5 Watt 2.4 GHz Indoor 802.11g (b/g) WiFi Amplifier - HA2405GTI-NF
HyperAmp® GTI series are high power versions of Hyperlink's indoor RF amplifiers (Booster) for 2.4 GHz spread spectrum wireless LANs. High power and excellent linearity make it the highest performance wireless LAN amplifiers available today. These WiFi amplifiers are compatible with 802.11g and 802.11b wireless LAN equipment. Hyperlink's APC (Active Power Control) circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length. Consisting of a receive amplifier and a transmit power amplifier, the HyperAmp® GTI series installs indoors near the radio itself, combining ease of installation with significant improvement in operating range and performance.
17dB Receive Gain
HyperAmp® "GTI" series WiFi amplifiers increase range by providing transmit gain as well as 17 dB of receive gain (up to 28 dB available). This receive gain actually increases the receive sensitivity of most wireless LAN radios. This unit can be configured to deliver full transmit power with as little as 5 mW of input power. This feature permits cable runs of several hundred feet with no degradation in operating range.
Our design features 10W FET allowing these amplifiers to deliver full rated linear output in 802.11g mode.
The HyperAmp® GTI amplifier features a heavy-duty enclosure machined from a single block of aluminum making it suitable for demanding commercial and military applications.
Streaming Media Ready
WiFi components used in a Streaming Video or Audio system work harder than ones carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwave devices are very sensitive to the heat generated from operating at high duty cycles. Most amplifiers, or for that matter many Radios, cannot pass Streaming Media content for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self destruct or have their lifespan diminished. It would be the equivalent removing the Heatsink or Fans from your PC.
Hyperlink Technologies "Streaming Media Ready" amplifiers were designed from the start to survive the extreme conditions that Streaming Media imposes on an amplifier. Using proprietary heatsinking techniques, Hyperlink's Streaming Media amplifiers will remain at a safe operating temperatures for the most demanding Streaming Media applications, without the need for cumbersome heatsink plates, fins or fans.
Specifications
Transmit Power 5 Watt (37 dBm)
(10W FET)
Frequency 2400 - 2500 MHz
Receive Gain* 17 dB (up to 28 dB available)
Operating Mode Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode
Dimensions (L x D x H)
*excluding connectors 7.25 x 4.25 x 2.12* (inches)
184 x 108 x 54* (mm)
Weight 1.7 lbs. (.77 kg)
Current Draw 3.6A Peak Tx and 0.14A Peak Rx
Supply Voltage 12VDC -0.5V / +1V
Environmental Protection IP65
Operating Temperature -40°C to 50°C
(-40°F to 122°F)
