| Specifications |
| Channels | 2 |
| Bandwidth | 200MHz |
| Rise Time | 1.8ns Approximately |
| Input Impedance | Resistance: 1M ±2% |
| Capacitance: (20±5)pF |
| Polarity | Normal and Invert |
| Maximum Input | 400V (AC + DC Peak) |
| Waveform Signal Process | CH1±CH2, CHlxCH2, CHlICH2, FFT |
| Bandwidth Limit | 40MHz / -3dB |
| Source | CH1, CH2, EXT., City Electricity |
| Mode | Edge, Pulse, Video, Slope Trigger |
| Sensitivity | Maximum 1 Div. (Frequency upper Limit to 40 MHz),
Maximum 2 Div., TV-V, TV-H, Video Trigger |
| Ext. Trigger Input Impedance | Resistance: 1Mohm ±2% |
| Capacitance: (20±5)pF |
| Ext. Trigger Sensitivity | Maximum 100mVp-p (Frequency Support Limit to 40MHz) |
| 200mVp-p, TV-V, TV-H, Video Trigger |
| Max. Input Voltage | 400V (AC + DC Peak) |
| Low Frequency Inhibition | Frequencies Less Than 100Khz will be inhibited |
| High Frequency Inhibition | Frequencies Greater Than 100Khz will be inhibited |
| Sampling | Real-Time Max. Sampling Rate:
0 series is 500MSa/s, 1 Series is 1GSa/s |
| Range (1-2-5 Increments) | 50s/div ~ 1ns/div |
| Mode | Main Sweep, Main Sweep and Delay Expansion Sweep, X - Y |
| X-Axis Input | Channel 1 |
| Y-Axis Input | Channel 2 |
| Phrase Shift | Maximum 3 Degrees at 5MHz |
| Voltage Measurement | Vpp, Vamp, Vrms, Vhi, Vlo, Vmax, Vmin, Pre-Shoot, Overshoot |
| Time Measurement | Frequency, Rise time, Fall time, Positive Width, Negative Width, Duty Cycle |
| Delay Measurement | Delay 1 -> 2  , Delay 1 -> 2  |
| Cursors Measurement | Voltage Difference Between Cursors: Δ V |
| Time Difference Between Cursors: Δ T |
| Frequency Difference Between Cursors: 1 Δ T |
| TFT LCD Type | 5.7 Inch |
| Display Resolution | 240 (Vertical) x 320 (Horizontal) Dpi |
| RS232 Interface | DB 9-Pin RS232 Interface |
| USB | USB Host / Device 2.0 Full Speed Supported |
| Line Voltage Range | AC 100V ~ 240V ± 10%, 45Hz ~ 440Hz, Auto Selection |
| Battery Power Option | Li-Ion Battery |
| Dimensions | 300 x 150 x 130mm |
| Weight | 2.5Kgs, 5.5lbs |
