Monday, November 12, 2012

MPT-200C - 200W +5V & +/-15V Medical Open Frame Power Supply


MPT-200C - 200W +5V & +/-15V Medical Open Frame Power Supply

Features
Input Voltage 90~264 VAC, 127~370VDC
Input Frequency 47~440Hz
Power Factor PF>0.95/230VAC PF>0.98/115VAC, full load
AC Input Current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz full load
Inrush Current <25a 115vac="115vac" 230vac="230vac" at="at" cold="cold" or="or" p="p" start="start">Setup, Rise Time 1000ms, 20ms / 230VAC at full load , 3000ms, 20ms / 115VAC at full load
Hold-Up Time 16ms / 230VAC at full load, 16ms / 115VAC at full load
Leakage Current <180 264vac="264vac" at="at" earth="earth" for="for" leakage="leakage" p="p"><100 264vac="264vac" at="at" for="for" leakage="leakage" p="p" patient="patient">DC Output ADJ Range -5% to +10% rated output, on first output
Over Load Protection 120~160% rated load
Auto recovery once fault condition removed
Over Voltage Protection 115%~135% rated load, on first output
Over Temperature Protection At 95°C. Will shut down and recover automatically after temperature goes down
Power Good/Fail Signal TTL logic high for power good and TTL low for power fail
Remote Control RC+/RC-:0 ~ 0.8V=power on; 4 ~ 10V=power off sink current<4 ma="ma" p="p">Working Temperature -20°C to 70°C (refer to derating curve)
Working Humidity 20~90% RH non-condensing
Storage Temperature -40°C to +85°C
Storage Humidity 10~90% RH
Temperature Coefficient ±0.04%/°C (0~50°C) full load
Vibration 2G 10Hz ~500Hz 10 min cycle
Medical Safety Standards UL60601-1, TUV EN60601-1 approved
Commercial Safety Standards Complies with UL60950-1, TUV EN60950-1
Withstand Voltage I/P-O/P: 4000VAC I/P-FG, O/P-FG: 1500VAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG : >100M Ohms
EMI Compliance to EN55011 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS Compliance to EN61000-4-2 Level 3, 8KV, EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m , EN61000-4-3 Level 3, 10V/m
EN61000-4-4 Level 2, 1KV/5KHz, EN61000-4-4 Level 3, 2KV/5KHz
EN61000-4-5 Level 4, 2KV/Line-Line, 4KV/Line-Earth
EN61000-4-6 Level 2, 3Vrms/m, Level 3, 10Vrms/m
EN61000-4-8 Level 2, 3A/m, EN61000-4-8 Level 3, 10A/m, EN61000-4-11 Compliance
ENV50204 Level 2, 3V/m, 900MHz, ENV50204 Level 3, 10A/m, 900MHz
MTBF 262,100 hours min MIL-HDBK-217F
Dimensions 177.8 x 107.2 x 35.5mm

MPT-200C output Specifications
Voltage (max/rated) Current (amps) Power (watts) R&N (mV) Efficiency (%)
5V 20A 200W 80mV 80%
15V 5A 150mV
-15V 2A 80mV