Sunday, July 15, 2012

RF04 - USB Telemetry Module

The RF04 is a very easy to use radio telemetry module. The module is powered from the USB bus, so no external power supply or batteries are required. Just plug it into your PC and it will appear as a COM port. The RF04 module can be used by anyone who can program a PC to use the COM ports.

specifications:
- Power Supply: 5 VDC (USB powered)
- The working frequency: 433 MHz
- Interface: USB
- Data rate: 19.2 Kbps
- Outreach: 250 meters (LoS)







XBee ZigBee PRO S2B 63 mW Wire Antenna (XBP24BZ7WIT-004)

The XBP24BZ7WIT-004 module is part of the XBee ZB family which provides ZigBee level interoperability with ZigBee devices from other vendors. This hardware is only compatible with other ZB XBee modules; it is not compatible with the XBee 802.15.4.

How else do the ZB XBee modules differ from 802.15.4 ZB:
  • Is compatible only with ZB family
  • Sold by Parallax only in the popular wire antenna format. 802.15.4 is offered with wire antenna or chip antenna.
  • Slightly longer communication distance: 300 feet and up to two miles line of sight for the 1.25 mW and 63 mW modules respectively
  • Maximum baud rate is higher at up to 1 Mbps
  • Slightly lower power consumption than 802.15.4
  • Two less A/D I/Os and two more digital I/Os than 802.15.4
  • The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks. If this is not a requirement, 802.15.4 may be perfectly suitable for your project. Still having trouble deciding whether to use 802.15.4 or ZB? Take a look at our XBee Comparison Chart.


Because the XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board (# 32400) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.

Features:
  • Parallax support
  • Wire antenna
  • Cross-compatibility with other ZB modules
  • Low-power sleep modes
  • 300 ft (90 m) indoor/urban range and 2 miles (3200 m) outdoor line-of-sight range
  • Configured with API or AT commands, local or over the air
  • 10 digital I/O and (4) 10-bit ADC inputs

Adapter Boards:
  • XBee Adapter Board
  • XBee USB Adapter Board

Application Ideas:
  • Remote controlled Boe-Bot robot
  • Wireless data acquisition
  • Remote signal beacon for adventure seekers
  • Remote industrial monitoring
  • Lighting control
  • Keyless entry

Key Specifications:
  • 1200 bps – 1 Mbps interface data rate
  • 2.4 GHz frequency band (accepted world-wide)
  • Industrial temperature rating (-40C to 85C)
  • Transmit power 60 mW (+ 18 dBm)
  • Supply voltage 2.7-3.6 VDC; transmit current 220 mA; receive current 62 mA
  • Power-down current <4 mA
  • 3.3V CMOS UART interface level
  • Wire antenna dimensions: Height: 1.06 inches, Diameter at Base: 1.07 inches, Diameter at Widest Point of Tip: 0.124 inches. Antenna is a solder mount, wire can be bent at 90 degrees 1/8" from base.

Zig-110A set by Robotis

An RF transceiver module package containing two pieces of IC-based Zigbee modules and working at a frequency of 2.4 GHz. Module consists of Zig-Zig-100 and 110A.
Zig-100 is still a PCB, so it can easily be connected directly to the RC-100 remote control or to ZigSerial.
Zig-110A is equipped with pelingdung packaging and can be easily connected to the robot controller by using the + connector cable provided.

specifications:
- Power Supply: 2.7 VDC - 3.6 VDC
- The working frequency: 2.4 GHz
- Interface: UART
- Data rate: 57600bps (zig-zig-100 and 110A)

Friday, July 13, 2012

RX12-433D RF 433MHz FSK Transceiver

RFM12 is a low costing ISM band FSK transceiver module implemented with unique PLL. It works optional signal ranges from 315/433/868/915MHZ bands

Features:

  • low costing, high performance and price ratio
  • tuning free during production
  • PLL and zero IF technology
  • fast PLL lock time
  • high resolution PLL with 2.5KHz step
  • high data rate (up to 115.2 kbps with internal demodulator)
  • differential antenna input
  • automatic antenna tuning
  • Programmable TX frequency deviation (15 to 240 KHz)
  • programmable receiver bandwidth (67 - 400 kHz)
  • analog and digital signal strength indicater(ARSSI/DRSSI)
  • AFC
  • DQD
  • Internal data filtering and clock recovery
  • RX synchron pattern recognition
  • SPI interface
  • clock and reset signal output for external MCU use
  • 16 bit RX Data FIFO
  • Two 8 bit TX data registers
  • 10MHz crystal for PLL timing
  • wakeup timer
  • 2.2V - 5.4V power supply
  • low power consumption
Specifications:
- Power Supply: 2.2V to 5.4V
- The working frequency: 433 MHz
- Interface: SPI
- Data rate: 115.2 kbps in digital mode and 256 kbps
- Modulation: FSK

TYPICAL APPLICATIONS
  • Remote control
  • Home security and alarm
  • Wireless keyboard/mouse and other PC peripherals
  • Toy controls
  • Remote keyless entry
  • Tire pressure monitoring
  • Telemetry
  • Remote automatic meter reading
  • stand by current less than 0.3µA
Board type:
RX12-433D : module board with DIP
RX12-433S1: module board with SMD

RX12-915D RF 915MHz FSK Transceiver

RX12-915D RF 915MHz FSK Transceiver 
RFM12 is a low costing ISM band FSK transceiver module implemented with unique PLL. It works signal optional ranges from 315/433/868/915MHZ bands

Features:

  • low costing, high performance and price ratio
  • tuning free during production
  • PLL and zero IF technology
  • fast PLL lock time
  • high resolution PLL with 2.5KHz step
  • high data rate (up to 115.2 kbps with internal demodulator)
  • differential antenna input
  • automatic antenna tuning
  • Programmable TX frequency deviation (15 to 240 KHz)
  • programmable receiver bandwidth (67 - 400 kHz)
  • analog and digital signal strength indicater(ARSSI/DRSSI)
  • AFC
  • DQD
  • Internal data filtering and clock recovery
  • RX synchron pattern recognition
  • SPI interface
  • clock and reset signal output for external MCU use
  • 16 bit RX Data FIFO
  • Two 8 bit TX data registers
  • 10MHz crystal for PLL timing
  • wakeup timer
  • 2.2V - 5.4V power supply
  • low power consumption

specifications:

- Power Supply: 2.2V to 5.4V (5V Typ)
- The working frequency: 915 MHz
- Interface: SPI
- Data rate: 115.2 kbps in digital mode and 256 kbps
- Modulation: FSK


TYPICAL APPLICATIONS

  • Remote control
  • Home security and alarm
  • Wireless keyboard/mouse and other PC peripherals
  • Toy controls
  • Remote keyless entry
  • Tire pressure monitoring
  • Telemetry
  • Remote automatic meter reading
  • stand by current less than 0.3µA

Thursday, July 12, 2012

GWS S03N/STD/F servo

The GWS Standard S03N STD Servo Motor is compatible with RC systems manufactured by Futaba, JR, Hitec, Airtronics (Sanwa), Multiplex and any systems using 1,5 ms neutral. It comes with Futaba connector

NOTE: STD = Oiliness Bearing
specifications:
- Type of round: Standard (180Â °)
- Type of control: PWM
- Working Voltage: 4.8 - 6.0 V
- Current consumption: -
- Maximum Torque: 3.2 kg / cm @ 6.0 V
- The maximum rotary speed: 0.15 sec / 6.0 V @ 60A °
- Dimensions: 39.5 x 20.0 x 35.6 mm
- Weight: 41 g

HS-225BB mighty mini servo

HS-225BB servos have been around for sometime now and for a good reason, performance and durability. This little servo offers the same and sometimes more power than standard size servos. The main gear rests on a single ball bearing on top and a bronze bearing on the bottom. The spline is standard Hitec 24 tooth so any standard Hitec horn or arms will fit perfectly.

specifications:
- Power Supply: 4.8 VDC / 6VDC
- Torque: 3.9 (4.8 VDC) / 4.8 (6VDC)
- Speed: 0.14 (4.8 VDC) / 0.11 (6VDC) sec @ 60 deg
- Equipped with ball bearings
- Dimensions: 32.26 x 16.76 x 31 mm
- Weight:27g

HS-85MG mighty micro servo

The HS-85MG takes the 85BB one step further by incorporating metal gears. It offers a top ball bearing for smooth operation and is as powerful as a standard size servo. It is great for small gas and electric aircraft as well as many robotic projects. It has a standard size spline which means it will work with all of our gears and sprockets that mount to Hitec servos.

specifications:
- Type of round: Standard
- Type of control: Analog
- The working voltage: 4.5 VDC - 6VDC
- Current consumption: -
- Maximum Torque: 3.5 kg / cm (@ 6VDC)
- The maximum rotary speed: 0.14 s @ 60 degrees (6VDC)
- Dimensions: 28.96mm x 12.95mm x 29.97mm
- Weight: 22.1g

HS-5065MG High Performance Micro Servo

The HS-5065MG High Performance Micro Servo features Hitecs digital, programmable circut for incredible resolution, centering and holding torque; also featuring metal gears, a top-ball bearing, and nearly 31 ounces/inches of torque with a quick transit time of 0.11 sec at 6 volts, it will no doubt be the choice for high performance micro helicopters, electric park flyers, 1/18 scale cars and light duty robotic projects. We offer the new HS-5065MG servo in several configurations, 90° stock rotation, 180° modified rotation (programmed) and reverse rotation.


specifications:
- Type of round: Standard
- Type of control: Digital
- The working voltage: 4.8 VDC - 6VDC
- Current consumption: -
- Maximum torque: 2.2 kg.cm
- The maximum rotary speed: 0.11 s @ 60 degrees (6VDC)
- Dimensions: 23.37mm x 11.43mm x 23.88mm
- Weight: 11.9g

HSR-1425CR continuous rotation servo

Introducing the all new HSR-1425CR Continuous Rotation servo. If you are looking for a servo to pan or tilt your small camera or sensor multiple turns, this is the servo you need. If you are looking for a servo to power the wheels on your small robot, this is the servo you need. Fully proportional speed forward and reverse for precise movements. The potentiometer has been taken out and the dead-band increased to eliminate “creep” that occurs in many other servos that are modified for continuous rotation. Dual ball bearings on the output shaft ensure long lasting performance.


specifications:
- Type of round: Continuous
- Type of control: Analog
- The working voltage: 4.8 VDC - 6VDC
- Current consumption: -
- Maximum Torque: 3.37 kg.cm
- The maximum rotary speed: 52 rpm
- Dimensions: 40.6mm x 19.8mm x 36.6mm
- Weight: 41.7g