Expansion Shield X300 is a one of the most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.
Features
- Input Voltage: 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
- SATA: Allows you to connect SATA devices to your Raspberry Pi
- Audio:
1> 3.5mm MIC in jack
2> 3.5mm stereo audio jack
3> SPDIF output
4> Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2) - Wireless:
1> WiFi (IEEE 802.11b/g/n) with external antenna
2> IR sensor (38KHz)
3> Bluetooth serial communication - USB Storage: Self-powered USB hub with 3 ports
- Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
- Misc:
1> Power output socket
2> Camera flex slot so camera can still be used with the expansion board attached
3> DIP switch to remove connection from RPi’s pin header
4> Directly connected on top of the Raspberry Pi using the board GPIO header pins
5> No wiring nor soldering is required
6> Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
7> Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B Dimensions: 85 x 56mm (Same size as Raspberry Pi)
