LPC-P2106 PROTOTYPE BOARD FOR LPC2106 ARM MICROCONTROLLER
FEATURES
- MCU: 16/32 bit LPC2106 with 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
- extension header for uC pins
- 14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
- RS232 interface circuit
- RESET circuit
- RESET button
- DEBUG jumper for JTAG enable/disable
- BSL jumper for bootloader enable/disable
- RTCK pullup resistor
- Push BUTTON with pullup
- Status LED
- Power plug-in jack
- Single power supply: +5-9VAC/DC required
- Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
- Power supply filtering capacitor
- PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Prototype PCB area with +3.3V and GND bus
- Dimensions: 100x77 mm (3.9x3.05")
- Four mounting holes
