AT-H150 is a handheld oscilloscope designed to make field service more convenient and simple. Nowadays, the signal frequency of many home appliance and components become higher and higher. AT-H150 is exactly such an instrument made to adapt the trends. With color display, 50MHz bandwidth and good value for money, AT-H150 will be your best choice of all.
- 50MHz digital storage oscilloscope.
- 3.5 inch 320 ×240 LED back-lit color display.
- 10Hz~156kHz function signal generator
- Clock and calendar
- One keypress leads to auto measurement function
- Auto zero calibration
- Vp-p, +Vp, -Vp, f, T, dV, dt readout and measurement parameters setup
- Save/ recall 40 DSO waveforms
- Auto power-off and consistent power-on modes. When being recharged, DSO switches to consistent power-on mode.
- 1600mAh rechargeable Li-battery and external AC power supply.
- Function generator provides Sine, triangle, Sawtooth and square wave. Can be used together with DSO to create a testing system.
- 200μs/ 400μS square wave can be utilized to test the ringing signal of interturn short-circuit.
Specification
- Sampling Rate 200M Sample/Sec (Single Ch)
- Bandwidth DC~50MHz(X10 probe); DC~6MHz (X1 probe)
- Input DC, AC
- Vertical Sensitivity 10mV/div to 50V/div in 1-2-5 steps
- Vertical Accuracy ±(5% + 0.1 div)
- Sweep Rate 5ns/div to 2.5s/div in1-2.5-5 steps
- Time base accuracy ±(0.01% +0.1div)
- Auto zero calibration yes
- Trigger Mode Normal, Single
- Edge trigger type Rising/falling
- Trigger level range ±3.8div (0.04 div per step)
- Auto measure setup Auto time base/amplitude setup
- Auto measure function Vp-p, +Vp, -Vp, f, T
- Auto measure accuracy ±(5% + 0.1 div)
- Waveform storage 40sets
- Waveform Interpolation (sinx) /x
- Auto power off 10 mins
- Recharge time More than 4 hours
- Battery life 3 hours
