NXP LPC-H2129
LPC2129 HEADER BOARD FOR LPC2129 ARM7TDMI-S MICROCONTROLLER
FEATURES
- MCU: LPC2129 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
- Single power supply: +5VDC required
- Power supply status LED
- Power supply filtering capacitor
- Two channel RS232 interface
- RESET circuit with exterman control of Philips ISP utility via RS232
- RESET button
- DBG jumper for JTAG enable
- BSL jumper for bootloader enable
- JRST jumper for enable/disable external RESET vontrol by RS232
- 10 Mhz crystal
- Extension headers for all uC ports
- PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Dimensions: 76x55 mm (3.0x2.2")
- Space between the pin rows: 48.26 mm (1.9")
