Saturday, May 30, 2009

PFH-9210-660

PFH-9210-660 Long Range RFID Reader For Reading Active Tags ( 6M ) & EM Proximity Card ( 40CM )

Product Description:

* With two kinds of operation frequency, it can work with both active handfree card (UHF) and EM proximity card (125KHz).
* The Pegasus PFH-9210-660 is an advanced and Hi-technology reader for vehicle, personal access and logistic management applications.
* Especially for vehicle control, the RFID Hand free card can be stick to any where within the car except on the metal, no need to get off the car or open the window for access.
* Epoxy potted for environmental protection.
* Weather resistant and water proof.


Specifications:

* Interface: RS-485, RS -232C , Wiegand or Pegasus format.
* Frequency of Operation:
125KHz & 433.9 MHz(315MHz, 915MHz optional) for Active Tags 125KHz for EM proximity card
* Reading Cards:
PFH-620 series(S/N:320, 620, 660) hand free cards in compact size with powerful battery for long life use (about 3 years under normal operation) or EM proximity cards(125KHz).
* Reading Range :
Max. 60~70 cm for EM card (According to card).
Max. 6 meters for Hand Free card (active tags)
* Epoxy potted for environmental protection
* Mounting: Surface Mount, Weather resistant and waterproof
* Indicators: Red LED (power), Green LED (status), Orange LED (standby)
* Power Requirements: DC15V, 300 mA ( AC110~220V DC15V( 1A ))
* Operating Temperature: -20°C ~ 60°C
* Humidity: 10% ~ 90%RH, non condensing
* Dimension: 270 (L) x 270 (W) x 39 (H) mm
* Weight: 2 kg ± 5%
* Certifications: FCC, CE

Friday, May 22, 2009

RFID Animal Glass Capsule Tag

A pet identification tag with associated cavity holder for insertion of a miniaturized Radio-frequency identification (“RFID”) transponder capsule. The tag has an embedded cavity and mechanism to insert or remove an optional RFID transponder capsule. The tag with transponder capsule can then be attached to a pet's collar to wireless ID the pet without need to medically inject a RFID transponder capsule into a pet's body by surgical means.

Wristbands RFID tag

Wristbands are encircling strips worn on the wrist, made of any of a variety of materials depending on the purpose. The term can be used to refer to the bracelet-like band of a wristwatch, to the cuff or other part of a sleeve that covers the wrist, or to decorative or functional bands worn on the wrist for other reasons.

Another common type of wristband is the loops of plastic or tyvek that are placed around the wrist for identification purposes (demonstrating the wearers authorization to be at a venue, for example).

13.56MHz. RFID Plastic Wrist Band Tag, Mifare1 S50
Type: Contactless Read/Write
Operating Frequency: 13.56 MHz.
Capacity: 1Kbit
Common Usage: Heathcare, Security, Access control
Standard Deployment: Ticketing, Hospital Heathcare
Tested Read Range: 2.5 ~10 cm
Multi-Detection: No
Size: 34 x 293 x 13 mm
Material: PVC or Paper
Color: Allow user to select
Weight: 1g ± 0.5 g
Compliance: Mifare1 S50
Regulatory Specifications: ISO/IEC 14443-A
Operating Specifications: Waterproof and dustproof
Resistance to immersion in salt water, alcohol, oil, 10% HCL,
Ammonia =
Shock – Dependant on packaging
Vibration – Dependant on packaging
Temperature – Storage –40°C to 85°C

- Operating -25°C to 70°C

===============
13.56MHz. RFID Plastic/Silicon Wrist Band Tag, Mifare1 S50

Type: Contactless Read/Write
Capacity: 1Kbit
Operating Frequency: 13.56 MHz.
Standard Deployment: Access control, Healthcare, etc.
Tested Read Range: 3~50cm, varying on the reader used
Size: ?65mm ?74mm
Material: Soft Silicon
Color: Black, White, Red, etc
Features Waterproof, dustproof, and High temperature Resistance
Weight: 5g
IC used: MF1 S50( available in other types)
Compliance: ISO 14443A
Operating Temperature: -40°C to 90°C, Stand up 200°C for 6hrs
Storage Temperature: -40°C to 85°C

ICODE Paper RFID Tag


13.56 MHZ High Frequency (HF) ICODE EPC Paper RFID Tag


Type: Contactless Read/Write
Operating Frequency: 13.56 MHz. (HF-High Frequency)
Capacity: 96 bit EPC
Data Coding Type: IC dependant
Common Usage: Retail item level applications
Standard Deployment: Electronic label application, Electronic Article Surveillance
Tested Read Range: Maximum 10cm Read and Write 5cm Detection (The distance may vary depend upon the environment)
Multi-Detection: Yes
Max read quantity: 30 labels/sec
Size: 25mm x 20mm
Material: Opaque matt paper 79
Color: White
Weight: 0.5g
Compliance: ICODE, SLI
Regulatory Specifications: ISO 15693 (transponder standard)
Operating Specifications: Waterproof and dustproof
Resistance to immersion in salt water, alcohol, oil, 10% HCL,
Ammonia =
Shock – Dependant on packaging
Vibration – Dependant on packaging
Temperature – Storage –40°C to 85°C
- Operating -25°C to 70°C

quadruped robot kit

This excellent quadruped robot kit includes all of the components you need to build your own four-legged, walking robot. Each leg has two degrees of freedom provided by a lifting servo and a forward/backward rotating servo. Eight servos provide enough degrees of freedom for you to explore various four-legged walking gaits and motions; make it scamper across the floor, turn in circles, or do a victory dance.

With all mechanical components, a 16-servo controller, PC software, and a download cable included, this walking robot kit is very complete: the only thing you need to add is five standard, AA size batteries. NiMH cells are recommended because of the high current consumption of the robot. This kit is equivalent to the hexapod monster without one of the body segments, the tail, and the gripper (even the packaging is the same, making it seem as if some parts are missing when you first open the box). However, it is an economical alternative and developing gaits for four legs is an exciting challenge.

All of the components are precision molded, and you won’t need to tape or glue anything in place. All you will need are a small phillips screwdriver (though wire cutters might make things a bit easier). Assembly time is under 2 hours, even for a beginner. The only criticism we have of the kit is that the instructions are incomplete and apparently written by a non-native English speaker, but the kit is simple enough that the drawings alone should be sufficient. We can assist our customers with any assembly problems, and we will be posting additional tips soon.

The included software allows you to manipulate the servos and store sequences of positions. A sequence of up to 60 positions can then be downloaded and stored in the servo controller so that the robot can move without being tethered to a computer. Of course, you can instead provide your own control system and sensors to make a completely autonomous robot. (The servos are compatible with regular radio control model servos, so all you need to control them is a 1-2 ms, 5-volt pulse repeated every 20 ms.)

Note: The Joinmax Digital quadruped is a kit; assembly is required. Five AA batteries are required but not included.

Tuesday, May 19, 2009

Sierra Wireless AirCard 885u

Sierra Wireless AirCard 885u
Compact form factor Internal antenna Connect to USB port or docking cradle Worldwide use - HSDPA & UMTS, quad band EDGE/GPRS Supported OS: Windows Vista, XP, 2000 and Mac OS X
* Wireless download speed up to 7.2 Mbps and upload to 2 Mbps (upgradeable to 5.76 Mbps)
* Support GPS (Global Positioning System)
* Familiar USB connection
* Small, durable, fixed design
* microSD memory expansion slot
* TRU-Install, automatic software installation

Wednesday, May 13, 2009

Pigtail SMA-Reverse Polarity to N-Male


Pigtail SMA-Reverse Polarity to N-Male 60cm Length.

ENCLOSURE IP66 standard



ENCLOSURE IP66 standard, size 175 x 250 x 75mm , waterproof , 1 pair mounting, PG21 cable gland.

for outdoor box , wifi or other outdoor equipment.

protect from dust, weather and others. PG21 protect your power cable and or LAN cable and save forward.




Tuesday, May 12, 2009

ATmega32

8-bit Microcontroller with 32K Bytes In-System Programmable Flash

Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 32K Bytes of In-System Self-programmable Flash program memory
– 1024 Bytes EEPROM
– 2K Byte Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
– Real Time Counter with Separate Oscillator
– Four PWM Channels
– 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels in TQFP Package Only
2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
– Byte-oriented Two-wire Serial Interface
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
• Operating Voltages
– 2.7 - 5.5V for ATmega32L
– 4.5 - 5.5V for ATmega32
• Speed Grades
– 0 - 8 MHz for ATmega32L
– 0 - 16 MHz for ATmega32
• Power Consumption at 1 MHz, 3V, 25°C for ATmega32L
– Active: 1.1 mA
– Idle Mode: 0.35 mA
– Power-down Mode: < 1 μA

ATmega16

8-bit AVR Microcontroller with 16K Bytes In-System Programmable Flash.

Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 16K Bytes of In-System Self-programmable Flash program memory
– 512 Bytes EEPROM
– 1K Byte Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
– Real Time Counter with Separate Oscillator
– Four PWM Channels
– 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels in TQFP Package Only
2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
– Byte-oriented Two-wire Serial Interface
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
• Operating Voltages
– 2.7 - 5.5V for ATmega16L
– 4.5 - 5.5V for ATmega16
• Speed Grades
– 0 - 8 MHz for ATmega16L
– 0 - 16 MHz for ATmega16
• Power Consumption @ 1 MHz, 3V, and 25°C for ATmega16L
– Active: 1.1 mA
– Idle Mode: 0.35 mA
– Power-down Mode: < 1 μA

AT89STK evaluation board by ATMEL


The Flash Evaluation Board dedicated to the AT89C5130/31A and the AT8xC5122D USB microcontrollers. This board is designed to enable an easy evaluation of the Mass Storage USB class using demonstration firmware (refer to firmware Guide). It must be plugged to a CPU board (AT89C5130/31A or AT8xC5122 D evaluation board).

Features

The Flash evaluation board provides the following features:
�� Support the following microcontrollers :
– AT89C5130A
– AT89C5131A
– AT8xC5122D

�� No external power supply required
– Power supplied by the USB line via the CPU board (AT89C5130/31A or AT8xC5122 D evaluation board)
�� On board DataFlash memory (ATMEL AT45DB321B, 4MB)
�� Support Nand Flash memory (MICRON MT29F2GO8AABWP, 256MB) - Add-on board
�� Support Pluggable DataFlash Card (ATMEL AT45DCB004C, 4 MB)

Monday, May 11, 2009

EVB8051 Development KIT

Feature

- Full-duplex Data Transfer up to 1Mbps with AT89C51RD2 (16MHz, X2
Mode)
- Internet Application Protocols: ANSI C Source Codes such as DHCP, HTTP, DNS, etc.

Specification

Category Specification
MB-EVB8051 MCU AT89C51ED2
- 64K Bytes in-system programmable (ISP) Flash
CLOCK 16MHz Crystal (up to 30Mhz)
External Memory SRAM (32K Bytes)
EEPROM 24C02 (for storing network information)
UART RS232 1 Serial Port (for Debugging & ISP)
Display Text LCD (Gray, 2X16)
PAL 16v8 (for address decoder)
NM7010A TCP/IP W3100A-LF
PHY IP101A-LF (Ethernet PHY)
Mag Jack LU1T516-43 (Transformer + RJ45 + 2 LEDs)

Thursday, May 07, 2009

Sierra AIRCARD® 881U USB MODEM WIRELESS WIDE-AREA USB MODEMS FOR HSPA NETWORKS

Sierra Wireless is a recognized industry leader in developing wireless data products and enabling software. Sierra Wireless modems and software connect people all over the world with mobile broadband networks that keep them in touch, informed, and productive from wherever they need to be. The Company offers a diverse product portfolio addressing enterprise, consumer, original equipment manufacturer, machine-to-machine, and specialized vertical industry markets. Sierra Wireless also provides professional services to customers requiring expertise in wireless design, integration, and carrier certification.

Sierra AIRCARD® 881U USB MODEM WIRELESS WIDE-AREA USB MODEMS FOR HSPA NETWORKS

Technical Specifications

Technology
USB Modem (USB Port)
MSM 7200 Chipset
UMTS with HSDPA Category 8/6/12 (7.2/3.6/1.8 Mbps downlink)
HSUPA Category 5 (2.0 Mbps uplink)EDGE/GPRS MS Class 12
WCDMA receive equalizer with dual antenna diversity

Bands
850/1900/2100MHz WCDMA Power class 3 (+24dBm)
850/900MHz GSM/GPRS/EDGE GSM Power class 4/EDGE E2
1800/1900 MHz GSM/GPRS/EDGE GSM Power Class 1/EDGE E2
GPS/1575 MHz

Operating System Support
Windows® Vista, XP, 2000,Mac OS X

Dimensions
93mm (L) 39mm (W) x 20mm (H)
Weight: 60 grams (includes battery)

Skit-dsPIC30F


dsPIC30F microcontroller Starter kit
This is the next generation of PIC microcontroller experiment kit. An Upgrade to a 16-bit, “dsPIC” is a part of the Digital Signal Controller from MICROCHIP.

Skit-dsPIC30F [dsPIC30F microcontroller Starter kit] features:
• Supports the dsPIC 28/40-pin DIP and can experiment both in same time.
• Support multi-contoller operation • Selection of RUN/PROG mode by switch
• Clock rate of 7.3728MHzfor 28-pin and 4MHz for 40-pin dsPIC
• Debug and program via ICD jack with ICDX-30 or ICD2

Includes : ICDX-30 In-circuit Debugger/Programmer (operation same ICD2) with ICD2 cable, NX-dsPIC30F Experiment board, CX-232 Serial port cable, LCD module 16x2, Hook-up wire box, 2 of 12Vdc 500mA adaptor, Software CD and Documentation.

Moving Display with Local Assembling

Moving Display with Local Assembling

Code Name : MDI-1603
Type : Indoor
Color : Red
Character View : 1 x 16 char / line
Character Height : 1.2”
Control Interface : RS-232 PC
Display Dimension : 430x32mm
Box Dimension : 480x60x35mm

Code Name : MDI-1206
Type : Indoor
Color : Red
Character View : 1 x 12 char / line
Character Height : 2.0”
Control Interface : RS-232 PC & Keyboard
Display Dimension : 540x60mm
Box Dimension : 600x90x50mm

Code Name : MDI-1606
Type : Indoor
Color : Red
Character View : 1 x 16 char / line
Character Height : 2.0”
Control Interface : RS-232 PC & Keyboard
Display Dimension : 720x60mm
Box Dimension : 780x90x50mm

Code Name : MDI-2406
Type : Indoor
Color : Red
Character View : 1 x 24 char / line
Character Height : 2.0”
Control Interface : RS-232 PC & Keyboard
Display Dimension : 1090x60mm
Box Dimension : 1150x90x50mm

Code Name : MDI-3206
Type : Indoor
Color : Red
Character View : 1 x 32 char / line
Character Height : 2.0”
Control Interface : RS-232 PC & Keyboard
Display Dimension : 1440x60mm
Box Dimension : 1500x90x50mm

Code Name : MDI-4006
Type : Indoor
Color : Red
Character View : 1 x 40 char / line
Character Height : 2.0”
Control Interface : RS-232 PC & Keyboard
Display Dimension : 1850x60mm
Box Dimension : 1920x90x50mm

Code Name : MDI-1610
Type : Indoor
Color : Red
Character View : 1 x 16 char / line
Character Height : 4.0"
Control Interface : RS-232 PC & Keyboard
Display Dimension : 1440x100mm
Box Dimension : 1500x140x50mm

Code Name : MDI-2110
Type : Indoor
Color : Red
Character View : 1 x 21 char / line
Character Height : 4.0"
Control Interface : RS-232 PC & Keyboard
Display Dimension : 1900x100mm
Box Dimension : 1960x140x50mm

Code Name : MDI-2610
Type : Indoor
Color : Red
Character View : 1 x 26 char / line
Character Height : 4.0"
Control Interface : RS-232 PC & Keyboard
Display Dimension : 2360x100mm
Box Dimension : 2420x140x50mm

Code Name : MDI-3110
Type : Indoor
Color : Red
Character View : 1 x 31 char / line
Character Height : 4.0"
Control Interface : RS-232 PC & Keyboard
Display Dimension : 2820x100mm
Box Dimension : 2880x140x50mm

Code Name : MDI-3610
Type : Indoor
Color : Red
Character View : 1 x 36 char / line
Character Height : 4.0"
Control Interface : RS-232 PC & Keyboard
Display Dimension : 3280x100mm
Box Dimension : 3340x140x50mm

Code Name : MDS-1620
Type : Semi Outdoor
Color : Red
Character View : 1 x 16 char / line
Character Height : 8.0"
Control Interface : RS-232 PC
Display Dimension : 2580x200mm
Box Dimension : 2960x360x155mm

All Moving Display covered with aluminum enclosure, Input power 220VAC, memory life time up to ten years and full one year guarantee. other articles found here

Monday, May 04, 2009

Surabaya Shopping Festival May 2009

Celebrate Surabaya Shopping Festival May 2009! Get discounted goods from 2R Hardware & Electronics for this month (May 2009). More free Offer and discounted products for celebrating 716 anniversary of Surabaya City.
For More Information , just email to rosesana [at] yahoo dot com OR rosesana [at] gmail dot com