Saturday, April 26, 2014

MS5900 THREE PHASE ROTATION INDICATOR

MS5900 THREE PHASE ROTATION INDICATOR

Motor and Phase Rotation Indicator is a handheld, battery-operated instrument designed to detect the rotary field of three-phase systems and determinemotor-rotation direction.
Features:
  • Three Phase Rotation Indication
  • Operating Voltage: 120V~400V AC
  • LED Indication for Rotating Status

Specification:
Operating Voltage
120V~ 400V AC
Current Consumption
≦20mA
Frequency Range
2Hz~ 400Hz

Gas Sensor Sampler Kit

Gas Sensor Sampler Kit is a collection of some of the gas sensor module that can be used with Parallax microcontrollers. Gas Sensor Sampler kit is suitable for gas identification, monitoring gas levels, and other applications associated with the gas. 

specifications: 
- 1pcs CO Gas Sensor Module (MQ-7) 
- 1pcs CO2 Gas Sensor Module (MG-811) 
- 2pcs LPG Gas Sensor Module (MQ-5) 
- Bonus 4 pcs of screw drives

Heart Sound Sensor

This Heart Sound sensor integrated micro-sound components which is made from new polymer materials, can output low-impedance audio signal. Using modular design, PCB plug-way closed. It can be widely used in various types of acquisition equipment, such as heart sound signal acquisition, fetal-audio signal acquisition, as well as other surface-tone signal acquisition.


Features

  • Output analog voltage signal
  • High-fidelity, low-impedance audio signal
  • High integration, reliability
  • Overload range 100 times
  • Anti-jamming design

Application Ideas

  • Heart sound signal acquisition
  • Fetal-audio signal acquisition
  • other surface-tone signal acquisition

Key specification:

  • Input voltage: 3~5VDC
  • Power consumption: 5mA
  • Frequency range: 1-600Hz
  • Sensitivity: >4mV/Pa
  • Output voltage signal: 0.5-1.5V
  • Interface: 3.5mm audio jack

Cautions
The warnings and wrong operations possible cause dangerous.

Friday, April 25, 2014

ROBOTIS DARWIN-MINI


RFID Glass Tag SLG01

SLG01-125KHz LF proximity RFID Glass tag is developed based on SMARTCHIP SMC4100 IC, which is connected to a coil with a few turns and then embedded into bulletproof glass.
It is compatible with the type SL101, SL102 or ISO10536 protocol. This module can be implanted in the animal body (implants) such as dogs, cats, horses, fish and others. 


specifications: 
- Chipset SMC4100
- Working frequency: 125KHz 
- Reading distance: 5cm 
- Format: ISO10536 
- Data bits: 40bit
- Temperature -10 degC ~ +50degC
- Dimensions: Diameter 5.5mm, Length 17mm. 
- Material : Ballproof Glass

Electric Imp Shield

Electric Imp Shield it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics. Of course, if you're developing for it you'll need a way to get in there and poke around. The Electric Imp Shield allows you to connect your Arduino project to the internet through your home WiFi network. This way, your Arduino can take advantage of the Imp Cloud service and connect to HTTP APIs.


The Shield connects one of the imp's UARTs (Imp pins 5 and 7) to either the Arduino hardware UART or a software serial on pins 8 and 9. It defaults to the software serial, but there are jumpers on the bottom side to set it to the hardware serial. A couple imp pins (8 & 9) are also connected to LEDs. They can be disconnected via jumpers on the bottom.
Because the Electric Imp can draw up to 400mA on the 3.3V line, this shield has its own voltage regulator which is fed from the 5V Arduino line. Most Arduino compatible boards should be able to handle this amount of draw but beware that some clones that use less robust VREGs could see trouble.

Electric Imp Breakout board

Electric Imp Breakout essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard 0.1" headers to solder to as well as the necessary CryptAuthEE IC to identify your prototype to the Imp Cloud service!

This is just the development board, so you'll need to buy the Imp separately.

Note: If you want to use the mini-USB or battery inputs for power, you will need to populate the 3-pin jumper and set it to either 'BAT' or 'USB'. Otherwise, you can just simply power the board using VIN and GND without the use of a jumper.

Leoduino Case

Leoduino case ( arduino compatible) . Made from Acrylic with laser cutting and engraving.



Xbee Shield for Arduino and compatibles.

XB Shield / Xbee Shield / Zigbee Shield is an add-on / Shield module to Innoduino or Arduino ™ / Arduino ™ Compatible . By using this shield then the XBee ® / XBee - PRO ® module can be easily connected (plug and play) to the Arduino ™ modules / Arduino ™ Compatible, without having to worry about the voltage levels and layout of pin connections . Furthermore freedom in determining the type of XBee that will be used are available , because the XB shield  is compatible with XBee ® and XBee - PRO ® .


specifications :
  • Supporting the XBee ® / XBee - PRO ® OEM RF Module (separate purchase)
  • Has 1 pin input lines and 8 pin input / output that can be configured ( 7 of which can also be used as analog inputs ) .
  • Has a 2 pin PWM output lines can also be configured .
  • Requires power supply for the module : 3.3 & 5 VDC .
  • Integrated with a series of LED indicators .
  • Available for Antenna holder , if using XBee ® that does not have a chip antenna .
  • Has a pin layout that corresponds to the module Arduino or Arduino Compatible .
  • There is a sample program to test the function module XBStest.ino .
  • Provided also XCTU setup.exe application to configure the XBee ® / XBee - PRO ® .
  • Dimensions : 6.1 cm  x 6.05 cm  x 2.9 cm 

RFID Shield for arduino / compatibles

RFID Shield is an add-on/Shield to Innoduino or Arduino ™ module / Arduino ™ Compatible . This module serves as an RFID module for Arduino microcontroller module . By using this module then the module can easily access the Arduino RFID , Installation process can be easily performed without using jumper cables .

The RFID Shield has a connection pin layout compatible with the Arduino module . In addition to the Arduino ™ Leonardo /Leoduino / Inoduino , with the allocation pinout , this module can be used with Arduino board Arduino ™ Compatible ™ or other like : Unoduino , Maxiduino, Arduino UNO and Arduino Mega .


specifications :
  • Based SL030 module .
  • Supports tag type : Mifare ® 1k , Mifare ® 4k , Mifare ® Ultralight ® and .
  • Detection distance of about 3 cm ( with Mifare 1k ) .
  • Using I2C ® interface modules to connect to the Arduino / microcontroller .
  • Requires power supply for the module : 3.3 & 5 VDC .
  • Has a pin layout that corresponds to the module Arduino or Arduino Compatible .
  • There is a sample program to test the function module RFIDshield.ino .
  • Dimensions : 5.4 cm ( P ) x 5.35 cm ( L ) x 2.35 cm ( T )