Meanwell PB-600-48: 600 Watt Single Output Lead-Acid Battery Charger.
Features:
- 2/3/8 stage charging- Built-in active PFC function PF>0.95
- Protection: Reverse polarity / Short circuit / Over voltage / Over temperature
- Charger for lead-acid batteries
- 3 color LED loading indicator
- Built-in remote ON-OFF control
- Built-in temperature compensation function
- Built-in fan speed control (depends on charging current)
GENERAL SPECIFICATIONS
| Input Voltage | 90 ~ 264Vac 127 ~ 370Vdc |
|---|---|
| Input Frequency | 47 ~ 63Hz |
| Power Factor | 0.95/230Vac 0.98/115Vac at full load |
| Input Current | 6.8A/115VAC 3.4A/230VAC |
| Inrush Current | 25A/115Vac 50A/230Vac |
| Leakage Current | <3 .5ma="" 240vac="" td=""> |
| Battery Type | Open & Sealed Lead Acid |
| Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection | Automatically derate charge current until zero, recovers automatically after temperature goes down |
| Remote Control | Open: Normal work Short: Stop Charging |
| Leakage Current from Battery | 1mA |
| Fast Charge | 2 / 8 stage select |
| Charging OK | Relay contacts (RY15) |
| Battery Banks | 2 banks (A & B) |
| Output OK | Relay contacts (RY13) |
| Temperature Sense (Optional) | By NTC |
| Working Temperature | -20°C ~ +60°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.05%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25°C 70%RH |
| Safety Standards | UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V) approved |
| EMC | Compliance to EN55022 (CISPR22); EN61000-3-2,-3; ENV50204; |
| EN61000-4-2,3,4,5,6,8,11; EN55024; light industry level, criteria A | |
| MTBF | 135.6Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions | 230 x 158 x 67mm |
