AD-11 Solderless Breadboard
A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI and LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘Red’ bus is made up of two separate rows of 12 connecting sockets, and the ‘Black’ bus is one row of 24 connecting sockets.
There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked and remade into a different configuration.
AD-11 is one AD-01 and one AD-10. Size: 147 x 80mm
