NXP LPC-P1114
DEVELOPMENT PROTOTYPE BOARD FOR LPC1114 CORTEX M0 ARM MICROCONTROLLER
FEATURES
Microcontroller
- LPC1114 Cortex-M0, up to 50 Mhz
- 32 kB Flash, 8kB SRAM,
- UART RS-485, two SSP, I2C/Fast+
- 42 GPIO pins,
- 4 TIMERS/COUNETRS, CAPTURE,
- WDT
- Serial Wire Debug.
- High-current output driver (20 mA) on one pin.
- High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
- Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
- Single 3.3 V power supply (2.0 V to 3.6 V).
- 10-bit ADC with input multiplexing among 8 pins.
- GPIO pins can be used as edge and level sensitive interrupt sources.
Board
- MCU: LPC1114 Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
- Power supply circuit
- Power-on led
- USB connector only for power supply, not USB functionality
- Debug interface – SWD (Serial Wire Debug)
- UEXT connector
- Eight user leds
- Two user buttons
Reset button
Prototype area
FR-4, 1.5 mm, soldermask, component print
Dimensions:80x50mm (3.15 x 1.97")
