20MHz Analog Oscilloscope
Main Features:
• Auto sweep circuit in full frequency bandwidth in trigger system
• Flexible trig mode to selelect one signal or external input signal trig
• Alt trig function to observe two different signal synchronized
* Trig output and output the signal of CH1 & CH2
Vertical Deflection
- Operation Mode CH1, CH2, Alt, Chop, ADD, X-Y
- Sensitityity 5mV/diy,‘,10V/div 1-2-5 step, 11 calibrated steps; ±5%
- Frequency Bandwidth DC: 0,-20MHz -3dB/ AC: 10Hz-20MHz -3dB
- Frequency Bandwidth x 5 MA DC: 0,-5MHz -3dB / AC: 10Hz,u5M1-1z -3dB
- Input Impedance 1±50/0MW/530pF(direct) 10±50/0M01/523pF(yia probe)
- Rise Time 518ns
- Max. Input Voltage 400V (DC+AC Peak)
- Input Coupling System AC-GND-DC
Horizontal Deflection
- Sweep Mode : Auto, Trig, Trig Lock, Single Time
- Sweep Rate : 0.1ps/div-0.2s/div±50/0, in 20 calibrated steps (1-2-5 squ.)±5%
- Expansion : x 5 error ±10%
Trigger
- Trigger Source : CH 1,CH2,Alt,Line, Ext
- Trigger Coupling : AC/DC(ext) Normal/TV
- Polarity : + , -
- Sync frequency: Auto 50Hz-,20MHz
X-Y Operation
- Operation Mode. X: CH1, Y:CH2
- Deflection As vertical axis
- Frequency response AC: 10Hz-1MHz -3dB; DC: 0-1MHz -3dB
- Input Impedance 1MOhm +/- 2% , , 25pF +/- 3pF
- Phase Difference 3°(DC-50kHz)
Z axis
- Input Impedance 10k0.
- Max. Input Voltage 50V(DC+AC Peak)
- bandwidth DC-5MHz
General Information
- CRT: 6 inch square internal scale, 8x10cm (1cm= ldiv)
- Power Voltage 220V±10% or 110V±10%
- Dimension :320(H)x130(W)x400(D) mm
- Weight :Approximate: 7.2Kgs
Specification is correct at the time of printing, and will change without prior notice
