
Saturday, January 30, 2010
Friday, January 29, 2010
Blade Cutter V750
Wednesday, January 27, 2010
ATtiny2313
ATtiny2313 8-bit Microcontroller with 2K Bytes In-System Programmable Flash.
Features
• Utilizes the AVR® RISC Architecture
• AVR – High-performance and Low-power RISC Architecture
– 120 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
• Data and Non-volatile Program and Data Memories
– 2K Bytes of In-System Self Programmable Flash Endurance 10,000 Write/Erase Cycles
– 128 Bytes In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– 128 Bytes Internal SRAM
– Programming Lock for Flash Program and EEPROM Data Security
• Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
– Four PWM Channels
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– USI – Universal Serial Interface
– Full Duplex USART
• Special Microcontroller Features
– debugWIRE On-chip Debugging
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low-power Idle, Power-down, and Standby Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
• I/O and Packages
– 18 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC, 20-pad QFN/MLF
• Operating Voltages
– 1.8 – 5.5V (ATtiny2313V)
– 2.7 – 5.5V (ATtiny2313)
• Speed Grades
– ATtiny2313V: 0 – 4 MHz @ 1.8 - 5.5V, 0 – 10 MHz @ 2.7 – 5.5V
– ATtiny2313: 0 – 10 MHz @ 2.7 - 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
• Typical Power Consumption
– Active Mode
1 MHz, 1.8V: 230 μA
32 kHz, 1.8V: 20 μA (including oscillator)
– Power-down Mode
< 0.1 μA at 1.8V
Features
• Utilizes the AVR® RISC Architecture
• AVR – High-performance and Low-power RISC Architecture– 120 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
• Data and Non-volatile Program and Data Memories
– 2K Bytes of In-System Self Programmable Flash Endurance 10,000 Write/Erase Cycles
– 128 Bytes In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– 128 Bytes Internal SRAM
– Programming Lock for Flash Program and EEPROM Data Security
• Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
– Four PWM Channels
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– USI – Universal Serial Interface
– Full Duplex USART
• Special Microcontroller Features
– debugWIRE On-chip Debugging
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low-power Idle, Power-down, and Standby Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
• I/O and Packages
– 18 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC, 20-pad QFN/MLF
• Operating Voltages
– 1.8 – 5.5V (ATtiny2313V)
– 2.7 – 5.5V (ATtiny2313)
• Speed Grades
– ATtiny2313V: 0 – 4 MHz @ 1.8 - 5.5V, 0 – 10 MHz @ 2.7 – 5.5V
– ATtiny2313: 0 – 10 MHz @ 2.7 - 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
• Typical Power Consumption
– Active Mode
1 MHz, 1.8V: 230 μA
32 kHz, 1.8V: 20 μA (including oscillator)
– Power-down Mode
< 0.1 μA at 1.8V
Saturday, January 23, 2010
iMCU7100 EVB
Tuesday, January 19, 2010
ROBOBOX 3.0
ROBOBOX 3.0 is an intelligent robot kit that is ideal for beginners and suitable for everyone who wants to learn about robotics. A compact programmable microcontroller board acts to control the workings of the robot and users use the friendly LOGO language in either text or graphical icons making it ideal for those with no previous programming experience.
Features:
* Quick and easy to assemble - no soldering required.
* Programmed using easy-to-use LOGO language - ideal for robot beginners, those with no programming experience and use in schools and colleges.
* Complete packages including everything required to build and operate five different robot projects.
* Experiments cover simple wheel and track-based robots, light-following and line-tracing techniques plus use in sumo and fire-fighting competitions.
* Supplied with detailed and easy-to-follow documentation covering robot assembly and programming.
* Wide range of optional interface boards and sensors available.
Five Robot Projects
1 - COMPACT-BOT - a simple wheeled robot that detects collisions using touch sensors.
2 - LIGHT-BOT - a wheeled robot that detects and follows a light source.
3 - PICOTANK-BOT - a track-based robot that follows a line.
4 - SUMOTANK-BOT - a track-based robot for sumo competitions.
5 - SUMOPACT-BOT - a wheel-based robot for sumo competitions.
link in rosesana.indonetwork.co.id
Features:* Quick and easy to assemble - no soldering required.
* Programmed using easy-to-use LOGO language - ideal for robot beginners, those with no programming experience and use in schools and colleges.
* Complete packages including everything required to build and operate five different robot projects.
* Experiments cover simple wheel and track-based robots, light-following and line-tracing techniques plus use in sumo and fire-fighting competitions.
* Supplied with detailed and easy-to-follow documentation covering robot assembly and programming.
* Wide range of optional interface boards and sensors available.
Five Robot Projects
1 - COMPACT-BOT - a simple wheeled robot that detects collisions using touch sensors.
2 - LIGHT-BOT - a wheeled robot that detects and follows a light source.
3 - PICOTANK-BOT - a track-based robot that follows a line.
4 - SUMOTANK-BOT - a track-based robot for sumo competitions.
5 - SUMOPACT-BOT - a wheel-based robot for sumo competitions.
link in rosesana.indonetwork.co.id
Friday, January 15, 2010
Devantech SRF05 Ultra-Sonic Ranger

The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is fully compatible with the SRF04. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05 to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05 operates with separate trigger and echo pins, like the SRF04. The SRF05 includes a small delay before the echo pulse to give slower controllers such as the Basic Stamp and Picaxe time to execute their pulse in commands.
Wednesday, January 13, 2010
ATMega128 minimum system
The minimum system ATMega128 with the following
specifications:

- 128 Kb Flash PEROM
- 4Kb EEPROM
- 4Kb SRAM
- On Chip Analog Comparator
- 8 Channel 10 bit ADC
- 2 8-bit PWM
- 6 Programmable PWM resolution (2-16 bit)
- Dual Programmable UART
- SPI Interface
- Programmable Watchdog with On Chip Oscillator
- Adjustable VREF ADC
- 53 bit I / O
- Power On Reset and Programmable Brown out detection
- Internal Calibrated RC Oscillator
- Package including ISP cable, RS232 cable and CD
PACKAGE Contain:
- DST-128 Module AVR Stamp
- CD
- DU-ISP V2
- USB Cable
- Target Cable
- RS232 Cable
- User Manual
specifications:

- 128 Kb Flash PEROM
- 4Kb EEPROM
- 4Kb SRAM
- On Chip Analog Comparator
- 8 Channel 10 bit ADC
- 2 8-bit PWM
- 6 Programmable PWM resolution (2-16 bit)
- Dual Programmable UART
- SPI Interface
- Programmable Watchdog with On Chip Oscillator
- Adjustable VREF ADC
- 53 bit I / O
- Power On Reset and Programmable Brown out detection
- Internal Calibrated RC Oscillator
- Package including ISP cable, RS232 cable and CD
PACKAGE Contain:
- DST-128 Module AVR Stamp
- CD
- DU-ISP V2
- USB Cable
- Target Cable
- RS232 Cable
- User Manual
Tuesday, January 05, 2010
Catalyst 3508G (WS-C3508G), used
The Catalyst 3508G XL eight-port stackable Gigabit Ethernet switch is a member of the Cisco Systems Catalyst 3500 series XL, a scalable line of stackable 10/100 and Gigabit Ethernet switches that delivers best-in-class performance, manageability, and flexibility with unparalleled investment protection. The
Catalyst 3508G XL switch features eight Gigabit Interface Converter (GBIC)-based 1000BaseX ports and a 10-Gbps switching fabric. These features make this switch ideal for either high speed wiring closet stack aggregation or a distribution layer Gigabit Ethernet aggregation switch. The switch is easy to deploy, either on a desktop or in a wiring closet, and features Cisco IOS software support. Administration of the Cisco desktop Catalyst switches is made even more convenient via Cisco Switch Clustering technology.
Catalyst 3508G XL switch features eight Gigabit Interface Converter (GBIC)-based 1000BaseX ports and a 10-Gbps switching fabric. These features make this switch ideal for either high speed wiring closet stack aggregation or a distribution layer Gigabit Ethernet aggregation switch. The switch is easy to deploy, either on a desktop or in a wiring closet, and features Cisco IOS software support. Administration of the Cisco desktop Catalyst switches is made even more convenient via Cisco Switch Clustering technology.
Cisco WS-C3548-XL-EN 3500 switch 48-port 10/100 ,used
The Cisco Systems Catalyst 3500 series XL is a scalable line of stackable 10/100 and Gigabit Ethernet switches that deliver premium performance, manageability, and flexibility, with unparalleled investment protection. This line of low-cost, high-performance switching solutions provides next-generation stackable switching. Catalyst 3500 XL stacks allow management of all switched ports
from a single IP address and provide interconnected switches with an independent high-speed stack bus that preserves valuable desktop ports. Cisco Catalyst 3500 series XL switches take stacking to a new level with revolutionary Cisco Switch Clustering technology and GigaStack GBICs. With Cisco Switch Clustering, users can manage over 380 ports from a single IP address, and connect up to 16 switches, regardless of physical location, with a broad range of Ethernet, Fast Ethernet, and Gigabit Ethernet media. Cisco Switch Clustering is supported on all Catalyst 3500 XL, 2900 XL and Catalyst 1900 switches. All Catalyst 3500 series XL switches feature Cisco IOS software and Cisco Visual Switch Manager (CVSM) software, an easy-to-use Web-based management interface. All high-performance Catalyst 3500 series XL switches are available in either Standard or Enterprise Editions. Enterprise Edition switches offer advanced software features, including complete 802.1Q and ISL VLAN support, TACACS+ security, and fault tolerance through Uplink Fast.
from a single IP address and provide interconnected switches with an independent high-speed stack bus that preserves valuable desktop ports. Cisco Catalyst 3500 series XL switches take stacking to a new level with revolutionary Cisco Switch Clustering technology and GigaStack GBICs. With Cisco Switch Clustering, users can manage over 380 ports from a single IP address, and connect up to 16 switches, regardless of physical location, with a broad range of Ethernet, Fast Ethernet, and Gigabit Ethernet media. Cisco Switch Clustering is supported on all Catalyst 3500 XL, 2900 XL and Catalyst 1900 switches. All Catalyst 3500 series XL switches feature Cisco IOS software and Cisco Visual Switch Manager (CVSM) software, an easy-to-use Web-based management interface. All high-performance Catalyst 3500 series XL switches are available in either Standard or Enterprise Editions. Enterprise Edition switches offer advanced software features, including complete 802.1Q and ISL VLAN support, TACACS+ security, and fault tolerance through Uplink Fast.
Subscribe to:
Posts (Atom)




