SIC-SKD7001

SIC-SKD7001 T5557 EM Encoder

Multipurpose RFID reader / writer with Windows application software for the low frequency RFID FDX series. This Simulator Kit Development (SKD) SIC-SKD7001 is used for evaluating and exploring various features of low frequency FDX RFID series from Silicon Craft Technology (SIC). The SIC-SKD7001 contains many essential functions for example reading, writing, accessing to a specific portion of data, etc. The SIC-SKD7001 will guide user/developer to quickly understand the operations and capabilities of the SIC FDX-RFID microchips. The SIC-SKD7001 is suitable for system integrators and hardware/software developers who have to be involved in the field of low frequency RFID.

specifications:

- Frequency: 100-150 kHz.

- Protocol: SIC.

- Modulation: Manchester, Bi-Phase.

- Data bit rate: RF/32, RF/64.

- Serial interface RS232 UART (USB Optional)

- Type of chip: SIC7771,

128x64 pixel LCD graphic with yellow green LED backlight.

128x64 pixel LCD graphic type STN transflective positive (yellow green) with yellow green LED backlight.

Technical Specifications:
- Built-in KS0107 KS0108 or equivalent controller.
- Number of dots = 128 x 64 dots
- View area = 62.0 (W) x 44.0 (H) mm
- Outline dimension = 78.0 (W) x 70.0 (H) x 14.3 (T) mm
- Dot pitch = 0.44 (W) x 0.60 (H) mm
- Input voltage = typ. 5.0 V.

128x64 pixel LCD graphic with white LED backlight.

128x64 pixel LCD graphic type STN transmissive negative (blue) with white LED backlight.

Technical Specifications:
- Built-in KS0107 KS0108 or equivalent controller.
- Number of dots = 128 x 64 dots
- View area = 62.0 (W) x 44.0 (H) mm
- Outline dimension = 78.0 (W) x 70.0 (H) x 14.3 (T) mm
- Dot pitch = 0.44 (W) x 0.60 (H) mm
- Input voltage = typ. 5.0 V.

GPS starter kit with LR9540 module

GPS Starter Kit is a means of developing OEM GPS receiver module based LR9540 (LR9548), equipped with LCD 16 characters x 2 lines as a medium of display. This module is suitable for developing applications related to GPS, such as: GPS navigator, GPS tracking, etc..

GPS Starter Kit has undergone a renewal in the use of the GPS module. In previous versions of the GPS Starter Kit uses a GPS module EG-T10, the current GPS Starter Kit comes back using the GPS module LR9540 (LR9548)

LR9540 (9548)

• Chipset SiRFstarIII
• Channel 20
• Reacquisition 0.1 sec (avg)
• Hot start 1 sec (avg)
• Warm start 35 sec (avg)
• Cold start 42 sec (avg)

Specifications:

• Based LR9540 (LR9548), OEM GPS receiver module with 20 channels interface UART / TTL output and has a SiRF binary protocol NMEA-0183 &.
• OEM GPS Receiver module supports other work on the voltage of 5 VDC and has a pinout accordingly.
• Supports active antenna voltage is 5V and 3.3 V as it is equipped with a 3.3 VDC voltage regulator.
• Available manual reset button and socket for backup battery 3 V sized 'CR2032'.
• Equipped LCD 16 characters x 2 line LCD with 4-bit circuit and the LCD contrast level regulator.
• Can be connected to a computer's USB port using the PC-Link USBer.
• Requires 5 VDC power supply input.
• Compatible and support the system microcontroller / microprocessor others.
• Dimensions: 11.65 cm (l) x 10.45 cm (w) x 2.8 cm (h)

Equipment:

• 1 piece GPS Starter Kit Board.
• 1 Quick Start sheet.
• 1 piece CD contains sample applications, datasheet LR9540 (LR9548), etc..

Serial Cable V35 to RS-232

Serial Cable V35 to RS-232
Specs:

• serial communication
• length 50cm / 100 cm
• V35 female to db25 male

DEKKO 4070D handheld LCR meter

DEKKO 4070D Hand Held LCR Meter

Specifications:

• 0.1μ H to 200H inductance measurement
• 0.1pF to 20,000μF capacitance measurement
• 1mΩ to 20MΩ resistance measurement
• Dissipation factor measurement
• Zero adjustment
• Quick responding of measurement

Mastech MS6550B Infrared Thermometer

MS6550B Infrared Thermometer by Mastech, Contactless, wide range IR thermometer.

Features

lOptical Resolution (D:S) (50:1)

lWide temperature measurement tange

lLaser target pointer

lReadout is ℉&℃selectable

lKTC/infrared thermometers selection

lTemperature Resolution: 0.1℃or 0.1℉

lLCD with double temperature display and 4 bits

lMAX(highest), MIN(lowest),DIF(difference),and AVG (average) temperature display

lEmissivity adjustable (0.10 to 1.00)

lHigh-temp,and low-temp.alarm.

lData recording (record up to 100 group of data)

lResponse time: 500 msec

lLaser power: Less than 1 milli watt

lOptical Response: 8 um to 14 um

lWorking Voltage: 9V battery

lDimensions:Length 140×56×90

lWeight: 500g    

Accessories		quantity
	Standard K-type thermocouple(-40 to 260℃)	1
	USB data cable	1
Standard	Data communication software(CD)	1
	Leather bag	1
	9V battery (6F22)	1
Optional	DC 9V power supply(7101-100mA)	1

Specifications	MS6550B
Infrared Temperature Range	-32℃~1650℃ -25℉~3002℉
Infrared Temperature Accuracy	>510℃	±1.5%
	50℃~510℃	±(1.5%+1℃)
	15℃~50℃	±(1.5%+2℃)
	-32℃~15℃	±3℃
Temperature Resolution	±0.1℃ / ±0.1℉
Repeatability	±0.5℃ or ±0.5%
Distance to Spot (D : S)	50 : 1
℃ / ℉ Selection	√
Emissivity
Response Time	500ms
Laser pointer	√
Data Logging	100 groups
Reading Hold	√
MAX, MIN,DIF,AVG	√
Display Backlight	√
Temperature Alarm Setting	√
Low Battery Display	√
K-type Temperature Range	-40℃~1370℃ -40℉~2498℉
K-type Temperature Accuracy	±(1.5%+1℃)
USB Interface (Windows OS)	√

DT-SENSE Color Sensor

DT-SENSE Color Sensor is a color sensor module Taos TCS3200-based sensors that can be used for the measurement of the RGB components of an object. DT-SENSE Color Sensor has the ability to save 25 color data as well as two options ie UART TTL interface and I2C. This module can be used for application of color or color sorting system of recognition.

Specifications :

• TCS3200D Taos-based sensors.
• Being able to measure the RGB color components of a colored object.
• Equipped with a spacer of 3 cm so that it covers an area of view (field of view) 2 cm x 2 cm.
• There are 2 white LEDs for help reading the color data on the object.
• Available storage features 25 pieces of color data.
• Pin input / output levels are compatible with TTL / CMOS.
• Equipped with a TTL UART and I2C interfaces.
• Configuration of serial communication are: baudrate 9600 bps, 8 data bits, 1 stop bit, no parity, and no flow control.
• Bit I2C interface supports data rates up to 50 kHz.
• In antamuka I2C module can be cascaded up to 8 modules without any additional hardware.
• Hardware I2C address setting via jumper settings.
• Available command to read the reference white balance and black balance and white colors to black reference read value via the command set.
• Needs power supply from 4.8 to 5.4 VDC.
• Available description and explanation of the command set supported by this module.
• Available sample test program for the I2C interface.
• CD / DVD-ROM contains a testing program, manual, quick start
• Module dimensions: 4.8 cm (l) x 4.8 cm (w) x 2.8 cm (h).

DT-COMBO BASIC BASE BOARD

DT-BASIC BASE BOARD COMBO is a module basis for the development of AVR CPU Module series with several features such as path input / output, UART, I ² C and ADC. This module can be connected with the AVR CPU Module series for simple applications to complex. In this module available 2 pcs serial UART interface with a choice of 2 voltage level is RS-232 and TTL.

Specification :

• Compatible with DT-AVR CPU Module series (up to 88 channels allocation of input / output).
• 2 pcs RJ-11 connectors for UART interface with a choice of RS-232 voltage levels and TTL.
• Available terminals to interface I ² C lines (SCL and SDA).
• Available terminal for the ADC reference voltage input.
• There are several options input supply voltage, ie 3.3 V - 5.5 V (without regulator) and 6.5 V - 12V (via a voltage regulator - on board).
• LED indicators for voltage supply.
• Capacitor using aluminum components and SMD components.
• 10 pin connector / w housing for line input / output cabling so that errors can be avoided.
• On each connector input / output available +5 V DC supply line that can facilitate the relationship with the application circuit.
• 1 set of serial cable.
• 1 piece DVD that contains a collection of manuals, schematics, and procedures for testing all products
• DT-dimensional module BASIC COMBO BOARD BASE: 11.7 cm (l) x 9.8 cm (w) x 1.7 cm (h)

20 ports SERVO MOTOR CONTROLLER

20 ports SERVO MOTOR CONTROLLER is a servo motor controller module that can control up to 20 servo motors simultaneously or sequentially. This module supports the standard or continuous servo motors. SERVO MOTOR CONTROLLER SPC provides three interface options are TTL UART, RS-232 UART, and I2C. The module is equipped with software to design movement with a certain sequence and store the sequence of movements so that the appropriate applications for robotics and other applications that use other servo motors.

Specifications:

• Can be used to control up to 20 servo motors simultaneously or sequentially.
• Supports standard type servo motors and continuous.
• Resolution of the servo control pulses of 1 us.
• Supports slim servo capability so the user can adjust the speed of each servo motor individually.
• Provides the ability to read the pulse control (position) servo, Enable and Disable the servo, the ability to store and run up to 32 motion sequences, as well as the ability to save and return to the home position (default).
• Equipped with three interface options to choose from:
• TTL UART configuration with 38 400 bps, no parity (None), 8 data bits, 1 stop bit, and no flow control.
• UART RS-232 configuration with 38 400 bps, no parity (None), 8 data bits, 1 stop bit and no flow control. The module is equipped with a serial cable for connection to a computer.
• I2C bit rate (data transfer speeds) up to 100 kHz.
• In the I2C interface, 8 SERVO MOTOR CONTROLLER SPC module can be connected together on a single I2C lines for controlling the servo motors up to 8x20.
• I2C address of the hardware settings via configuration jumpers.
• Equipped with an explanation of the Command Set is used to access the module.
• Equipped with GUI (Graphical User Interface) which consists of two parts:
• SEQUENCE EDITOR can be used to design the sequence of movement of the servo motor.
• COMMAND Tester can be used to test the command set via the RS-232 UART interface.
• Separate power supply module with power supply and servo motors are equipped with LED power indicator.
• Equipped with a chip EMI filter to reduce noise power supply.
• Pin & servo power supply module and pin TTL UART & I2C interface using blue terminals so as to facilitate the process of wiring.
• Power supply module Range: 6.5 to 12 VDC.
• DVD-ROM contains product manuals, schematic of the circuit, datasheet, tester program
• Dimensional of module SERVO MOTOR CONTROLLER: 8.3 cm (l) x 6.3 cm (w) x 1.8 cm (h).