Thursday, March 24, 2016

Genuino 101


A learning and development board that delivers the performance and low-power consumption of the Intel® Curie™ Module with the simplicity of Arduino at an entry-level price. 

It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth LE capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. 


The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks. 

The Real-Time Operating Systems (RTOS) and framework developed by Intel is scheduled to be open sourced in March 2016. Until then, it's not possible to interface with it directly; only the Arduino core can do it via static mailboxes, so it can only accomplish a predefined list of tasks (interface with PC using USB, program the sketch into flash, expose Bluetooth LE functionality to sketch, perform PWM). The RTOS for Intel Curie is still under development and new functions and features will be released in the near future.



The 101 comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins. 
The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage. 


Technical specs
MicrocontrollerIntel Curie
Operating Voltage3.3V (5V tolerant I/O)
Input Voltage (recommended)7-12V
Input Voltage (limit)7-20V
Digital I/O Pins14 (of which 4 provide PWM output)
PWM Digital I/O Pins4
Analog Input Pins6
DC Current per I/O Pin20 mA
Flash Memory196 kB
SRAM24 kB
Clock Speed32MHz
FeaturesBluetooth LE, 6-axis accelerometer/gyro
Length68.6 mm
Width53.4 mm