Friday, February 15, 2013

Raspberry Pi Model B 512MB


The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The Raspberry Pi is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 128 or 256 Megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. This board is intended to run Linux kernel based operating systems. 

This is the Raspberry Pi Model B 512MB RAM model with two USB ports and a 10/100 Ethernet controller. Please note some boards are made in the UK, some in China. WE DO NOT KNOW IN ADVANCE WHICH ONES YOU MAY RECEIVE! 

As typical of modern computers, generic USB keyboards and mice are compatible with the Raspberry Pi. The Raspberry Pi use Linux-kernel based operating systems. The Raspberry Pi does not come with a real-time clock, so an OS must use a network time server, or ask the user for time information at boot time to get access to time and date info for file time and date stamping. However a real time clock (such as the DS1307) with battery backup can be easily added via the I2C interface. 
Adafruit makes many accessories and starter kits for the Rasperry Pi, check them out in our Raspberry Pi section. 

Raspberry Pi® is a trademark of the Raspberry Pi Foundation. 


specifications:
- Power supply: 5 VDC, 700 mA (via micro USB)
- Based microcontroller / microprocessor: ARM1176JZF-S core, 700 MHz
- Number of I / O ports: 8 pin GPIO
- Port interface: TTL UART, SPI, I2C, USB, Composite RCA, 3.5 mm jack, 10/100 Ethernet (RJ45), LCD Panels via DSI, CSI (Camera Serial Interface), HDMI
- Bootloader: melalaui LINUX-based OS
- Weight: 39.29 grams
- Features: Memory 512 MB, 2 USB PORT, Graphics Broadcom VideoCore IV, SD Card Slot
- Dimensions: 85.60mm (L) x 56mm (W) x 21mm (H) (the size of an ATM card!)

Thursday, February 14, 2013

Meanwell RSP-1500-27 Industrial Switching Power Supply

Meanwell RSP-1500-27 Industrial Switching Power Supply

AC/DC Power Supply Single- Output 27 Volt 56A 1.512KW

1512W AC/DC ENCLOSED SWITCHING POWER SUPPLY,  27Volts @ 56Amps


Specifications:

  • Size (L x W x H) (inches): 10.9 x 5.0 x 3.3
  • Ripple and Noise (mV p-p): 150
  • Load Regulation: 0.5%
  • Line Regulation: 0.5%
  • Input: 90-264VAC @ 47-63Hz
  • Built-in active Power Factor Correction function
  • Built-in ON-OFF control and remote sense function
  • Parallel function
  • Universal AC input
  • 3-year warranty
  • Certifications: UL/CUL/TUV/CE/CB/PFC
SpecificationValue
FamilyRSP-1500
Agency ApprovalsEN|TUV|UL
Minimum Operating Temperature-20°C
Maximum Operating Temperature70°C
Maximum Input Current17A(Typ)
Input Frequency47Hz to 63Hz
Minimum Isolation Voltage3000V
Number of Outputs1
MFR Product FamilyRSP-1500
Output Voltage27V
TypeAuto Switching
SpecificationValue
StyleEnclosed
Product TypeAC to DC Power Supply
Maximum Output Current56A
Maximum Output Power1512W
Input Voltage90V to 264V
Product Height83.5mm
Product Length278mm
Product Width127mm
Efficiency90%(Typ)

Tuesday, February 12, 2013

ACR1281U-C8 RFID reader / writer

ACR1281U-C8ACSA50 RFID reader USB interface to PC. Contactless RFID with USB data communication output. This module is a replacement module for ACR120U Contactless Reader USB. Sales package consists only of Module ACR1281U-C8 (not accompanied by SDK Software)
Applications:
  • e-Government
  • Banking & Payment
  • Access Control
  • Network Security
  • e-Purse & Loyalty
  • Transportation
specifications:
Dimensions120.5 mm (L) x 72.0 mm (W) x 20.4 mm (H)
Weight140 g
InterfaceUSB Full Speed
Operating DistanceUp to 50 mm (depends on the tag type)
Supply VoltageRegulated 5V DC
Supply Current200mA (operating); 50mA (standby)
Operating Temperature0-50⁰ C
Operating Frequency13.56 MHz
Smart Card Interface Support
  • Contactless
  • ISO 14443 Type A & B
  • Mifare
Compliance / Certifications
  • ISO 14443, ISO 7816, FIPS 201, PC/SC, CCID, CE, FCC, RoHS, USB Full Speed
  • Microsoft WHQL: 2000, XP, Vista, 7, 8, Server 2012
Operating System Support
  • Win 2000, Win 2003, Win 2003 R2, Win XP, Win Vista, Win 2008, Win 7, Win 8
  • Win 2003 x64, Win 2003 R2 x64, Win XP x64, Win Vista x64, Win 2008 x64, Win 2008 R2 x64, Win 7 x64, Win 8 x 64, Win 2012 x64
  • Mac
  • Linux
  • Android 3.1 and above

LEGO MINDSTORMS EV3

you can turn your LEGO creations into live robots that follow your every command. The new LEGO MINDSTORMS EV3 set includes everything you need – motors, sensors, programmable brick, 550+ LEGO Technic elements, remote control – to create and command robots of even your wildest imagination, including 5 cool robot characters. Download the 3D building instructions and the app to command your robot via your smart device. Then program your robots to walk, talk, move and do whatever you want them to do to via the intuitive software program, the programmable brick or your smart device.


RICi-E1 Fast Ethernet over E1/T1 Intelligent Converters

RICi-E1 Fast Ethernet over E1/T1 Intelligent Converters 

• Wire-speed packet forwarding Connect Fast Ethernet
• 4 levels of QoS, based on four VLAN priority queues in accordance with 802.1p and LANs over E1 or T1 IP Precedence
• Inband and out-of-band management access via ASCII terminal, Web browser, circuits Telnet, or SNMP • Plug-and-play using DHCP client
• VLAN stacking and tagging, keeping Ethernet user traffic completely separate from management data, while maintaining user VLAN settings intact

RICi-E1 and RICi-T1 are intelligent converters connecting Fast Ethernet LANs over full or fractional E1 or T1 circuits. They enable service providers and ISPs to supply transparent Ethernet services, without interfering with user traffic.

RICi-E1 and RICi-T1 comply with RAD’s unique set of EtherAccess™ features. This feature set provides services and carrier backhaul applications over low and high- speed SDH/SONET and PDH circuits, from fractional and full E1/T1 or E3/T3 over STM-1/STM-4 to Gigabit Ethernet.

RICi-E1 and RICi-T1 are equipped with one E1/T1 port and one 10/100BaseTx port. Packets are forwarded from the Ethernet network to the TDM network at wire-speed, fully utilizing the expensive TDM circuit bandwidth.

The VLAN Priority bits (802.1p) and IP Precedence priority schemes enable users to define four different QoS levels, according to the application requirements.


RICi-E1, RICi-T1 
Fast Ethernet over E1/T1 Intelligent Converters

The Fast Ethernet bridge handles 1800-byte frames, supporting VLAN  applications and other protocols requiring large frame sizes. In filter mode, the  bridge learns MAC addresses and filters  local traffic, and in transparent mode it forwards any received packet.

VLAN stacking is used to tag direct user and management traffic to different VLANs, thus preserving the user LAN settings, fully separating user traffic from management data.

The DHCP client automatically obtains the IP address, the IP mask and the default gateway, minimizing installation time.

The units feature fault propagation. When a TDM link failure is detected, RICi-E1 and RICi-T1 closes the user port.

SPECIFICATIONS :

  • E1 INTERFACE  Number of Ports 1 
  • Compliance G.703 G.704 
  • Data Rate 2.048 Mbps 
  • Line Code HDB3, AMI
  • Framing  Unframed - Framed: G.732N
  • Max Frame Size 1800 bytes 
  • Line Impedance 120Ω, balanced -75Ω, unbalanced 
  • Providing Transparent LAN Services over Leased Lines
  • System Clock Internal or loopback 
  • Diagnostics Remote loopback 
  • Connector RJ-45

PD-28 High Voltage Testers

PD-28   High Voltage Testers 
H.V. Probe  
Input Impedance : 1000M Ohm  



FEATURES

 PD-20 and PD-28 have the same shape and color but different specifications.
 Meet IEC/EN 61010-1, IEC/EN 61010-2-031
 PD-28 is a high voltage probe that is used with DMM
 PD-20 and PD-28 are high voltage probes. They measure both AC and DC voltages with your multimeter. They consist of 2 kinds of contact tips, a test clip for the ground, a set of test leads for multimeter and a high qualify enclosure. The enclosure has very good insulation properties.
 They are lightweight and ruged. Two kinds of contact tips are avaialble. One is a round needle tip for normal use. Another is a special flat spring type for CRT anode.
 Before taking any measurements, first connect the alligator clip of this probe to earth ground and amke sure connection is proper.

SPECIFICATIONS
 
Input Impedance1000M Ohm.
Attenuation Ratio1000 : 1
AccuracyDCV (0 ~ 20kV) +/- 1%, DCV (20kV ~ 40kV) +/- 2%, ACV (0 ~ 28 kV) typically +/- 5% at 60Hz
Max. Working Voltage40kV DC or 28kV AC
Operating Temperature0 degree C ~ 50 degree C
Storage Temperature-10 degree C ~ 60 degree C
Cable Length1m
WeightApprox. 260g

ACR1281S1-C8ACSA50 RFID reader


ACR1281S1-C8ACSA50 RFID reader Serial interface to PC. Contactless RFID with UART serial data communication output. This module is a replacement module (successor) for ACR120S Contactless Reader Serial. Sales package consists only of Module ACR1281S1-C8 (not accompanied by SDK Software)

specifications:
- Power supply: 5VDC (from USB power), 200mA (max)
- Working frequency: 13.56MHz
- Reading distance: 5 cm
- Interface: RS232 UART
- Format the card: Mifare (Classics, Desfire), ISO 14443 A / B
- Dimensions: 120mm x 73mm x 20mm

Monday, February 11, 2013

The Micro Magician robot controller

The Micro Magician robot controller is the perfect choice for small / low voltage robot 
projects. This low cost Arduino compatible controller is packed full of features: 

    •   Small size of just 60mm x 30mm 
    •   Supply voltage from 3.6V to 9V with 3.3V regulator and reverse polarity protection 
    •   ATmega168 or ATmega328 MCU at 8MHz  
    •   Dual 1A FET “H” bridge with electronic braking, current limiting and overload detect 
    •   3 axis accelerometer with 0G detection and either 1.5G or 6G full range sensitivity 
    •   38KHz IR receiver with signal detection LED 
    •   Up to 8 servos can plug directly into the controller when V+ is set to Battery 
    •   3.3V and GND outputs available for powering sensors 
    •   All I/O pins (except D4) have both male and female header pins 
    •   Status LEDs for Power, RX, TX, IR signal and D13. 


Power 
The Micro Magician is designed to work on voltages as low as 3.6V allowing it to be  
powered by 3xNiMh cells or a single Li-Ion cell. Do not exceed 9V otherwise damage  
to the A3906 motor driver may occur.  

Two link inputs allow two battery holders to be linked in series otherwise they can be  
ignored. These pins only connect to each other. A header provides power output for  
external devices controlled via the onboard power switch.  

The controller can be powered via the USB port or ISP socket for programming but  
battery   power   is   needed   for   the   motor   controller   and   servos.   Polarity   protection  
prevents damage if the battery is accidentally connected the wrong way. 

A3906 Dual FET “H” bridge 
The A3906 motor driver can drive two DC brushed motors or 1 stepper motor. The  
FET “H” bridges have a very low voltage drop so each output has been internally  
limited to 900mA to prevent damage from accidental short circuits. Electronic braking  
is possible by driving both inputs high.  

The “motor stall flags” are normally held high by pullup resistors and will go low when  
a motor draws more than the 900mA current limit. Connect these to spare digital  
inputs so your program will know if your robot gets stuck. 

When not in use the A3906 can be put into sleep mode and it’s control pins (D5 – D8)  
used for other purposes.  

MMA7361L 3-axis accelerometer 
The MMA7361L detects acceleration due to both gravity and motion on all three axis’s.  
This feature gives robots a sense of balance and can be used to detect if the robot is  
about to fall over. If the robot has fallen over then this sensor can aid self-righting  
maneuvers. The ability to detect acceleration can also be used to determine if the  
robot is moving or has been involved in a collision eliminating the need for bumper  
switches. This sensor uses Analog inputs A0, A1 and A2. 

Robot Line Follower Base Board


Robot Line Follower Base Board is a version of the previous product, the Line Follower Robot. The difference between the two products is the absence of Kit-wheel drive and a sensor module detection line on Line Follower Robot Base. As for the programming side, layout, schematic is the same as the product Line Follower Robot. The presence of this product is very helpful for robotics enthusiasts to modify this robot kit using another Kit wheel to fit the application to be developed. Line Follower Robot is a wheeled robot kit designed specifically for the application of line follower. This robot kit is suitable as a means of learning about line follower robot for entry level to the learning algorithm for advanced programming.

Specifications:
- Based ATmega168 microcontroller.
- Equipped with an internal motor driver SN754410 dual H-Bridge.
- No Kit comes with front or rear wheel drive.
- Not equipped with sensor detection kit line.
- Equipped with LCD 8x2 character that serves as a medium of information.
- Provided communication line RS-232 UART.
- Available in 3 pieces that serve as an input switch and reset.
- There is a 5x2 ISP port that serves for charging into the microcontroller program code.
- Have 1 piece On-Off switch that will make it easier to decide or connect the power supply to the circuit controller.
- Requires power supply from 6 AA batteries (1.2 Vdc or 1.5 Vdc).
- There is an example program in C language which can be directly used for the application of line follower.
- Setting the parameters / sensor logic can be easily set using the GUI software that can run on a PC (Windows OS).
- Program in the microcontroller can be changed / modified as needed.
- The use of sensors and motor modules can be replaced as needed by using the sensor module and the motor of the Innovative Electronics or other appropriate product.

Monday, February 04, 2013

Figaro Oxygen Sensor SK-25F


The Figaro Oxygen Sensor SK-25F is a unique galvanic cell type oxygen sensor. Its most notable features  are no influence from   CO2, good linearity up to 30% Oxygen, and excellent chemical durability.   This      feature     makes      the    sensor     ideal    for  oxygen monitoring in various applications such as the biochemical field,  food industry, and domestic safety applications. 



Features:                                                                    
* Virtually NO influence from CO2, CO, H2S, NOx, H2                           
* Operates in normal ambient temperatures                                            
* Good linearity                                                               
* No position dependency                                                      
* Stable output signal                                                              
* No external power supply required for sensor operation 
* No warmup time is required 

 Applications: 
* Biotechnology - Oxygen incubators, anaerobic  cultivators 
* Food industry - Refrigeration, greenhouses 
* Safety - Air conditioners, oxygen  detectors, fire   detectors, fuel cell systems