Protek 6510C 100MHZ dual channel Analog Osciloscope
Features
1. Four traces may be simultaneously displayed in ALT-sweep
2. Five vertical display modes: CH1, CH2, Dual, Add, Subtract
3. Vertical mode triggering for displaying 2 unrelated signals
4. Trigger hold-off circuit for synchronizing complex waveforms
5. Sweep speeds to 2nS/ Div
6. 12kV acceleration voltage for bright displays of low duty cycle signals
7. Z axis input
8. TV Synchronization for either line or field patterns
9. 20MHz bandwidth limit switch for triggering signals in a noisy environment
Product Information
100 MHz 2Ch. Dual Time Base with Alt Mag.
Specifications
Vertical Amplifier ( CH 1 and CH 2)
a) Sensitivity : 5 mV/ Div to 5 V/ Div in 7 calibrated steps, ( X5 Mag 1mV/ Div to 1 V/ Div)
b) Accuracy : 3% ( 5% in X5 Mag)
c) Bandwidth ( -3dB) : DC to 100MHz
d) Rise Time : 3.5 ns, X5 Mag: 20MHz Bandwidth: 17 ns
e) Input Impedance : 1MW + 25 pF
f) Input Coupling : AC-Gnd-DC
g) Invert Channel : CH2
h) Display Modes : CH1, CH2, Add, Subtract, Dual ( Alt/ Chop)
i) Maximum Input Voltage : 400V ( DC or AC peak)
j) CH1 Signal Output : 20mV into 50W
Horizontal Sweep
a) Timebase A - Sweep Time : 50ns/ Div to 0.2 s/ Div in 21 calibrated steps ( 1-2-5)
b) Timebase A - X10 Mag : 5ns/ Div to 20ms/ Div
c) Timebase A - Accuracy : 3% ( 5% in X10 Mag)
d) Timebase A - Hold Off : Continuously adjustable to > 2X sweep time
e) Timebase B - Sweep Time : 50ns/ Div to 10 s/ Div in 8 steps ( 1-2-5)
f) Timebase B Accuracy : 3%
g) Timebase B - Delay Time : Continuously variable from 0.2 s to 2s
h) Timebase B - Delay Modes : Continuous or triggered
i) Timebase B - Sweep Displays : A, B, A alt B, B triggered, X-Y
X-Y Mode
a) CH1-X axis, CH2-Y axis Sensitivity : Same as CH1 vertical amplifier
b) Bandwidth ( X-axis) : DC to 2MHz
c) Phase Error : 3 DC to 10kHz
Triggering
a) Trigger Modes : Auto, Normal, TV-V, TV-L
b) Source : Int. CH2, line ext.
c) Coupling : AC
