NXP LPC-P11C24
DEVELOPMENT PROTOTYPE BOARD FOR LPC11C24 CORTEX M0 ARM MICROCONTROLLER
FEATURES
Microcontroller
- LPC11C24 Cortex-M0, up to 50 Mhz
- 32 kB Flash, 8kB SRAM,
- CAN
- UART RS-485, two SSP, I2C/Fast+
- 32 GPIO pins,
- 4 TIMERS/COUNETRS, CAPTURE,
- WDT
- Serial Wire Debug.
- High-current output driver (20 mA) on one pin.
- High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
- Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
- Single 3.3 V power supply (2.0 V to 3.6 V).
- 10-bit ADC with input multiplexing among 8 pins.
- GPIO pins can be used as edge and level sensitive interrupt sources.
Board
- MCU: LPC11C24 Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, CAN,UART RS-485, two SSP, I2C/Fast+, ADC
- Power supply circuit with power jack
- Power-on led
- CAN interface
- RS232 interface
- Debug interface – SWD (Serial Wire Debug)
- UEXT connector
- Two user leds
- Two user buttons
- Reset button
- Prototype area
- Variable input voltage
- FR-4, 1.5 mm, soldermask, component print
- Dimensions: 92x72mm (3.6 x 2.8")
