Thursday, April 02, 2009

DT-HiQ Programmer

DT-HiQ Programmer equipped under Windows® software that programmer friendly and ease of use.

Starting on serial number 51.24.586 DT-HiQ Programmer can programming for microcontroler ATtiny2313, ATmega16(L), ATmega162(V), EEPROM serial 24C, 25, and 93C, and EEPROM 28C.

Dimension: 125 mm (Long) x 105 mm (Wide) x 30 mm (Thick)

Technical Specs DT-HiQ Programmer:
- Microcontroler MCS-51® support:
AT89C51, AT89C52, AT89C55 (programming voltage 5V, 12V supported), AT89LV51, AT89LV52, AT89LV55, AT89C1051(U), AT89C2051, AT89C4051, AT89(L)S51, AT89(L)S52, AT89(L)S53, AT89(L)S8252, AT89C51RC, AT89C55WD.
- Variant AVR 8-bit supported : AT90S1200, AT90S2313, ATtiny2313, AT90S8515, AT90S8535, ATmega8515(L), ATmega8535(L), ATmega16(L), ATmega162(V).
- Serial EEPROM supported 24C: 24C01(A), 24C11, 24C02(A), 24C04(A), 24C08(A), 24C16(A), 24C164, 24C32(A), 24C64(A/B), 24C(S)128, 24C256, 24C512, 24C1024.
- Serial EEPROM supported 25: 25010A, 25020A, 25040A, 25080A, 25160A, 25320A, 25640A, 25128A, 25256A.
- Serial EEPROM supported 93C: 93C46(A/C), 93C56(A), 93C66(A), 93C86(A).
- EEPROM supported 28C: 28C010, 28C040, 28C16, 28C64(B), 28C256.
- supply Voltage 12 V DC with 200 mA consumption
- UART RS-232 interface with DB9 connectort, baudrate 57.600 bps
- flexible ZIF socket, ease for maintaince chips for programming.
- converter socket for IC microcontroler AVR® 40 pin DIP - 0.6" and IC microcontroler 20 pin DIP - 0.3"
- Converter socket for IC EEPROM sold separately.
- Equipped with programmer software on Windows® 95/98/2K/ME/XP/NT®/Vista .
DT-HiQ Programmer Equipments:
- 1 pcs Board of DT-HiQ Programmer
- 1 set Converter Socket for MCS-51® 20-pin, 8-bit AVR® 20 pin, dan 8-bit AVR® 40 pin.
- 1 pcs Adapter Voltage 220 VAC to 12 VDC ( Optional)
- 1 set serial RS-232 cable
- 1 sheet Quick Start DT-HiQ Programmer
- 1 pcs CD software DT-HiQ Programmer