LCD Type = STN, Reflective, Positive, Yellow Green
- Driver = HD44780/compatible

Samsung Large Character LCD 20x2

Samsung Large Character LCD 20x2

20x2 Character LCD

Specifications:

- 5VDC power supply
- Interface: Parallel 8-bit / 4-bit
- Integrated backlight
- Exists at the control pin RS, R / W, Enable
- LCD contrast settings using the ICL7660 (+5 VDC)

ACR880 GPRS Portable Smart Card Terminal

ACR880 GPRS Portable Smart Card Terminal

The latest addition to the PIN-pad reader product line, the ACR880 GPRS Portable Smart Card Terminal is a smart card device that secures and streamlines various transactions using smart card technology. This innovative device is capable of facilitating secure mutual authentication between a card and a reader, detailed multi-layered information from the cards based on embedded access rights, and transactions through both private and public network infrastructures.

Attached to its cradle, ACR880 functions as a powerful desktop device with a modular design, and may be attached to and work with other peripherals like magstripe readers and thermal printers. Its Secure PIN Entry (SPE) feature ensures that every PIN code entered into the device is secured and protected from various security threats that attack PC’s and workstations. Detached to its cradle, it becomes a standalone and handheld reader that may be used in field works without compensating any of its functionalities. Further, its GPRS connectivity makes data transmission possible even with the reader on standalone mode. This makes the ACR880 GPRS Portable Smart Card Terminal ideal for various solutions in the e-healthcare, e-government and e-administration sectors.

Other features of ACR880 include a dual smart card interface, contactless card reader module, USB and RS232 connectivity, integrated TCP/IP networking support, multiple SAM slots, a 128x64 high resolution graphical LCD, a user-friendly 20-button keypad, multiple bi-colored status LEDs, a highly-audible speaker and a real-time onboard clock. It allows addition of features like high speed WiFi access and biometric fingerprint sensor, and enables firmware upgrades to guarantee against obsolescence in the face of future security systems.

Features:

* 32-Bit ARM 9 Processor running on Embedded Linux

* 32MB Flash and 32MB SDRAM Memory

* Dual Operation Modes (PC-Linked/Standalone)

* Long Battery Life for All Day Use

* Charging via Docking Cradle

* Dual Interface Reader (Contact and Contactless)

* USB Host & Client Full Speed/Serial/Ethernet Interface

* GPRS/GSM Quad Band (850, 900, 1800, 1900 MHz)

* 2 Full-Sized Contact Card Slots (Landing Connector)

* 2 SAM-Sized Card Slots (Contact Connector)

* Firmware Upgradability

* Handheld Size and Weight

* Easy-to-Read, High Resolution Backlit LCD

* Highly Durable Chemical Resistant 20-Button Keypad

* 4 LED Status Indicators

* Built-in Speaker

* Tamper Detection Switch to Protect Against Unauthorized Intrusion

* Real-Time Clock (RTC) with Independent Backup Battery

* Secure PIN Entry (SPE) Support

* PPS (Protocol And Parameters Selection) Support with 9,600—230,400 Bps in Reading and Writing Smart Cards

* (Optional) Built-in Fingerprint Sensor

* (On Request) WiFi

* (On Request) Colored LCD

* (On Request) Internal Microphone

* (On Request) Cigarette Lighter Adapter

Tech Specs:

Dimensions Device: 88.00mm (L) x 186.00mm (W) x 36.00mm (H); Cradle: 153.00mm (L) x 157.00mm (W) x 88.00mm (H)

Weight Device: 348g (with battery); Cradle: 613g

Processor 32-Bit Arm 9 Processor

Operating System Embedded Linux 2.6

Memory 32MB Flash + 32MB SDRAM

Interface USB Full Speed Host and Client, Serial RS232 & Ethernet Interface to PC

Power Supply

* Supplying Voltage: 12V

* Supplying Current: max 1A

* Source: External Power Adapter

Supply Voltage +12V Maximum 1A from External Power Adapter

Supply Current Max 1A

CLK Frequency 4 MHz

Compliance/Certifications

* EMV 2000 v4.0 Level 1, CE, FCC, RoHS, ISO-7816, ISO-14443, PC/SC

Application:

* e-Healthcare

- Medical Identification

- Digital Signatures

- Digital Prescriptions

- Patient Data and History

- Billing Transactions

* e-Government

* e-Banking and e-Payment

* Transportation

* Loyalty Program

* Time and Attendance Checking

eH880 Secure Smart Card Terminal

eH880 Secure Smart Card Terminal

The eH880 Secure Smart Card Terminal is a secure and feature-rich smart card terminal primarily dedicated to the global electronic healthcare market. This innovative device is capable of facilitating secure mutual authentication, between a doctor’s and a patient’s card, for instance; displaying detailed multi-layered information from one or both cards, based on embedded access rights; and facilitating transactions through both private and public network infrastructures.

Features of the groundbreaking eH880 include a dual smart card interface, contactless card reader module, USB and RS232 connectivity, integrated TCP/IP networking support, multiple SAM slots, a 128x64 high resolution 2.3-inch black and white graphical LCD, a durable user friendly 20-button keypad, multiple bi-colored status LEDs, a highly effective audible speaker, and a real time onboard clock.

eH880 supports Secure PIN Entry (SPE), which entails secure entry of every PIN code into the device’s PIN pad, thus eliminating exposure of sensitive information to PC’s and workstations that are vulnerable to security attacks such as Trojans and USB Sniffers.

This highly efficient tool can also host additional features like high speed WiFi access and optional biometric fingerprint sensor, which provide unmatched usability and compatibility within any current or future system. Most importantly, eH880 has an easily upgradeable firmware, which would enable the device to adapt to the changing needs of future security systems.

Features:

* 32-Bit ARM 9 Processor running Embedded Linux

* 32MB Flash and 32MB SDRAM Memory

* Dual Operation Modes (PC-Linked/Standalone)

* Dual Interface Reader (Contact and Contactless)

* USB Full Speed/Serial/Ethernet Interface

* 2 Full-Size Contact Card Slots (Landing Connector)

* 2 SAM-Size Card Slots (Contact Connector)

* Firmware Upgradeable

* Easy-to-Read, High Resolution Backlit LCD

* Highly Durable Chemical Resistant 20-Button Keypad

* 4 LED Status Indicators

* Built-in Speaker

* Tamper Detection Switch to Protect Against Unauthorized Intrusion

* Real-Time Clock (RTC) with Independent Backup Battery

* Support Secure PIN Entry (SPE)

* Support PPS (Protocol And Parameters Selection) with 9,600—230,400 Bps in Reading and Writing Smart Cards

* (Optional) Built-in Fingerprint Sensor

* (On Request) Wifi

* (On Request) Color LCD

* (On Request) Internal Microphone

Technical Specs:

Dimensions 164.00mm (L) x 180.00mm (W) x 88.00mm (H)

Weight 766g

Processor 32-bit Arm 9 Processor

Operating System Embedded Linux 2.6

Memory 32MB flash + 32MB SDRAM

Interface USB Full Speed Host and Client, Serial RS232 & Ethernet interface to PC

Power

* Supplying Voltage: 12V

* Supplying Current: max 1A

* Source: External Power Adapter

Supply Voltage + 12V maximum 1A from external power adapter

Supply Current max. 50mA

CLK Frequency 4 MHz

Compliance/Certifications

EMV 2000 v4.0 Level 1, CE, FCC, RoHS Compliant, ISO-7816, ISO-14443, PC/SC

Application:

* Electronic Healthcare – medical identification, digital signatures, digital prescriptions, patient history, billing

* Electronic Government

* Secure Electronic Payment

* Customer Loyalty

* Secure Home-banking

* Time and Attendance