Graphic LCD 240x64 STN, Yellow Green Background

Graphic LCD 240x64 STN, Yellow Green Background, Yellow-Green Backlight, 180.0x62.0x12.3 mm

Graphic LCD module with 240 x 64 dot STN. Widely used for display applications:
- Medical Instrumentation.
- Other Instrumentation., Panels, monitoring system, ETC
Pin Out:
1. FG          2. VSS
3. VDD      4. V0
5. / WR      6. / RD
7. / CE       8. C / D
9. NC       10. / RST
11. DB 0  12. DB1
13. DB2   14. DB3
15. DB4   16. DB5
17. DB6   18. DB7
19. FS1    20. Vout
21. BLA   22. BLK

Graphic LCD 240x64 Ver2.0

Is a graphic LCD modules that can be used to display monochrome images and text with 2 different sizes. This module can be applied to display the company logo, sensor measurement data and so on.

• 5VDC power supply
• Dimensions 18.39 cm) x 6.85 cm (L) x 2.73 cm (T)
• Dot number 240 x 64

H28 16 bit Analog-to-digital

The H28 is a 16 bit Analog-to-Digital Converter (ADC), which employs a delta-sigma conversion technique. With the linear input signal range of 324 mVPP, its resolution is 14 bits. 

The H28 is designed especially to meet the requirement for low power consumption, thus making it an ideal choice for battery powered systems. The H28 is equipped with a standby function, i. E. The ADC is in power down between each conversion. By utilizing this and overall low power consumption, current consumption values of 1.2uA or less can be achieved (one conversion in a second; Fast mode conversion time 16 ms). 

The H28 has an on-chip second order decimator filter to process the output of the second order modulator. The ADC also has two selectable conversion ranges with two optional offset levels. A bi-directional 2-wire I2C bus is used for configuring conversion parameters, starting conversion and reading out the A/D conversion result. 

H28 has one input channel suitable for piezo-resistive pressure sensor. In addition to pressure measurement configuration the device can be configured to temperature measurement. 

FEATURES 

• Low Standby Current Consumption 0.1uA 
• Low Supply Current: 0.2uA - 1.6uA 
• Supply Voltage: 2.0V - 5.0V 
• Ratiometric Conversion 
• Two Input Signal Ranges (VDD=2.35V): 405 mVPP, 105 mVPP 
• Two Optional Offsets (VDD=2.35V): 25 mV, 33 mV 
• Over Sampling Ratio: 512, 256, 128, 64 
• Conversion Times 32.2 ms - 2.5 ms 
• In Fast Mode: Over Sampling Ratio 64, 
• Conversion Time=2.5 ms, Resolution=10 Bits 
• Good Noise Performance due to (sigma~delta) Architecture 
• 2-Wire I2C Interface 

APPLICATIONS 

• Battery Powered Systems 
• Low Frequency Measurement Applications 
• Pressure and Temperature Measurement 
• Current/Power Consumption Critical Systems 
• Industrial and Process Control Applications in Noisy Environments 
• Weather forecast

WIFI-LPB100-B Eval Kit

WIFI-LPB100-B Eval Kit is a WiFi module evaluation kit designed for the WiFi module WIFI-LPB100-B.

Features

• What's onboard: USB to UART connector, RELOAD button, LED indicators, RESET button, WPS button
• Indicators: POWER, READY, LINK, RXD, TXD, WPS
• Also work as a USB to UART module by configuration

How to Use

• RELOAD button: power up, press and hold it (>=3s) then release, to restore the module to its factory settings immediately
• READY indicator: lights up when the WiFi module starts up successfully

WIFI-LPB100-B.

WIFI-LPB100-B is a WiFi module with external antenna connector.

Features

• Independently developed MCU platform, high cost performance
• Ultra low power consumption, suit for battery-powered applications
• Supports UART/GPIO data interfaces
• Supports Smart Link (APP provided)
• Firmware upgradable via wireless and remote, wireless batch configuration tool is also provided
• Supports WPS configuration
• Supports software power switch (reserved for the moment)
• SDK provided for secondary development
• Optional antenna
• WIFI-LPB100-A : PCB antenna
• WIFI-LPB100-B : External antenna

DWR-921 4G LTE Router

DWR-921 4G LTE Router

Device interfaces

• Four 10/100 Ethernet LAN ports
• WAN (RJ-45) port
• Two detachable 4G LTE / 3G antennas

Data rates

• Up to 150 Mbps with 802.11n clients
• LTE Uplink: Up to 50 Mbps
• LTE Downlink: Up to 100 Mbps

Standards

• 802.11n, compatible with 802.11g/b,
• 802.3
• 802.3u

UMTS/HSDPA/HSUPA band

• 900/2100 MHz
• Power Class 3

LTE band

• 900/1800/2600/800 MHz

Wireless security

• 64/128-bit WEP (Wired Equivalent Privacy)
• WPA & WPA2 (Wi-Fi Protected Access)

Firewall

• Network Address Translation (NAT)
• Stateful Packet Inspection (SPI)

VPN

• L2TP/PPTP/IPSEC VPN pass-through

LED status indicators

• WAN
• LAN
• WLAN
• 4G LTE
• 3G
• SMS
• Signal

Dimensions

• 190 x 111.5 x 23.5 mm

Weight

• 500 grams

Temperature

• Operating: 0 to 40 °C

Humidity

• Operating: 10% to 90% non-condensing

Certifications

• CE
• Wi-Fi Certified

DWR-555 HSUPA 3G VPN ROUTER

The HSUPA 3G VPN Router allows you to connect to a 3G mobile network and share a 3G connection with PCs and wireless devices within the area. The router can be used with an analog phone to make mobile phone calls over GSM. Firewall and VPN features are also included for secure remote connections

Features

• Embedded SIM Card; Easily connect UMTS/HSDPA/HSUPA network
• External 3G Antenna will have good signal performance
• Share Network with your friends via high-speed Wi-Fi 150N (11n 2x2) connection
• 3G back-up network enables “always –connection Internet service” concept
• Won’t miss any GSM call and SMS
• Secure and Private network access via PPTP, L2TP and connection and VPN pass through as well
• VPN

Specifications
Interface	4 x LAN (RJ-45) 1 x WAN (RJ-45) 1 x Phone (RJ-11) 1 x External 3G antenna
GSM BAND (GSM/GPRS/EDGE)	850/900/1800/1900 MHz Power Class 4 (850/900 MHz) Power Class 1 (1800/1900 MHz)
UMTS/HSDPA/HSUPA BAND	900/1900/2100 MHz Power Class 3
Data Rates	300Mbps
Wireless Security	64/128-bit WEP (Wired Equivalent Privacy) WPA & WPA2 (Wi-Fi Protected Access)
Firewall	Network Address Translation (NAT) Stateful Packet Inspection (SPI)
USIM Slot	Standard 6-pin SIM card interface
VPN	L2TP/PPTP/IPSEC VPN Pass-through 5 Dedicated IPSec tunnels

Arduino M0 PRO

M0 Pro - 32 bit Cortex M0 with Debug Interface

The M0 Pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. 

The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 Pro the ideal educational tool for learning about 32-bit application development. 

Atmel’s Embedded Debugger (EDBG), integrated in the board, provides a full debug interface with no need for additional hardware, making debugging much easier. EDBG additionally supports a virtual COM port for device programming and traditional Arduino boot loader functionality uses.

Features:

- UART: 1

- Analog Input Pin: 6 pin (12-bit ADC channels).

- Analog Output Pin: 1 pin (10-bit DAC).

- DC current per I / O pin: 7 mA.

- Flash Memory: 256 KB

- SRAM: 32 KB

- Clock Speed: 48 MHz.

Copper heat sink with adhesive sticker

Copper heat sink with dhesive sticker

Coolers are made of copper and has adhesive on the bottom.

Size = 13mm (L) x 12mm (W) x 5mm (H).

BTM-230 Bluetooth

BTM-230 BC04-EXT Bluetooth Class1 Module

This module is a Bluetooth Class 1 module which has the coverage area to 80% better / wider than usual Bluetooth module. This module uses CSR chipset Bluecore 4 and onboard RF power amplifier (maximum 17 dBm). In addition, the module also supports Bluetooth standard V2.1 + EDR.

With the SPP profile, the module is also suitable for data communication applications such as DUN, OPP, FTP, PBAP and HID.

• Symbol:BTM-230
• Manufacturer part number:BTM-230
• Manufacturer:RAYSON